Harness Bracket
Кронштейн Жгута
Soporte de Arnés
OEM Harness Bracket 611600080108 precision‑engineered for the Shacman X5000 heavy‑duty truck platform. This durable 611600080108 component provides secure anchoring for electrical wiring harnesses, maintaining proper routing and protecting against vibration‑induced damage.
Fabricated from high‑strength steel with advanced corrosion protection, the Harness Bracket 611600080108 withstands the demanding environmental conditions of commercial vehicle operation across diverse climates and road surfaces.
Installing the genuine 611600080108 bracket restores factory‑spec harness support and prevents the electrical system issues caused by loose or improperly secured wiring bundles.
| Parameter | Specification |
|---|---|
| OEM Part Number | 611600080108 |
| Product Name | Harness Bracket |
| Brand / Model | Shacman X5000 |
| Material | Cold‑Rolled Steel with Black Electrophoretic Coating |
| Bracket Length | 135.00 mm |
| Bracket Width | 40.00 mm |
| Mounting Hole Diameter | 10.50 mm (single bolt location) |
| Harness Retention Feature | Curved saddle with integrated tie‑wrap channel |
| Coating Thickness | 25‑35 microns uniform coverage |
| Application | Shacman X5000 chassis and engine bay harness routing |
The 611600080108 harness bracket serves as a critical attachment point that fixes the position of electrical wiring bundles along their intended path through the Shacman X5000 engine compartment and chassis framework.
Modern heavy trucks contain kilometers of wiring that transmit signals for engine management, safety systems, lighting, and telematics. Each harness must be supported at regular intervals to prevent sagging and movement.
The Harness Bracket 611600080108 provides strain relief that protects multi‑pin connectors from the pulling forces that occur as the chassis flexes and the engine moves on its mounts during normal vehicle operation.
The 611600080108 bracket receives a black electrophoretic coating applied through an immersion process that ensures complete coverage of all surfaces, including internal corners and edges that are difficult to protect with spray coatings.
This e‑coat layer provides excellent adhesion and chip resistance, protecting the underlying steel from moisture and road salt. The uniform 25‑micron thickness delivers consistent corrosion protection across the entire bracket surface.
The 611600080108 bracket attaches to the vehicle structure using a single bolt through its precision‑punched mounting hole. The hole diameter accommodates an M10 fastener with a captive washer for secure retention.
The harness bundle rests in the curved saddle of the bracket and is retained by a heavy‑duty cable tie threaded through the integrated channel. This design allows quick installation and removal during service operations.
Each production batch of 611600080108 brackets undergoes coating thickness measurement using eddy current testing equipment. Adhesion is verified through cross‑hatch testing according to ISO 2409 standards.
Cyclic corrosion testing that alternates between salt spray, humidity, and drying cycles simulates years of real‑world exposure in a compressed timeframe. The brackets must show no base metal corrosion after 60 cycles.
A broken or detached 611600080108 bracket allows the harness to move freely within the engine bay. This movement can bring wiring into contact with the exhaust manifold, turbocharger, or rotating driveshaft components.
Wiring that sags onto hot surfaces melts through its insulation, creating short circuits that can disable critical engine sensors or blow fuses. In severe cases, an electrical fire can result from unprotected wiring contacting exhaust components.
During preventive maintenance inspections, technicians should verify that all harness brackets are present and securely fastened. Replacing a missing Harness Bracket 611600080108 is a simple repair that prevents costly electrical damage.
The 611600080108 bracket is designed for a specific harness routing position on the Shacman X5000 platform. Its formed profile matches the contour and diameter of the designated wiring bundle at that location.
Fleet workshops should stock a selection of genuine 611600080108 brackets as part of their electrical system repair inventory. Quick replacement of damaged brackets maintains wiring integrity and prevents progressive damage.
Non‑genuine brackets may use thinner material or inferior coatings that fail prematurely. We supply only the authentic Shacman X5000 Harness Bracket 611600080108 manufactured to stringent OEM quality standards.
Each bracket is individually packaged with protective wrapping to prevent coating damage during handling and transportation. The part number 611600080108 is clearly printed on the label for easy identification.
Our extensive distribution network ensures that genuine 611600080108 harness brackets are available for immediate dispatch to workshops, dealerships, and fleet maintenance facilities across all major continents.
Single harness bracket with e‑coat finish. Mounting hardware available separately. Protective packaging preserves coating integrity during transit.
Expert guidance on bracket placement and harness securing techniques. We help ensure your 611600080108 brackets provide long‑term wiring protection.
For current stock availability and technical specifications on the genuine Harness Bracket 611600080108, please use the contact buttons above.
