Poly V-Belt
Поликлиновой ремень
Correa Poli V
The Shacman Poly V-Belt with OEM number BY612600061361 represents superior engineering in drive belt technology for commercial vehicles. This multi-ribbed belt ensures optimal power transmission between engine components and auxiliary systems. The BY612600061361 component is specifically designed to withstand the rigorous demands of heavy-duty truck operations. Its advanced construction provides reliable performance under various temperature conditions and load requirements. This genuine Shacman part offers perfect compatibility with multiple engine configurations in the manufacturer’s vehicle lineup. The Poly V-Belt plays a crucial role in driving essential components like alternators, water pumps, and air conditioning compressors. Regular maintenance with authentic BY612600061361 components prevents belt failures and ensures uninterrupted vehicle operation. The product features advanced rubber compounds and reinforcement materials for extended service life and durability.
| Parameter | Specification |
|---|---|
| OEM Number | BY612600061361 |
| Brand | Shacman |
| Product Name | Poly V-Belt |
| Compatible Models | Shacman F3000, X3000, M3000 Series |
| Belt Type | Multi-Ribbed (Poly V) |
| Number of Ribs | 6 PK |
| Length | 1125 mm |
| Width | 19 mm |
| Operating Temperature | -40°C to 100°C |
| Material Composition | Neoprene Rubber with Polyester Cords |
The Shacman Poly V-Belt BY612600061361 incorporates multiple advanced features for superior drive system performance. Its multi-ribbed design provides increased surface contact with pulleys for enhanced power transmission. The belt utilizes high-strength polyester tension members for minimal stretch and consistent performance. This design prevents slippage and maintains proper tension under varying load conditions. The components feature advanced rubber compounds resistant to heat, oil, and environmental degradation. The belt includes precision-molded ribs for smooth operation and reduced vibration. These features collectively enhance drive system efficiency and extend the product’s operational lifespan in demanding truck applications.
This Poly V-Belt provides exceptional power transmission capabilities for auxiliary engine systems. The multiple rib design distributes load evenly across the belt width, reducing stress concentrations. The optimized groove engagement ensures maximum contact with pulley surfaces for efficient power transfer. The low-stretch characteristics maintain consistent performance throughout the belt’s service life. These design features ensure reliable operation of critical engine components and prevent power transmission failures in commercial vehicles.
The BY612600061361 belt features comprehensive resistance properties for extended service life. The neoprene rubber compound provides excellent resistance to heat aging and ozone degradation. The reinforced construction withstands exposure to engine oils, coolants, and other automotive fluids. The polyester cord reinforcement maintains dimensional stability under varying temperature conditions. These durability features ensure consistent performance in harsh operating environments and challenging weather conditions encountered in commercial transportation.
Implementing the Shacman Poly V-Belt BY612600061361 provides significant operational benefits for truck owners and fleet operators. The belt ensures reliable power transmission to essential engine accessories and auxiliary systems. It reduces the risk of belt failures that can cause vehicle breakdowns and costly downtime. The component contributes to improved fuel efficiency through reduced slippage and optimal accessory drive performance. The durable construction minimizes replacement frequency and maintenance requirements over time. These benefits translate to enhanced operational efficiency and reduced operating costs for commercial transportation businesses.
The BY612600061361 Poly V-Belt significantly enhances accessory drive system reliability and consistency. It maintains proper tension and grip under varying engine speeds and load conditions. The multi-rib design provides redundancy in case of minor rib damage, preventing complete failure. The thermal stability ensures consistent performance in extreme temperature conditions. These reliability features ensure continuous operation of critical systems like cooling, charging, and climate control in commercial vehicles.
Performance efficiency represents a major benefit of this genuine Shacman Poly V-Belt. The low friction design reduces power loss in the accessory drive system. The precise dimensional stability maintains optimal belt tension without frequent adjustments. The durable construction resists wear and maintains performance throughout its service life. These efficiency improvements result in reduced fuel consumption, lower maintenance costs, and improved vehicle availability for transportation operations.
The Shacman Poly V-Belt BY612600061361 serves diverse applications across the Shacman commercial vehicle lineup. It is essential for long-haul transportation trucks operating in various climate zones and terrain conditions. The belt performs reliably in construction vehicles requiring robust accessory drive systems for heavy-duty operations. It suits municipal vehicles including garbage trucks, utility vehicles, and public service vehicles. The component works effectively in mining and quarry operations with extreme environmental challenges and dust exposure. It maintains performance in cold climate operations where flexible materials must withstand temperature extremes. These applications demonstrate the product’s versatility across different transportation segments and operating requirements.
