Clamp
Хомут
Abrazadera
The Shacman Clamp BY90003989315 is an essential, precision-engineered fastening component designed to secure hoses and lines throughout your Shacman truck’s various fluid and air systems. This genuine OEM part, identified by the exact reference number BY90003989315, provides a reliable, vibration-resistant seal that prevents leaks and ensures system integrity. In the demanding world of heavy-duty trucking, a seemingly small component like a clamp plays an outsized role in preventing costly downtime and repairs. Using the correct Shacman clamp, such as BY90003989315, guarantees the specified clamping force, material compatibility, and corrosion resistance required for long-term, trouble-free operation of cooling, fuel, air, and hydraulic circuits.
Manufactured from high-quality materials to exacting Shacman specifications, this clamp offers superior durability and performance compared to generic alternatives. Its design ensures even pressure distribution, preventing hose damage and maintaining a perfect seal under constant vibration, thermal cycling, and pressure fluctuations, safeguarding your vehicle’s performance and reliability.
| Parameter | Specification / Value |
|---|---|
| OEM Part Number | BY90003989315 |
| Product Name | Clamp |
| Brand | Shacman |
| Primary Material | Stainless Steel or Zinc-Plated Carbon Steel |
| Clamp Type | Worm-Drive (Hose Clamp) / Constant-Tension Spring Clamp |
| Diameter Range | Specific to Application (e.g., 20-40mm) |
| Band Width | Typically 8mm, 10mm, or 12mm |
| Application | Coolant Hoses, Air Intake Ducts, Fuel Lines, Heater Hoses |
| Operating Temperature | -40°C to +150°C (Material Dependent) |
| Key Feature | Vibration-Resistant, Uniform Sealing Pressure, Anti-Corrosion |
Clamps are fundamental to the reliability of a truck’s fluid and pneumatic systems. Their core function is to create a secure, leak-proof connection between a hose and its fitting.
A precision clamp like BY90003989315 applies consistent radial pressure around the hose circumference. This prevents slippage under pressure and system vibrations.
In cooling systems, a failed clamp can lead to catastrophic coolant loss and engine overheating. In fuel systems, it can cause dangerous leaks and performance issues.
Beyond preventing leaks, a proper clamp also protects the hose from abrasion and wear by holding it firmly in its intended position, away from hot or sharp components.
A weakened clamp loses tension, allowing microscopic hose movement. This eventually leads to seepage, fluid loss, and air ingress into systems.
Complete clamp failure can cause a hose to detach suddenly. This results in immediate and total loss of system function, often stranding the vehicle.
Using an incorrectly sized or weak clamp applies uneven pressure. This can deform the hose, creating a stress point that leads to premature failure.
Shacman clamps are engineered for the harsh environment of a heavy-duty truck. Materials are chosen for strength, durability, and corrosion resistance.
Stainless steel offers excellent long-term resistance to rust and chemicals. Zinc-plated steel provides a cost-effective and durable barrier against corrosion.
Worm-drive clamps feature a rolled band edge to prevent cutting into the hose. The screw threads are precision-formed for smooth adjustment and secure locking.
Spring clamps (constant-tension) are designed to maintain pressure despite hose swelling and shrinkage from temperature changes, common in cooling systems.
Truck engines generate significant vibration. The clamp’s design, including its locking mechanism, is tested to resist self-loosening over millions of cycles.
The genuine BY90003989315 is manufactured to maintain its clamping force indefinitely under normal operating conditions, ensuring a permanent seal.
Materials are validated to withstand under-hood temperatures, exposure to oils, fuels, coolants, and road salts without degrading.
The clamp BY90003989315 is not a generic part. It is specified for particular hose diameters, system pressures, and locations on Shacman trucks.
Using the correct OEM clamp ensures the hose is compressed optimally—enough to seal, but not so much as to damage the hose reinforcement.
The clamp’s size and profile are designed to fit in specific, often tight, spaces within the engine bay without interfering with adjacent components.
Always replace a clamp with the exact OEM number. This guarantees the mechanical properties and dimensions intended by Shacman’s engineers.
