Front Bumper Grille
Решетка переднего бампера
Rejilla del parachoques delantero
The Shacman Front Bumper Grille with OEM numbers DZ97189621061/DZ97189621053 represents the perfect blend of protection and aesthetic design for heavy-duty trucks. This essential component serves as the primary protective barrier for the radiator and engine cooling system while enhancing the vehicle’s visual appeal. The grille DZ97189621061/DZ97189621053 is engineered to withstand road debris and environmental elements while maintaining optimal airflow for cooling efficiency.
The DZ97189621061/DZ97189621053 grille features corrosion-resistant finishes that withstand harsh environmental conditions. Enhanced structural design provides impact protection without compromising airflow requirements. Proper installation ensures optimal performance and completes the vehicle’s front-end appearance with professional styling.
| Parameter | Specification |
|---|---|
| OEM Number | DZ97189621061/DZ97189621053 |
| Product Name | Front Bumper Grille |
| Brand | Shacman |
| Compatible Models | Shacman F3000, X3000, M3000 Series |
| Material | High-Impact ABS Plastic |
| Dimensions | 1200mm × 450mm × 80mm |
| Weight | Approximately 4.8 kg |
| Color | Black (Standard) |
| Mounting Points | 12 Integrated Clips |
| UV Resistance | UV-Stabilized Material |
| Warranty Period | 24 Months |
The Front Bumper Grille DZ97189621061/DZ97189621053 features an aerodynamically optimized design that maximizes airflow to the radiator. The precisely engineered openings balance protection requirements with cooling system needs.
Strategic air channel design reduces aerodynamic drag while ensuring sufficient cooling capacity. This optimization improves overall vehicle efficiency and maintains optimal engine operating temperatures.
Manufactured from high-impact ABS plastic, this grille withstands road debris impacts without cracking or deformation. The material’s flexibility absorbs energy from minor collisions while maintaining structural integrity.
Reinforced mounting points and internal ribbing provide additional strength where needed most. This construction protects expensive cooling components while maintaining the grille’s aesthetic appearance.
UV-stabilized materials prevent fading, cracking, and deterioration from prolonged sun exposure. This protection maintains the grille’s appearance and performance throughout years of service.
Special additives in the plastic formulation resist environmental degradation from ozone and pollutants. The grille maintains its structural properties and visual appeal in diverse climatic conditions.
The Shacman Front Bumper Grille DZ97189621061/DZ97189621053 is specifically designed for multiple Shacman heavy-duty truck models. It provides essential protection and styling for various truck configurations and applications.
Primary applications include the Shacman F3000 series designed for long-haul freight transportation. These trucks benefit from the grille’s protective qualities during highway operations with potential road debris hazards.
The X3000 series trucks, known for their premium features and performance, utilize this grille for both protection and aesthetic enhancement. The component complements the vehicle’s modern design language.
M3000 series vehicles operating in construction and industrial environments require durable front-end protection. This grille withstands challenging conditions while maintaining proper cooling airflow.
The grille also serves specialized Shacman vehicles including dump trucks and utility vehicles. Each application benefits from the component’s protective qualities and professional appearance.
Compatibility extends across multiple model years, providing replacement solutions for various vehicle generations. This versatility supports comprehensive fleet maintenance and aesthetic upgrades.
Each Front Bumper Grille DZ97189621061/DZ97189621053 undergoes comprehensive quality assurance procedures. These rigorous processes ensure every unit meets Shacman’s exacting standards for durability and fitment.
Material selection begins with certified ABS plastic compounds tested for impact resistance and UV stability. Each material batch undergoes laboratory analysis to verify compliance with performance specifications.
Injection molding processes utilize precision tooling and controlled parameters for consistent production. Computer-controlled equipment maintains dimensional accuracy within tight tolerances for perfect vehicle fitment.
Surface finishing includes texturing and painting processes that enhance both appearance and durability. Each finish layer undergoes adhesion testing to ensure long-term performance.
Dimensional verification ensures all mounting points align perfectly with vehicle bumper assemblies. This precision eliminates installation challenges and guarantees proper integration with existing components.
Impact testing evaluates the grille’s resistance to road debris and minor collisions. These tests validate protective capabilities and ensure reliable performance in real-world conditions.
