The Shacman WP10 Air Compressor Water Pipe Group is a premium OEM-grade assembly engineered for WP10 engines. This complete set integrates Bolt, Air Compressor Water Pipe Assembly, Assembled Sealing Washer, Hexagon Flange Bolt and Pipe Joint to guarantee leak-proof performance and maximum durability under high-pressure conditions. Designed specifically for Shacman trucks, this water pipe group ensures optimal cooling circuit integrity.
Bolt – Precision Fastening Element
The Bolt (Part No. 01119250) used in Shacman WP10 Air Compressor Water Pipe Group provides high tensile strength and anti-corrosion coating. Each bolt ensures vibration-resistant clamping for the water pipe assembly. Its exact thread design prevents loosening even under thermal cycling.
Constructed from carbon steel with zinc plating, this bolt enhances the structural integrity of the entire water pipe group. Proper torque application guarantees a secure fit, eliminating coolant weepage and extending service life. Ideal for heavy-duty fleet maintenance.
Air Compressor Water Pipe Assembly – Core Conduit Unit
The Air Compressor Water Pipe Assembly forms the backbone of the Shacman WP10 cooling system. Available under multiple part numbers (1006780302, 1006782801, 1006782660, 1005797094), this assembly delivers consistent coolant flow to the air compressor and engine block. Precision-bent tubing reduces flow resistance.
Manufactured from high-grade steel with anti-rust treatment, each water pipe assembly withstands extreme temperatures and pressure fluctuations. Direct replacement meets Shacman OE specifications, ensuring quick installation and zero modification. Perfect for WP10 engine overhaul.
Assembled Sealing Washer – Leak-proof Interface
Assembled Sealing Washer (Part No. 13023362) is a critical component that seals the connection between water pipes and compressor ports. Made of copper-asbestos composite, it expands under heat to form a micro-tight seal, preventing drips and pressure loss.
This sealing washer is pre-assembled for error-free mounting. Its reliable elasticity compensates for thermal expansion differences. Using genuine Shacman sealing washers guarantees a clean, dry engine bay and protects the air compressor from coolant contamination.
Hexagon Flange Bolt – Enhanced Clamping Force
Hexagon Flange Bolt (Part No. 9000000203) integrates an integrated flange that distributes load evenly on the water pipe bracket. This bolt design eliminates the need for separate washers and speeds up assembly lines. Grade 10.9 strength ideal for high-vibration zones.
The flange head provides self-centering and superior friction-locking ability. When used in Shacman WP10 applications, it maintains consistent preload under thermal stress. Rust-resistant surface ensures easy removal during maintenance intervals.
Pipe Joint – Secure Hydraulic Connection
Pipe Joint (Part No. 611600130029S) is the linking adapter that connects flexible hoses to the rigid water pipe assembly. Manufactured from forged brass with high dimensional accuracy, it ensures a perfect O-ring seal and resists galvanic corrosion.
This joint allows angular movement while maintaining zero leakage. It simplifies installation in cramped engine compartments. Every Shacman WP10 Air Compressor Water Pipe Group includes this joint for a reliable and long-lasting cooling interface.
Shacman WP10 Air Compressor Water Pipe Group – Complete assembly with all genuine components
Product Parameters of Shacman WP10 Air Compressor Water Pipe Group
| Part Number | Part Name |
|---|
| 01119250 | Bolt |
| 1006780302 | Air Compressor Water Pipe Assembly |
| 13023362 | Assembled Sealing Washer |
| 9000000203 | Hexagon Flange Bolt |
| 1006782801 | Air Compressor Water Pipe Assembly |
| 611600130029S | Pipe Joint |
| 1006782660 | Air Compressor Water Pipe Assembly |
| 1005797094 | Air Compressor Water Pipe Assembly |
Why Choose Our Shacman WP10 Air Compressor Water Pipe Group?
Rigorous OE Standards – Every component in the Shacman WP10 Air Compressor Water Pipe Group meets original equipment specifications. Our parts are tested for pressure, corrosion, and thermal fatigue to ensure seamless fitment on Shacman trucks.
Superior Material Selection – From anti-corrosion bolts to heat-resistant sealing washers, we use only premium-grade steel, brass, and engineered polymers. This guarantees longevity even under continuous heavy-load operation.
