Water Intake Bracket
Кронштейн Водозабора
Soporte de Admisión
OEM Water Intake Bracket DZ97259538141 precision‑formed for the Shacman X5000 cooling system. This robust DZ97259538141 mounting component secures the water intake pipe to the engine, maintaining proper alignment and preventing hose stress.
Fabricated from high‑strength steel with durable anti‑corrosion coating, the Water Intake Bracket DZ97259538141 withstands engine vibration, thermal cycling, and the mechanical loads transmitted through the cooling system plumbing.
Replacing a cracked or loose bracket with the genuine DZ97259538141 component restores proper pipe support and prevents the coolant leaks caused by stressed hose connections.
| Parameter | Specification |
|---|---|
| OEM Part Number | DZ97259538141 |
| Product Name | Water Intake Bracket |
| Brand / Model | Shacman X5000 |
| Material | High‑Strength Steel with Zinc‑Nickel Electroplating |
| Bracket Type | Formed steel support arm with reinforcement rib |
| Mounting Hole Diameter | 10.00 mm (engine block bolt point) |
| Pipe Support Diameter | 50.00 mm cradle with rubber isolator |
| Overall Length | Approximately 145.00 mm |
| Corrosion Protection | Zinc‑Nickel plating, 480 hours salt spray rated |
| Application | Shacman X5000 water intake pipe engine mounting |
The DZ97259538141 water intake bracket secures the coolant inlet pipe to the Shacman X5000 engine block, maintaining proper alignment and preventing relative movement between the rigid pipe and flexible hoses.
Without secure bracketing, the water intake pipe would vibrate with engine operation, transmitting stress to hose connections and the radiator inlet. This leads to fatigue cracking at clamped joints.
The Water Intake Bracket DZ97259538141 features a rubber isolator in its pipe cradle that dampens vibration while allowing for thermal expansion of the pipe during engine warm‑up and cool‑down cycles.
The DZ97259538141 bracket is formed from high‑strength steel with a reinforcement rib that provides rigidity while minimizing weight. The zinc‑nickel plating offers superior corrosion resistance.
The rubber isolator in the pipe cradle is made from heat‑resistant EPDM that maintains its flexibility and damping properties through continuous exposure to engine compartment temperatures.
The DZ97259538141 bracket bolts to a threaded boss on the engine block. The bolt must be tightened to the specified torque using a calibrated torque wrench to prevent loosening or thread damage.
The water pipe should rest fully in the rubber‑lined cradle before the retaining clamp is secured. Any preload on the pipe indicates misalignment that should be corrected before final tightening.
Each production batch of DZ97259538141 brackets undergoes dimensional inspection to verify hole positions and cradle diameter. The bracket must match the engine block and pipe dimensions exactly.
Plating thickness is verified using X‑ray fluorescence to ensure the zinc‑nickel layer meets the minimum specification for long‑term corrosion protection in the engine compartment environment.
Coolant residue around the pipe connection near the DZ97259538141 bracket may indicate that a loose bracket has allowed the pipe to move, compromising the hose seal at the clamped joint.
Cracks visible at the reinforcement rib or mounting hole are evidence of fatigue. A cracked bracket must be replaced immediately to prevent pipe detachment and sudden coolant loss.
During cooling system service, the bracket and rubber isolator should be inspected for condition. A hardened or cracked isolator loses its damping ability and should be replaced along with the bracket.
The DZ97259538141 bracket is specifically configured for the Shacman X5000 water intake pipe routing. Its mounting hole and cradle dimensions match the factory installation exactly.
Fleet operators should maintain spare brackets and isolators for replacement during cooling system repairs. Prompt bracket replacement prevents the progressive damage caused by unsupported pipes.
Aftermarket brackets with incorrect dimensions can misalign the intake pipe and cause leaks. We supply only the authentic Shacman X5000 Water Intake Bracket DZ97259538141 built to OEM specifications.
Each bracket is individually packaged with protective wrapping. The part number DZ97259538141 is clearly displayed on both the component label and packaging for immediate identification.
Our international supply chain ensures that genuine DZ97259538141 brackets are available for immediate dispatch to dealerships and fleet facilities worldwide.
Single water intake bracket with rubber isolator and mounting bolt. Ready for installation onto the engine block.
Expert guidance on bracket installation and cooling system pipe alignment. We help ensure your DZ97259538141 bracket provides secure long‑term pipe support.
For current stock availability on the genuine Water Intake Bracket DZ97259538141, please use the contact buttons above.
