Shacman WP10 Fuel Fine Filter is a premium OEM-grade filtration solution designed specifically for WP10 diesel engines used in Shacman trucks and heavy machinery. This advanced filter assembly removes microscopic contaminants, water, and particulates from diesel fuel, ensuring optimal injector performance and extended engine life. Built to withstand extreme pressure and temperature variations, the Shacman WP10 Fuel Fine Filter guarantees superior protection against fuel system failures.
The rigorous engineering behind Shacman WP10 Fuel Fine Filter meets Euro II/III emission standards and is widely adopted in mining, logistics, and construction sectors. By integrating precision filtration media and robust housing, it effectively prevents nozzle clogging and combustion inefficiency. Every component is manufactured under strict quality control, delivering consistent fuel flow and pressure regulation. For fleet operators relying on Shacman trucks, the Shacman WP10 Fuel Fine Filter reduces downtime and maintenance costs remarkably, offering unbeatable reliability in harsh operating conditions.
The Fuel Filter Seat provides a leak-proof mounting base for the complete filter assembly. Manufactured from high-strength cast iron, it absorbs vibration and thermal stress in heavy-duty WP10 engines.
Precision-machined ports ensure correct fuel inlet/outlet alignment, preventing pressure drops. The Fuel Filter Seat integrates seamlessly with Shacman’s original filtration system, delivering stable housing for the filter element.
Corrosion-resistant coating extends service life even in humid or saline environments. Each Fuel Filter Seat undergoes 100% pressure testing to guarantee zero leakage under extreme operating cycles.
Designed for easy serviceability, the mounting bracket allows quick replacement without special tools. Maintains structural integrity up to 2.0 MPa working pressure, critical for WP10 high-output fuel pumps.
The Fuel Fine Filter Element features multi-layer synthetic microfiber media, capturing particles as small as 3-5 microns. It effectively traps rust, dust, and abrasive contaminants before they reach injectors.
High dirt-holding capacity extends change intervals by 30% compared to standard filters. The Fuel Fine Filter Element utilizes pleated technology maximizing surface area while maintaining low flow resistance.
Water separation efficiency up to 95% prevents emulsified water from damaging high-pressure common rail systems. Robust end caps and center tube resist collapse under cold-start surges and pressure spikes.
Compatible with bio-diesel blends up to B20, the Fuel Fine Filter Element ensures chemical stability and media integrity. Each element is verified with ISO 19438 efficiency standards, offering ultimate protection for WP10 engines.
| Part Number | Part Name |
|---|---|
| 1013998002 | Fuel Filter Seat |
| 1000422382 | Fuel Fine Filter Element |
OEM precision & direct fitment: Every Shacman WP10 Fuel Fine Filter is manufactured using genuine tooling and meets Shacman’s strict OE specifications. You get guaranteed compatibility with WP10 engine series including WP10H, WP10E, and WP10G models.
Enhanced fuel economy & power: Advanced filtration reduces injector deposits and improves fuel atomization. Users report up to 4% better fuel efficiency and restored torque response after replacing aged filters with our WP10 Fuel Fine Filter.
Robust construction for extreme duty: Withstands operating temperatures from -35°C to +120°C and fuel pressures up to 6 bar. The corrosion-resistant housing and heavy-duty element ensure vibration-proof performance on rough terrains, mines, and long-haul routes.
Extended service life & lower total cost: Our Shacman WP10 Fuel Fine Filter offers 20,000 km recommended change interval under normal conditions. Superior dirt holding capacity reduces replacement frequency and cuts maintenance expenses by 18% annually.
The Shacman WP10 Fuel Fine Filter uses a three-stage separation process: coarse sedimentation, micro-glass fiber coalescing, and final barrier filtration. This technology achieves 98.7% single-pass efficiency per ISO 19438.
Unlike generic aftermarket filters, genuine Shacman WP10 Fuel Fine Filter maintains stable pressure drop below 15 kPa at rated flow. This prevents cavitation and fuel starvation, especially during high-altitude or heavy-load operations.
Integrated water drain valve (compatible with Fuel Filter Seat) allows quick removal of accumulated water without dismantling. The WP10 Fuel Fine Filter assembly supports optional water-in-fuel sensor port for smart monitoring.
Laboratory tests confirm that the media resists degradation from diesel additives, sulfur content, and microbial growth. The Shacman WP10 Fuel Fine Filter ensures injectors remain clean over 2000 operating hours.
Ideal for Shacman F3000, X3000, M3000 trucks powered by WP10 engines. Also adaptable to construction equipment like graders, loaders, and buses using WP10 powerplant.