In heavy-duty commercial applications, the BY612600061361 ensures reliable accessory drive system operation under demanding conditions. It provides consistent power transmission for multiple engine accessories in transportation trucks. The belt maintains performance during continuous operation in delivery and distribution services. It withstands vibration and shock loads encountered in rough terrain and construction environments. The component performs reliably in extreme temperature conditions from desert heat to arctic cold. These capabilities make it indispensable for professional transportation and commercial vehicle operations requiring dependable accessory drive systems.
Specialized industrial vehicles benefit significantly from this advanced Poly V-Belt technology. Mining operations use it for reliable accessory drive in dusty and high-vibration environments. The belt performs in agricultural equipment requiring dependable power transmission for various implements. It serves construction machinery needing robust drive systems for hydraulic pumps and other accessories. The component works in generator sets and stationary power applications requiring reliable accessory drive. These applications highlight the product’s engineering robustness and adaptability to demanding industrial environments and operating conditions.
Proper installation of the Shacman Poly V-Belt BY612600061361 ensures optimal performance, reliability, and service life. The process requires appropriate tools, equipment, and understanding of vehicle accessory drive systems. Installation should occur with the engine cool and ignition system disabled to prevent accidental starting. The pulley surfaces must be clean, undamaged, and free from oil, grease, or debris. All tensioner mechanisms should be inspected and properly adjusted according to manufacturer specifications. The installation process typically takes 20-30 minutes for qualified technicians with relevant experience. Post-installation verification includes visual inspection, tension check, and operational testing of all driven accessories.
The installation process begins with comprehensive vehicle preparation and implementation of safety procedures. Position the vehicle on level ground and engage parking brakes to prevent movement during installation. Locate and carefully release the belt tensioner mechanism to relieve tension on the existing belt. Remove the old belt by routing it around pulleys and clear of all obstruction points. Clean all pulley grooves thoroughly to ensure proper belt seating and contact surfaces. Route the new BY612600061361 belt according to the vehicle’s specific routing diagram. Apply tension using the tensioner mechanism and verify proper belt seating in all pulley grooves. Perform visual inspection and operational testing of all accessories driven by the belt system. This comprehensive procedure ensures correct installation and reliable long-term performance.
Several critical precautions ensure safe and effective belt installation and subsequent operation. Always disconnect the vehicle battery before beginning any engine compartment work to prevent accidental starting. Use proper tools and equipment when working with tensioner mechanisms to prevent injuries. Wear appropriate personal protective equipment including safety glasses and gloves during installation. Verify correct belt routing according to manufacturer diagrams before applying tension. Use proper tension measurement tools to achieve specified tension values for optimal performance. These comprehensive precautions prevent installation errors and ensure long-term operational safety and reliability.
Regular maintenance ensures continuous optimal performance of the BY612600061361 Poly V-Belt throughout its service life. Visual inspection should occur during scheduled service intervals and during routine vehicle maintenance. Check for signs of wear, cracking, glazing, or contamination on all belt surfaces and ribs. Tension verification ensures proper belt tightness and prevents slippage or excessive wear. Alignment checking confirms proper pulley alignment to prevent edge wear and premature failure. Maintenance documentation should record all inspection activities, measurements, and corrective actions taken. These comprehensive protocols help identify potential issues before they affect belt performance and vehicle operation.
Comprehensive inspection procedures ensure belt reliability, safety, and continuous optimal performance. Begin with visual examination of all belt surfaces for visible damage, cracking, or wear patterns. Check rib condition for signs of wear, chunking, or separation from the belt body. Verify proper belt tension using appropriate tension measurement tools and techniques. Inspect pulley alignment and condition for signs of wear, damage, or misalignment. Check for proper belt seating in all pulley grooves and absence of tracking issues. These detailed procedures help maintain optimal performance and safety throughout the product service life.
A structured maintenance schedule optimizes belt performance, longevity, and operational reliability. Visual inspection should occur every 10,000 kilometers or during regular service intervals. Tension verification and adjustment is recommended every 20,000 kilometers or quarterly. Complete system inspection including pulley alignment should happen every 40,000 kilometers or semi-annually. Belt replacement should be considered every 100,000 kilometers or when inspection reveals significant wear. These maintenance activities prevent unexpected failures, ensure continuous operational safety, and extend product service life.
