Pulling Rivet
Тяговая Заклёпка
Remache de Tracción
OEM Pulling Rivet 610800010023 specifically manufactured for the Shacman X5000 heavy truck. This high‑strength 610800010023 fastener is essential for securing body panels, chassis brackets, and interior trim components with lasting reliability.
The Pulling Rivet 610800010023 features a precision‑engineered mandrel and sleeve combination that creates a vibration‑resistant joint. It is designed for single‑sided installation, making it ideal for areas with limited access on the vehicle assembly line.
Using the authentic 610800010023 rivet guarantees correct clamp force and corrosion protection, preventing loose panels and potential safety issues during long‑haul operations.
| Parameter | Specification |
|---|---|
| OEM Part Number | 610800010023 |
| Product Name | Pulling Rivet |
| Brand / Model | Shacman X5000 |
| Material | Carbon Steel with Zinc‑Nickel Plating |
| Rivet Diameter | 6.4 mm (1/4 inch) |
| Grip Range | 4.8 mm – 9.5 mm |
| Head Style | Dome Head |
| Shear Strength | ≥ 8.5 kN |
| Tensile Strength | ≥ 12.4 kN |
| Application | Shacman X5000 cab, chassis, and trim fastening |
The 610800010023 pulling rivet may be small in size, but its role in vehicle integrity is enormous. It secures exterior body panels that must withstand aerodynamic forces at highway speeds and interior components that face constant vibration from diesel engine operation.
Unlike standard hardware store rivets, the Pulling Rivet 610800010023 is manufactured to Shacman’s strict material specifications. The zinc‑nickel plating provides over 500 hours of salt spray resistance, making it suitable for trucks operating in coastal or winter road conditions.
The mandrel of the 610800010023 is designed to break flush with the rivet head after installation, leaving no sharp protrusions. This is a key safety feature that prevents injuries to assembly workers and protects wiring harnesses from abrasion.
The expanding sleeve creates a large blind‑side footprint, distributing clamp load over a wider area. This prevents the rivet from pulling through thin sheet metal, a common failure mode with inferior fasteners used in high‑stress applications like door hinges and hood latches.
The Pulling Rivet 610800010023 is compatible with standard pneumatic or manual rivet tools. Its consistent mandrel break load ensures that every rivet is set to the same clamp force, eliminating the guesswork associated with torque‑based threaded fasteners.
For repair shops, keeping a stock of genuine 610800010023 rivets means that collision damage repairs can be completed to factory standards. Using the correct OEM fastener maintains the vehicle’s structural crashworthiness and corrosion warranty.
Each batch of 610800010023 rivets undergoes hardness testing and dimensional inspection. The steel wire used for the mandrel is sourced from approved mills and is tested for tensile strength before the cold‑heading process begins.
The plating thickness is verified using X‑ray fluorescence technology, ensuring that the zinc‑nickel layer meets the minimum 8‑micron requirement. This level of scrutiny is what separates genuine Shacman parts from unbranded alternatives.
The 610800010023 rivet is used extensively in the Shacman X5000 cab structure. It secures the roof panel to the side frames, attaches the firewall insulation, and fastens the interior dashboard support brackets.
On the chassis side, these rivets are found in the mounting brackets for air tanks, battery boxes, and mudguard supports. Their resistance to shear loads makes them ideal for these dynamic applications where welded joints might crack over time.
The Pulling Rivet 610800010023 is specific to the X5000 platform. It may appear similar to rivets used on older Shacman models, but the grip range and material grade are optimized for the X5000’s cab design.
Using a rivet with incorrect grip range can result in a loose joint that rattles or a rivet that fails to set properly. Always reference the part number 610800010023 when ordering to guarantee correct fitment.
Counterfeit fasteners are a hidden danger in the aftermarket. We supply only authentic Shacman X5000 Pulling Rivet 610800010023 units sourced directly from the manufacturer’s authorized distribution chain.
These rivets are packaged in sealed boxes with batch numbers for traceability. For large‑volume body repair facilities, we offer bulk packaging options that maintain part integrity while reducing waste.
When you choose the genuine 610800010023, you are investing in the same quality that rolled off the Shacman production line. Do not compromise your repair standards with unknown substitutes.
Standard box of 50 pieces. Bulk packs available for high‑volume body shops. Each rivet individually inspected before packaging.
Technical guidance on proper rivet tool selection and joint preparation. We help ensure your 610800010023 rivets are set correctly.
For current stock levels and volume pricing on the genuine Pulling Rivet 610800010023, please use the contact options above.