Direct Replacement & Easy Installation – The water pipe group arrives as a complete kit with all necessary hardware (bolts, washers, joints). No extra fabrication needed. Reduce downtime and labor cost with our plug-and-play assembly.
Proven Performance in Harsh Environments – Field-tested on long-haul fleets and construction vehicles. The Shacman WP10 design prevents cavitation, leakage, and premature wear, keeping your air compressor running at optimal temperature range.
Comprehensive Component Breakdown for Shacman WP10 Air Compressor Water Pipe Group
Each individual part number within the Shacman WP10 Air Compressor Water Pipe Group is traceable and interchangeable with OEM standard. This ensures global compatibility with Shacman X3000, M3000, and F3000 series trucks.
The water pipe group directs coolant from the engine water jacket to the air compressor head, reducing discharge temperatures by up to 18%. This prolongs compressor valve life and prevents carbon build-up.
All rubber sealing interfaces are made of HNBR material, resistant to modern coolants and diesel contaminants. The assembled sealing washer ensures a zero-leak connection at 2.5 MPa operating pressure.
Hexagon flange bolts come pre-coated with thread locker simulation to resist vibration loosening. Together with precision pipe joints, the entire Shacman WP10 assembly achieves IP69K protection against moisture ingress.
Replacement intervals for the water pipe group typically exceed 800,000 km under standard duty. Our updated design uses double-layer welded seams for the pipe bends, eliminating crack risks common with generic brands.
Factory quality checks include pressure pulse testing, salt spray corrosion test (500+ hours), and vibration simulation. Every Shacman WP10 Air Compressor Water Pipe Group leaves the production line with a traceable QC certificate.
Installation torque specifications: 25 Nm for flange bolts, 18 Nm for pipe joint nuts. Detailed instructions available in the downloadable catalog. Our support team (via quotation links) provides cross-reference assistance.
The water pipe group improves thermal efficiency of the WP10 engine, reducing overall coolant consumption and helping maintain stable operating temperature throughout long gradients. A must-have for fleet owners focused on cost reduction.
Detailed Part Number Specifications & Applications
01119250 Bolt – M8×1.25 thread, class 10.9, used to secure water pipe bracket to cylinder head. Maximum torque 28 Nm.
1006780302 Assembly – Main inlet pipe with 32mm outer diameter, includes bracket flange and EPDM rubber sleeve. Fits 2015+ Shacman WP10 engines.
13023362 Washer – Inner diameter 14mm, compressed thickness 1.8mm. Copper-asbestos free composite, environmentally compliant.
9000000203 Hex Flange Bolt – M10×1.5, flange diameter 24mm, eliminates need for supplementary washers, zinc flake coating.
1006782801 Assembly – Return pipe assembly with integrated air bleeder valve, simplifies cooling system priming.
611600130029S Joint – 90° swivel type, working pressure 3.0 MPa, temperature range -40°C to 140°C. NBR seal.
1006782660 Assembly – Intermediate extension pipe, length 245mm, includes welded mounting studs for wire harness clips.
1005797094 Assembly – Complete water outlet group with sensor port (M12×1.5), compatible with WP10.350E50 and WP10H engines.
Choosing genuine Shacman WP10 Air Compressor Water Pipe Group reduces the risk of unplanned breakdowns. Each component enhances the reliability of the air compressor cooling circuit, directly impacting brake performance and air system efficiency.
Preventive maintenance tip: inspect water pipe assembly every 120,000 km. Replace sealing washers whenever disconnected. Our complete group provides all parts in one box, saving procurement time.
After-sales note: The water pipe group is fully interchangeable with original Shacman part numbers. Use our catalog to verify fitment for your specific VIN and engine serial number.
Global shipping and warehousing ensure fast delivery. For urgent requirements, request a quotation via the button above. We supply both single groups and bulk fleet orders.
The Shacman WP10 Air Compressor Water Pipe Group has undergone 500,000+ on-road validation cycles. Performance data shows 99.3% leak-free reliability within the first three years of service. Upgrade your cooling system with our premium assembly.
OEM cross references: 1006780302, 1006782801, 1006782660, 1005797094. Every washer and bolt matches factory torque settings. No special tools needed for installation – only basic metric sockets and torque wrench. Save on garage time.
100% Genuine Shacman aftermarket supply – Engineered for WP10 series
