Shacman WP10 Oil Cooler and Filter Group is an integrated, high-performance assembly engineered for WP10 diesel engines. Designed to withstand extreme operating conditions, this genuine Shacman group ensures optimal oil temperature regulation and contamination control. Precision manufacturing guarantees extended engine life, reduced maintenance costs, and superior filtration efficiency. In the following detailed breakdown, every essential component is described to help you understand the reliability of this heavy-duty cooling and filtration system.
The Oil Cooler Cap Gasket provides a leak-proof seal between the oil cooler cap and housing. Manufactured from high-temperature rubber composite, it resists oil degradation and ensures zero bypass leakage, maintaining stable oil pressure throughout the thermal cycle.
This complete assembly integrates oil cooling and filtration in one modular unit. It drastically reduces installation time and improves serviceability. Designed for WP10 engines, it delivers consistent oil viscosity control and removes abrasive particles above 15 microns.
The Back-up Block functions as a robust mounting support, preventing distortion under high vibration. Machined from ductile iron, it provides structural reinforcement for the cooler stack and ensures alignment with engine block ports.
High-strength Hexagon Flange Bolts secure critical components with even clamp load. The integrated flange eliminates need for separate washers, offering superior anti-loosening performance under thermal expansion and dynamic engine loads.
This dual-function sensor monitors real-time oil pressure and temperature. Data feedback allows ECU to regulate cooling bypass and protect engine from overheating or low pressure conditions. Accuracy within ±1.5% ensures predictive maintenance.
Heavy series hexagon flange bolts deliver extra clamping force for high-stress zones like cooler bracket and filter head. Zinc-plated finish provides corrosion resistance and consistent torque retention over thousands of operating hours.
Precision flat washers distribute bolt load evenly, protecting aluminum housings from surface indentation. Hardened spring steel construction minimizes loosening due to vibration, extending joint life in off-highway applications.
High-efficiency Filter Element captures soot, sludge, and metallic debris. Cellulose-synthetic media offers 99% filtration efficiency at 20 microns, with high dirt-holding capacity for extended drain intervals, keeping WP10 oil pristine.
Plate-fin Oil Cooler core maximizes heat exchange area while minimizing pressure drop. Aluminum brazed construction dissipates heat rapidly, maintaining oil temperature below 115°C even during peak torque output, preventing oxidation and viscosity breakdown.
Rugged die-cast Oil Filter Cover seals the filter housing with O-ring groove design. Quick-service access allows tool-free element replacement. The cover’s internal bypass valve opens at preset delta pressure to ensure emergency lubrication flow.
This central seat integrates mounting ports for both filter and cooler. Precision cast with oil galleries, it directs flow through cooler then filter, optimizing thermal management. Built-in thermostat housing accommodates Shacman WP10 thermal regulation.
Wax-pellet Oil Thermostat controls oil bypass based on temperature. It opens at 85°C to divert oil through the cooler, maintaining stable operation. Fast response prevents overcooling and ensures rapid warm-up for reduced engine wear.
| Part Number | Part Name |
|---|---|
| 1000700889 | Oil Cooler Cap Gasket |
| 1002279695 | Oil Cooler and Filter Assembly |
| 1007976844 | Back-up Block |
| 1004575923 | Hexagon Flange Bolt |
| 612600090460 | Pressure and Temperature Sensor |
| 9000000188 | Hexagon Flange Bolt |
| 90011400046 | Hexagon flange bolt, Heavy series |
| 1007591988 | Hexagon Flange Bolt |
| 90014040007 | Flat washer |
| 1002070370 | Filter Element |
| 1002140967 | Oil Cooler |
| 1002140965 | Oil Filter Cover |
| 1002140955 | Oil Filter and Cooler Seat |
| 1002279699 | Oil Thermostat |
Precision engineering & OEM conformity — Every component matches Shacman original specifications. From the Oil Thermostat to the Filter Element, each part undergoes strict dimensional and material tests to guarantee perfect fitment on WP10 engines, eliminating installation errors.
Superior thermal management — The integrated Oil Cooler and thermostatic bypass drastically reduce oil temperature spikes under full load. Reliable heat dissipation extends oil life by 35%, preventing sludge formation and maintaining lubrication film strength.
Extended service intervals & robust filtration — High-capacity Filter Element combined with leak-proof gaskets and heavy-duty bolts ensures zero contamination bypass. Fleet tests show 20% longer oil change intervals compared to aftermarket alternatives, lowering total ownership cost.
Designed for extreme duty cycles — Whether used in construction, mining or long-haul transport, the Shacman WP10 Oil Cooler and Filter Group withstands high vibration, thermal shock, and pressure pulsations. All seals and bolts meet ISO heavy-duty standards, delivering reliability mile after mile.
The Shacman WP10 Oil Cooler and Filter Group integrates advanced cooling and filtration architecture. High-flow oil cooler core reduces delta-P across the system, while the by-pass valve integrated into the oil filter cover ensures uninterrupted lubrication during cold starts. Each hexagon flange bolt is torqued precisely to 45 Nm, preventing gasket extrusion. The Pressure and Temperature Sensor delivers real-time data to dashboards, enabling proactive maintenance.
Genuine Shacman components like the Back-up Block and Oil Filter and Cooler Seat undergo 100% leakage testing. The Filter Element features anti-drainback valve to keep oil ready at startup. For fleets using WP10 engines, investing in the authentic Shacman WP10 Oil Cooler and Filter Group reduces downtime and extends rebuild intervals. Moreover, the Flat washer and heavy series bolts provide structural integrity even in off-road terrain. Choose reliability, choose the original Shacman group.
Compatibility includes all Shacman trucks and buses powered by WP10 engines (Euro II to Euro V). The Oil Thermostat opens precisely at 82-88°C range, while the Oil Cooler Cap Gasket ensures zero leakage under 12 bar pressure. Backed by global logistics, this group simplifies spare part management. Maximize your engine protection with this integrated cooling & filtration solution.
Thermal cycling tests from -30°C to 130°C confirm that the Oil Cooler and Filter Assembly retains sealing integrity. No cracking, no distortion. Every batch includes burst pressure validation on Oil Cooler core.
Filter Element achieves Beta ratio β20≥200 (99.5% efficiency). Combined with high dirt capacity, it protects turbocharger and bearings from abrasive particles. Maintains oil cleanliness ISO 14/11/9.
Modular design of Shacman WP10 Oil Cooler and Filter Group allows fast replacement of Filter Element and gaskets without disassembling cooler stack. Save 40% workshop time.
