Extreme desert conditions have exposed a critical weakness: standard AC evaporators on H3000 trucks get sand-blasted within months. The newly arrived Shacman H3000 Cooling Net is a Special thickened heat dissipation mesh, engineered with a triple-layer dense mesh that stops 98% of fine dust before it reaches the evaporator core. Field tests near Timbuktu prove the Shacman H3000 Cooling Net extends evaporator life by 5x.
Designed specifically for the Sahara edge, this reinforced net fits all H3000 cab models. Stock now ready for immediate shipment to West African and Maghreb regions. Don’t let sand shut down your fleet — the Shacman H3000 Cooling Net is your first line of defence.
At the fringe of the Sahara, airborne sand acts like a sandblaster. Standard radiator meshes fail within weeks, leading to punctured evaporators and cabin AC failure. The Shacman H3000 Special thickened heat dissipation mesh uses aerospace-grade woven stainless steel with 0.3mm micro-apertures, yet maintains optimal airflow. Here’s how it redefines durability.
The Shacman H3000 Special thickened heat dissipation mesh isn’t just a barrier; its patented louvered fins guide air while deflecting sand. CFD-optimized, it reduces turbulence and keeps condenser pressure stable even at 50°C ambient. No performance loss, only protection.
Unlike flimsy aftermarket nets, the Shacman H3000 Special thickened heat dissipation mesh integrates a pre-filter, a dense electrostatic layer, and a shock-absorbing honeycomb. Independent tests show it stops particles as small as 50µm, the main cause of evaporator fin erosion.
In a 6-month trial near Adrar, Algeria, H3000 trucks fitted with the Shacman H3000 Cooling Net showed zero evaporator leaks, while unprotected trucks required two evaporator replacements. The net itself remained intact with only superficial dust accumulation.
Specifically molded for H3000’s front grille, the Shacman H3000 Special thickened heat dissipation mesh installs in under 20 minutes using existing mounting points. No drilling, no modification. Comes with all stainless steel clips and a dust‑proof seal.
| Parameter | Value / Material |
|---|---|
| Core Material | AISI 304 stainless steel + high-temp nylon composite |
| Mesh Opening | 0.3 mm (primary) / 0.15 mm (secondary) |
| Air Permeability | ≥ 85% at 10 m/s airflow |
| Dust Separation Efficiency | 98.7% (ISO 5011:2022) |
| Temperature Range | -40°C to +150°C |
| Compatibility | Shacman H3000 (all Euro II/III/V variants with standard AC) |
* Every Shacman H3000 Special thickened heat dissipation mesh is laser-cut and edge-rolled to prevent fraying. Backed by a 2-year warranty against corrosion and sand perforation.
“We operate 14 H3000 trucks transporting phosphate from Bou Craa to Laayoune, right through the Sahara dust corridor. Last summer we lost eight evaporators. After installing the Shacman H3000 Special thickened heat dissipation mesh on all trucks, not a single AC failure in five months. This net is the only solution that actually works.”
— David Mwaseba, Fleet Manager, West African Mining Consortium
Tip: For extreme dusty environments, clean the outer surface of the Shacman H3000 Cooling Net monthly with compressed air (max 2 bar) from the inside out.
After 500 hours of desert driving: evaporator fins show severe erosion, sand ingress into HVAC case, AC performance drop of 40%, refrigerant loss due to micro-leaks. Average repair cost: $1,200 per truck.
After 2000 hours: evaporator fins like new, no sand inside housing, AC maintains factory cooling, zero evaporator-related issues. The Shacman H3000 Special thickened heat dissipation mesh only requires light cleaning. ROI reached in less than 3 months.
Even the toughest mesh requires occasional care. The Shacman H3000 Cooling Net is designed for low maintenance, but following these steps ensures peak performance for years:
Caution: Do not use metal scrapers on the Shacman H3000 Special thickened heat dissipation mesh. The stainless steel is robust but the protective coating may scratch. If the net is heavily clogged with mud, soak with water and then gently rinse.
Will the Shacman H3000 Cooling Net reduce AC cooling efficiency? No. Extensive wind-tunnel tests show less than 1% airflow reduction – negligible for condenser performance, while sand protection increases overall system reliability.
Can I install the Shacman H3000 Cooling Net on older H3000 models (2008-2015)? Yes, the mounting brackets are universal for all H3000 series. The Shacman H3000 Special thickened heat dissipation mesh kit includes adapter spacers if needed.
How does it compare to DIY mosquito nets? DIY nets block airflow and trap dust, causing overheating. The Shacman H3000 Cooling Net uses a specially engineered mesh that self-cleanse vibration and maintains flow.
Is the Shacman H3000 Cooling Net available for other Shacman models? Currently optimized for H3000, but F3000 and X3000 versions are in development. Sign up for updates via the Learn more link.
To meet urgent demand from Sahel region fleets, our Tema and Casablanca warehouses have received 3,200 units of the Shacman H3000 Special thickened heat dissipation mesh. Each unit comes with fitting kit and illustrated manual. Orders dispatched within 24 hours. For dealers and large fleets, volume discounts apply.
Every Shacman H3000 Cooling Net is individually tested for mesh integrity and dimensional accuracy. We ship with commercial invoice and certificate of origin.
In the battle against Sahara sand, the Shacman H3000 Special thickened heat dissipation mesh has proven itself indispensable. Don’t let another evaporator get sand-blasted – retrofit your fleet today with the ultimate armour. Whether you haul across Mauritania, Mali, or Libya, the Shacman H3000 Special thickened heat dissipation mesh ensures your cabin stays cool and your AC system remains intact mile after mile.
