Oil Filter Shacman
Масляный фильтр Shacman
Filtro de Aceite Shacman
The Shacman Oil Filter with OEM number BY1000424655 represents advanced filtration technology for commercial vehicle engine protection. This high-performance oil filter ensures optimal engine lubrication and contaminant removal for extended engine life. The BY1000424655 component is specifically engineered to meet the demanding requirements of heavy-duty truck operations. Its multi-stage filtration system captures harmful particles while maintaining excellent oil flow characteristics. This genuine Shacman part offers perfect compatibility with various engine models in the manufacturer’s vehicle lineup. The oil filter plays a crucial role in preventing engine wear and maintaining operational efficiency. Regular replacement with authentic BY1000424655 components ensures continuous engine protection and performance reliability. The product features advanced synthetic filter media and robust construction for superior filtration performance.
| Parameter | Specification |
|---|---|
| OEM Number | BY1000424655 |
| Brand | Shacman |
| Product Name | Oil Filter |
| Compatible Models | Shacman F3000, X3000, M3000 Series |
| Filter Type | Spin-On Full Flow |
| Height | 185 mm |
| Diameter | 115 mm |
| Thread Size | M20 x 1.5 |
| Burst Pressure | 25 bar |
| Filtration Efficiency | 99% at 30 microns |
The Shacman Oil Filter BY1000424655 incorporates multiple advanced features for superior engine protection. Its multi-layer synthetic filter media provides exceptional particle capture while maintaining optimal oil flow. The filter utilizes precision-engineered pleat design for maximum surface area and contaminant holding capacity. This design prevents premature clogging and ensures consistent filtration performance throughout the service interval. The components feature anti-drain back valve technology to prevent dry starts and engine wear. The filter includes heavy-duty steel construction with corrosion-resistant coating for durability. These features collectively enhance engine protection and extend the operational lifespan of commercial vehicle engines.
This oil filter provides exceptional filtration performance through its advanced multi-stage design. The synthetic fiber media captures microscopic particles as small as 30 microns with 99% efficiency. The depth loading technology distributes contaminants evenly throughout the filter media. The reinforced center tube maintains structural integrity under high-pressure conditions. These filtration features ensure continuous engine protection and prevent abrasive wear in critical engine components during commercial vehicle operations.
The BY1000424655 oil filter features comprehensive protection systems for reliable performance. The heavy-duty steel housing withstands vibration and pressure fluctuations in commercial applications. The nitrile rubber gasket provides secure sealing and prevents oil leaks under all operating conditions. The burst-resistant design maintains integrity during extreme pressure spikes and temperature variations. These protection features ensure consistent filtration performance and prevent system failures in demanding transportation environments.
Implementing the Shacman Oil Filter BY1000424655 provides significant operational benefits for truck owners and fleet operators. The filter ensures continuous removal of harmful contaminants from engine oil, preventing abrasive wear. It maintains optimal oil flow characteristics for proper lubrication of all engine components. The component contributes to extended engine life and reduced maintenance costs over the vehicle’s operational lifespan. The efficient filtration system helps maintain engine performance and fuel efficiency. These benefits translate to enhanced operational reliability and reduced downtime for commercial transportation businesses.
The BY1000424655 oil filter significantly enhances engine longevity and reliability through superior protection. It removes metal particles, carbon deposits, and other contaminants that cause engine wear. The consistent filtration performance maintains oil cleanliness throughout the service interval. The anti-drain back feature prevents oil starvation during engine startup. These protection features ensure extended engine component life and prevent costly engine repairs in commercial vehicle applications.
Performance maintenance represents a major benefit of this genuine Shacman oil filter. The optimal filtration efficiency maintains engine performance by preventing contaminant-related wear. The consistent oil flow ensures proper lubrication of turbochargers, bearings, and other critical components. The durable construction prevents filter failures that could lead to engine damage. These performance benefits result in maintained power output, fuel efficiency, and operational reliability for transportation operations.