The Shacman Poly V-Belt BY612600061361 meets rigorous technical performance standards and quality requirements for commercial vehicles. Its mechanical and material performance exceeds industry standards for heavy-duty accessory drive applications. The belt maintains operational reliability and consistent performance across specified temperature ranges. It withstands environmental challenges, chemical exposure, and mechanical stresses encountered in commercial transportation. The components maintain dimensional stability, flexibility, and functional performance under maximum load conditions. These comprehensive specifications ensure reliable performance in demanding operating environments and challenging conditions typical of commercial truck operations.
The belt’s mechanical characteristics ensure reliable operation under various speed conditions and load demands. The high-strength tensile members provide minimal stretch under maximum load conditions. The optimized rib profile ensures proper pulley engagement and efficient power transmission. The flexible construction maintains performance across the entire operating temperature range. These mechanical properties guarantee dependable accessory drive performance, reduced maintenance requirements, and extended service life in commercial vehicle applications.
Environmental durability specifications ensure extended service life and reliable performance in harsh operating conditions. The belt operates effectively in temperature extremes from freezing cold to desert heat conditions. All materials resist degradation from ozone, UV exposure, and environmental contaminants. The construction withstands exposure to automotive fluids, road chemicals, and cleaning agents. The design maintains flexibility and performance in high-humidity and variable weather conditions. These environmental capabilities ensure reliable operation, consistent performance, and long service life in diverse geographic regions and climate conditions.
The Shacman Poly V-Belt BY612600061361 undergoes comprehensive quality assurance procedures and verification processes throughout manufacturing. Production processes adhere to IATF 16949 quality management system requirements and automotive industry standards. Each production batch undergoes dimensional verification, material testing, and performance validation before shipment. Statistical process control methods ensure consistent manufacturing quality levels, dimensional accuracy, and performance reliability. The belt meets international safety standards, regulatory requirements, and industry specifications for commercial vehicle components. It carries appropriate automotive certifications, quality markings, and compliance documentation for global market distribution. These quality measures guarantee product reliability, performance consistency, and customer satisfaction across all market applications.
Rigorous testing validates belt performance characteristics, durability features, and operational reliability under various conditions. Environmental testing includes thermal cycling, ozone resistance, UV exposure, and chemical resistance evaluations. Mechanical testing covers tensile strength, elongation characteristics, fatigue life, and wear resistance assessment. Performance testing includes slip resistance, power transmission efficiency, and noise level measurements. Life cycle testing simulates extended operation under realistic vehicle conditions and usage patterns. Vehicle validation testing ensures complete compatibility, proper function, and reliable performance with Shacman engine accessory systems. These comprehensive testing protocols confirm the product meets all design specifications, performance requirements, and customer expectations.
The BY612600061361 Poly V-Belt includes comprehensive warranty coverage, customer protection, and support services from Shacman. Technical support, troubleshooting assistance, and operational guidance are available through authorized dealer and service networks worldwide. Complete documentation includes detailed installation guides, maintenance manuals, tension specifications, and troubleshooting procedures. Replacement parts availability, inventory management, and supply chain support ensure minimal vehicle downtime during maintenance or repairs. Technical training resources, educational materials, and service bulletins assist proper installation and maintenance procedures. Online technical resources, digital platforms, and customer service portals provide additional support information for technicians and operators. These comprehensive support services enhance customer satisfaction, ensure optimal product performance, and build long-term customer relationships.
The Shacman Poly V-Belt BY612600061361 represents premium engineering, advanced design, and superior quality in accessory drive systems for commercial vehicles. Its robust construction, high-performance materials, and precision engineering ensure reliable power transmission under demanding transportation conditions. The multi-ribbed belt design provides efficient operation, consistent performance, and extended service life for Shacman engine accessory systems. Proper installation, regular maintenance, and correct operational procedures maximize product performance, reliability, and longevity. This genuine Shacman component offers perfect compatibility, optimal function, and seamless integration with specified vehicle models and engine configurations. It contributes to improved operational reliability, reduced maintenance costs, enhanced accessory performance, and vehicle availability. Fleet operators, transportation companies, and individual owners benefit from consistent performance, superior quality, and enhanced operational efficiency. Always choose genuine Shacman parts for optimal vehicle performance, regulatory compliance, and operational excellence in commercial transportation services.