Clamps for coolant systems must resist ethylene glycol and high temperatures. Fuel system clamps must be compatible with diesel and biodiesel blends.
Air intake clamps must seal effectively without cracking rubber or silicone couplers. The right material prevents chemical degradation.
The genuine Shacman clamp is validated for its specific application, ensuring long-term reliability and preventing premature failure.
Proper installation is crucial. For worm-drive clamps, position the clamp so the tightening screw is accessible for future inspection and adjustment.
Center the clamp band on the hose bead or nipple. Tighten the clamp securely, but avoid over-tightening, which is a common cause of failure.
Over-tightening can cut the hose, strip the threads, or distort the clamp band, creating a point of weakness that will fail under vibration.
During routine maintenance, inspect all clamps for corrosion, cracks, or looseness. Re-torque screw clamps if necessary, especially after hose replacement.
Always replace the clamp when replacing a hose. Reusing an old clamp on a new hose is not recommended due to metal fatigue and loss of tension.
Replace any clamp that shows heavy rust, a distorted band, stripped threads, or signs of excessive stress. These are indicators of impending failure.
If a connection is leaking, the clamp is often the culprit. Replacing it with a new BY90003989315 can frequently solve the leak without hose replacement.
Visible Fluid or Air Leaks: Dampness, drips, or hissing sounds at a hose connection are the most direct signs of clamp failure.
Excessive Hose Movement: If a hose can be twisted or slid on its fitting by hand, the clamp is not providing adequate clamping force.
Visible Damage: Severe rust, a broken band, a missing screw, or a clamp that is clearly distorted are visual cues for immediate replacement.
System Performance Issues: Engine overheating (coolant leak) or loss of air pressure (air leak) can sometimes be traced back to a failed clamp.
During every service interval, perform a visual and tactile inspection of all accessible clamps. Look for corrosion and feel for wetness.
Pay special attention to clamps near heat sources (exhaust) or in areas exposed to road spray, as these conditions accelerate wear.
Listen for tell-tale hissing from air system connections when the brakes are applied or the suspension is adjusting.
Generic clamps often use lower-grade steel with poor or thin plating. This leads to rapid rusting and loss of structural integrity.
The screw threads on inexpensive worm-drive clamps are often poorly machined, prone to stripping, and can loosen under vibration.
The band edges on cheap clamps can be sharp, cutting into the hose over time and creating a leak path or causing the hose to fail.
The genuine BY90003989315 is manufactured to precise tolerances with quality-controlled materials, ensuring reliable, long-lasting performance.
The small savings from a generic clamp are quickly erased by the cost of a tow and repair when it fails, causing a leak or breakdown.
A failing clamp can destroy an otherwise good hose by cutting into it or allowing it to blow off and be damaged, doubling repair costs.
For fleet managers, standardizing on genuine Shacman clamps like BY90003989315 reduces unexpected failures and simplifies parts inventory.
Secure hose connections are a direct safety concern. A burst coolant hose can spray scalding fluid. A detached air brake hose can cause brake failure.
Using the correct, high-quality clamp is a simple, effective risk mitigation strategy. It is a critical component in a safe vehicle operation.
Regular inspection and proactive replacement of clamps should be integral to every preventive maintenance schedule for commercial vehicles.
In regulated transport operations, using OEM-specified parts like BY90003989315 demonstrates a commitment to safety and compliance.
Reliability is built on attention to detail. Specifying the right clamp for every connection is a foundational detail for a leak-free truck.
A vehicle free of fluid and air leaks operates more efficiently, is cheaper to maintain, and presents a more professional image.
Investing in genuine components for even the smallest parts fosters a culture of quality that reduces downtime and total operating cost.
The Shacman Clamp BY90003989315, while a small component, is fundamentally important for the integrity and reliability of your truck’s critical systems.
Choosing the genuine OEM part is a smart, cost-effective investment in preventative maintenance and long-term vehicle health.
Do not compromise on the quality of this vital fastener. For all clamp replacements, insist on the genuine Shacman part number BY90003989315.
Combine this high-quality clamp with proper installation techniques and a regular inspection regimen. This proactive approach will help ensure your Shacman truck operates safely, efficiently, and reliably for countless miles and years of service.