The Shacman Oil Filter BY1000424655 serves diverse applications across the Shacman commercial vehicle lineup. It is essential for long-haul transportation trucks operating under continuous heavy-load conditions. The filter performs reliably in construction vehicles exposed to high dust and contaminant environments. It suits municipal vehicles including garbage trucks, utility vehicles, and public service vehicles. The component works effectively in mining and quarry operations with extreme operating conditions. It maintains filtration performance in cold climate operations where oil viscosity changes occur. These applications demonstrate the product’s versatility across different transportation segments and operating requirements.
In heavy-duty commercial applications, the BY1000424655 ensures reliable engine protection under demanding conditions. It provides consistent filtration performance for high-mileage transportation trucks. The filter maintains efficiency during continuous operation in delivery and distribution services. It withstands vibration and pressure variations encountered in various operating environments. The component performs reliably in extreme temperature conditions from desert heat to arctic cold. These capabilities make it indispensable for professional transportation and commercial vehicle operations requiring dependable engine protection.
Specialized industrial vehicles benefit significantly from this advanced oil filter technology. Mining operations use it for reliable engine protection in high-contamination environments. The filter performs in agricultural equipment operating in dusty conditions with extended service intervals. It serves construction machinery requiring robust filtration for hydraulic systems and engines. The component works in generator sets and stationary power applications needing consistent oil filtration. These applications highlight the product’s engineering robustness and adaptability to demanding industrial environments.
Proper installation of the Shacman Oil Filter BY1000424655 ensures optimal performance and engine protection. The process requires appropriate tools, equipment, and understanding of vehicle lubrication systems. Installation should occur during scheduled maintenance with the engine cool and properly supported. The mounting surface must be clean, undamaged, and free from old gasket material. All sealing surfaces should be prepared according to manufacturer specifications for proper sealing. The installation process typically takes 15-25 minutes for qualified technicians with relevant experience. Post-installation verification includes visual inspection, oil level check, and system pressure testing.
The installation process begins with comprehensive vehicle preparation and implementation of safety procedures. Position the vehicle on level ground and engage parking brakes to prevent movement during service. Drain the engine oil completely and remove the old filter using proper filter wrench tools. Clean the filter mounting surface thoroughly to ensure proper contact and sealing. Apply a thin layer of clean engine oil to the new filter’s gasket surface. Install the new BY1000424655 filter by hand until the gasket contacts the mounting surface. Tighten the filter an additional three-quarters turn according to manufacturer specifications. Refill with clean engine oil and start the engine to check for leaks and proper operation. This comprehensive procedure ensures correct installation and reliable filtration performance.
Several critical precautions ensure safe and effective filter installation and subsequent operation. Always wear appropriate personal protective equipment including gloves and safety glasses. Ensure the engine is cool before beginning filter replacement to prevent burns. Use proper filter removal tools to prevent damage to surrounding components. Verify correct filter application and compatibility before installation. Dispose of used oil and filters according to environmental regulations. These comprehensive precautions prevent installation errors and ensure long-term operational safety and reliability.
Regular maintenance ensures continuous optimal performance of the BY1000424655 oil filter throughout its service life. Replacement should occur according to manufacturer recommended intervals or oil change schedules. Visual inspection should be conducted during routine maintenance for signs of damage or leaks. Oil analysis can provide valuable information about filter performance and engine condition. Maintenance documentation should record all replacement activities, dates, and mileage intervals. These comprehensive protocols help maintain engine protection and identify potential issues before they affect engine performance.
Proper service intervals are crucial for maintaining optimal engine protection and performance. Standard replacement should occur every 15,000 kilometers or according to manufacturer specifications. Severe service conditions may require more frequent replacement intervals. Oil analysis can help determine optimal replacement schedules based on actual operating conditions. These service guidelines ensure continuous engine protection and prevent filter-related issues in commercial vehicle operations.
Following maintenance best practices optimizes filter performance and engine protection. Always use genuine Shacman filters to ensure proper fit and performance. Replace filters during every oil change to maintain continuous engine protection. Inspect the old filter for unusual contaminants that may indicate engine issues. Keep accurate maintenance records for warranty compliance and resale value. These practices ensure reliable engine operation and extended service life for commercial vehicles.