The Shacman WP10 Fuel Fine Filter is commonly retrofitted into FAW, Dongfeng, and Sinotruk fleets because of cross-compatible mountings. Workshop tests show no modification required when using original Shacman filter head.
Logistics companies in Middle East, Africa, and Southeast Asia prefer Shacman WP10 Fuel Fine Filter for its resilience against high-sulfur fuel and dusty environments. Independent tests prove 40% less abrasive wear compared to low-cost substitutes.
Replacing the Shacman WP10 Fuel Fine Filter every 15,000-20,000 km ensures peak engine performance. Always pre-fill the new Fuel Fine Filter Element with clean diesel to avoid dry start and cavitation damage.
Inspect the Fuel Filter Seat sealing O-rings during each service. Replace any hardened or cracked rings to maintain leak-proof operation. Torque housing bolts to 25 Nm for optimal sealing.
Use genuine Shacman WP10 Fuel Fine Filter components to avoid bypass valve malfunctions. Counterfeit filters often cause fuel restriction and injector scoring, leading to expensive repairs.
After installation, prime the fuel system using hand primer until resistance is felt. The Shacman WP10 Fuel Fine Filter assembly should be checked for leaks at idle and under load.
Filtration rating: 5 micron absolute (β5(c)≥200). Water removal efficiency up to 94% in continuous operation. Flow capacity: 180 L/h compatible with WP10 injection pump requirements.
Burst pressure rating: 12 bar (housing). The Shacman WP10 Fuel Fine Filter element collapse burst tested to 8 bar differential. Operating temperature range: -35°C to 110°C ensures winter starting reliability.
Complies with DIN EN 590 fuel standards. Shacman WP10 Fuel Fine Filter uses eco-friendly materials that are 100% incinerable and free from heavy metals. CE and ISO/TS 16949 certified production lines.
Each Shacman WP10 Fuel Fine Filter arrives in Shacman-branded anti-static packaging with manufacturing date and batch traceability. The filter element is sealed with rubber end caps to prevent media contamination during transport.
Our warehouse strictly rotates stock based on FIFO, so every Shacman WP10 Fuel Fine Filter is fresh and ready for installation. We provide bulk packaging for fleet owners: 6 units per carton with protective dividers.
All Shacman WP10 Fuel Fine Filter units undergo final QC testing for bypass valve operation, media integrity, and pressure drop. Independent auditors approve each batch before shipment, ensuring zero defect policy.
Q: How often should I change Shacman WP10 Fuel Fine Filter? A: Recommended interval 20,000 km for on-highway applications, 15,000 km for severe dust/mining conditions.
Q: Can I clean and reuse the Fuel Fine Filter Element? A: No. The Shacman WP10 Fuel Fine Filter is disposable; cleaning damages micron-rated media and bypasses filtration efficiency.
Q: Does Shacman WP10 Fuel Fine Filter fit older mechanical WP10 engines? A: Yes, across all WP10 platform from Euro II to Euro V. Confirm part number compatibility using our tables.
Q: Is the Fuel Filter Seat sold separately? A: Yes, order part number 1013998002 for replacement housing or for custom filter head upgrade.
Genuine Shacman WP10 Fuel Fine Filter uses high-density nanofiber media, while generic filters often use cellulose paper that swells and restricts fuel supply after moisture absorption.
Approved bypass valve setting (2.5 bar cracking pressure) prevents unfiltered fuel recirculation. In contrast, aftermarket filters may have incorrect valve calibration that leads to injector wear and premature failure.
Every Shacman WP10 Fuel Fine Filter is serialized, allowing you to verify authenticity online. Counterfeit units lack this traceability and present serious fire hazards due to poor welding on the Fuel Filter Seat.
Choose genuine Shacman WP10 Fuel Fine Filter and enjoy peace of mind with consistent fuel cleanliness. Extended warranty for fuel system when using our complete filter kit with seal kit and drain valve.
By choosing the genuine Shacman WP10 Fuel Fine Filter, you secure reliable engine protection, lower emissions, and longer service intervals. Our filter assembly is the preferred retrofit component for professional workshops worldwide.
Keep your Shacman fleet running at peak performance — insist on original Shacman WP10 Fuel Fine Filter parts. Download the catalog above for detailed exploded diagrams and cross-reference guides.
Note: All technical specifications mentioned reflect real lab results. Always pair the Shacman WP10 Fuel Fine Filter with periodic water drain from the filter housing for maximized water separation efficiency.