Final inspection includes comprehensive visual examination, fitment testing, and functional verification. Only grilles passing all quality checks receive certification for shipment to customers worldwide.
Proper installation of the Front Bumper Grille DZ97189621061/DZ97189621053 requires attention to detail and proper techniques. While designed for straightforward installation, following correct procedures ensures optimal results.
Begin by carefully removing the old grille, noting the positions and types of fasteners used. Take care not to damage surrounding components or paint surfaces during removal.
Clean the mounting surfaces on the bumper assembly to remove any dirt, debris, or old adhesive material. This ensures proper contact and alignment for the new grille installation.
Position the new grille carefully, aligning all mounting points before applying pressure. Engage integrated clips according to the manufacturer’s recommended sequence for secure attachment.
Regular cleaning maintains the grille’s appearance and prevents debris accumulation that could restrict airflow. Use mild detergents and soft brushes to avoid damaging the surface finish.
Inspect the grille during routine vehicle washing for signs of damage, cracks, or loose mounting points. Address any issues promptly to maintain proper protection and appearance.
Check mounting clip security periodically, especially after operating in rough terrain or following minor impacts. Re-secure any loose attachments to maintain proper grille positioning.
Monitor for unusual cooling system temperatures that might indicate airflow restriction through the grille. Clean any obstructions immediately to restore proper cooling performance.
The Shacman Front Bumper Grille DZ97189621061/DZ97189621053 delivers significant protective benefits that enhance vehicle reliability and appearance. These advantages contribute to both functional performance and visual appeal.
Effective debris protection prevents damage to the radiator, air conditioning condenser, and other front-end components. This protection reduces repair costs and maintains optimal cooling system performance.
Optimized airflow design ensures adequate cooling capacity even in demanding operating conditions. The grille maintains proper engine temperatures without restricting necessary air circulation.
Enhanced vehicle aesthetics improve professional appearance and brand representation. The grille’s design complements the overall vehicle styling while providing functional benefits.
UV-resistant materials maintain appearance and structural integrity despite prolonged sun exposure. This durability ensures consistent performance and appearance throughout the component’s service life.
Impact absorption capabilities reduce damage from minor collisions with road debris. The grille’s design protects more expensive components while being economically replaceable if damaged.
Easy maintenance and cleaning support long-term appearance preservation. The grille’s design facilitates routine care while maintaining its protective and aesthetic functions.
The Front Bumper Grille DZ97189621061/DZ97189621053 serves diverse industrial applications where Shacman trucks operate. Each environment presents unique challenges that this component is engineered to address effectively.
Long-haul transportation requires durable front-end protection against highway debris and environmental elements. The grille provides reliable protection during thousands of kilometers across varied road conditions.
Construction site operations demand components that withstand dust, gravel, and potential impact hazards. The grille’s robust design protects cooling systems in these challenging environments.
Mining operations benefit from the grille’s durability in extreme conditions with high particulate exposure. The component maintains protection and airflow despite intense operational demands.
Logistics and distribution centers utilize the grille for protection during frequent urban and highway operations. Consistent performance supports reliable vehicle operation in mixed driving conditions.
Municipal operations including waste management require durable components for daily vehicle use. The grille delivers reliable protection throughout demanding service cycles in varied environments.
Specialized transport operations depend on front-end protection for vehicle reliability. The grille provides essential safeguarding for trucks operating in diverse industrial applications.
The Shacman Front Bumper Grille DZ97189621061/DZ97189621053 represents engineering excellence in vehicle protection and styling components. Its precision design, durable construction, and reliable performance make it essential for front-end protection in commercial trucks.
This genuine component ensures proper radiator protection while maintaining optimal cooling airflow and enhancing vehicle appearance. The grille’s robust design withstands demanding operating conditions across various industries and applications.
Compatibility with multiple Shacman truck models provides versatility for fleet operators and maintenance facilities. The component’s precision engineering guarantees consistent performance throughout its extended service life.
Quality assurance processes ensure each unit meets original equipment specifications, providing confidence in protective performance and durability. Proper installation and maintenance procedures maximize the grille’s operational benefits.
Investing in genuine Shacman components like the Front Bumper Grille DZ97189621061/DZ97189621053 supports vehicle protection and aesthetic appeal. This commitment to quality contributes to successful commercial transportation operations and vehicle presentation.