The Shacman Oil Filter BY1000424655 meets rigorous technical performance standards and quality requirements for commercial vehicles. Its filtration efficiency and durability exceed industry standards for heavy-duty engine protection. The filter maintains consistent performance across specified temperature and pressure ranges. It withstands environmental challenges, vibration, and operational stresses encountered in commercial transportation. The components maintain structural integrity, filtration efficiency, and sealing performance under maximum operating conditions. These comprehensive specifications ensure reliable performance in demanding operating environments typical of commercial truck operations.
The filter’s performance characteristics ensure reliable engine protection under various operating conditions. The multi-layer synthetic media provides consistent filtration efficiency throughout the service interval. The optimized pleat design maximizes contaminant holding capacity without restricting oil flow. The bypass valve operation ensures continuous oil flow during cold starts or filter loading. These performance properties guarantee dependable engine protection and prevent oil-related engine damage in commercial applications.
Environmental durability specifications ensure extended service life and reliable performance in harsh conditions. The filter operates effectively in temperature extremes from arctic cold to desert heat. All materials resist degradation from engine oils, additives, and operational contaminants. The construction withstands vibration, pressure cycling, and mechanical stress in commercial applications. The design maintains sealing integrity and filtration performance in variable weather conditions. These environmental capabilities ensure reliable operation and consistent engine protection in diverse geographic regions.
The Shacman Oil Filter BY1000424655 undergoes comprehensive quality assurance procedures and verification processes throughout manufacturing. Production processes adhere to IATF 16949 quality management system requirements and automotive industry standards. Each production batch undergoes performance testing, material verification, and dimensional inspection before shipment. Statistical process control methods ensure consistent manufacturing quality levels and performance reliability. The filter meets international safety standards, regulatory requirements, and industry specifications for commercial vehicle components. It carries appropriate automotive certifications, quality markings, and compliance documentation for global market distribution. These quality measures guarantee product reliability, performance consistency, and customer satisfaction.
Rigorous testing validates filter performance characteristics, durability features, and operational reliability. Environmental testing includes thermal cycling, vibration endurance, pressure cycling, and burst pressure evaluation. Performance testing covers filtration efficiency, flow rate, contaminant capacity, and bypass valve operation. Material testing includes chemical resistance, aging characteristics, and mechanical strength assessment. Life cycle testing simulates extended operation under realistic vehicle conditions and usage patterns. Vehicle validation testing ensures complete compatibility and reliable performance with Shacman engine systems. These comprehensive testing protocols confirm the product meets all design specifications and customer expectations.
The BY1000424655 oil filter includes comprehensive warranty coverage, customer protection, and support services from Shacman. Technical support, troubleshooting assistance, and operational guidance are available through authorized dealer networks worldwide. Complete documentation includes installation guides, maintenance manuals, specifications, and troubleshooting procedures. Replacement parts availability and supply chain support ensure minimal vehicle downtime during maintenance. Technical training resources and educational materials assist proper installation and maintenance procedures. Online technical resources and customer service portals provide additional support information. These comprehensive support services enhance customer satisfaction and ensure optimal product performance.
The Shacman Oil Filter BY1000424655 represents premium engineering, advanced design, and superior quality in engine protection systems for commercial vehicles. Its robust construction, high-performance filtration media, and precision engineering ensure reliable engine protection under demanding conditions. The multi-stage filtration system provides efficient contaminant removal, consistent performance, and extended engine life for Shacman engines. Proper installation, regular replacement, and correct maintenance procedures maximize product performance and engine protection. This genuine Shacman component offers perfect compatibility, optimal function, and seamless integration with specified vehicle models. It contributes to improved engine reliability, reduced maintenance costs, enhanced performance, and extended vehicle life. Fleet operators, transportation companies, and individual owners benefit from consistent performance, superior quality, and enhanced operational efficiency. Always choose genuine Shacman parts for optimal vehicle performance, regulatory compliance, and operational excellence in commercial transportation services.
