Flywheel Housing
Картер Маховика
Carcasa del Volante de Inercia
This OEM flywheel housing (part 1000295905) is a precision-engineered engine structural enclosure component designed specifically for Shacman heavy-duty commercial truck diesel engines. The 1000295905 flywheel housing encloses the flywheel and provides the mounting interface for the transmission, ensuring proper powertrain alignment under all operating conditions.
Manufactured from high-quality materials with precision machining, exact dimensional tolerances, and durable surface treatment, this 1000295905 flywheel housing withstands extreme torsional loads, high mechanical stress, continuous vibration, and prolonged operation during demanding heavy-duty commercial vehicle applications.
Replacing a cracked, warped, or damaged flywheel housing with this genuine 1000295905 component restores proper transmission alignment and prevents powertrain failure. The OEM number guarantees exact dimensional specifications and factory-engineered quality for Shacman engine platforms.
| Parameter | Specification |
|---|---|
| OEM Part Number | 1000295905 |
| Product Name | Flywheel Housing |
| Brand | Shacman |
| Position | Engine Rear – Flywheel Enclosure and Transmission Mounting Interface |
| Material | High-Strength Cast Iron with Precision Machining |
| Manufacturing Process | Precision Casting, CNC Machining, Boring, Surface Treatment, Quality Inspection |
| Surface Protection | Corrosion-Resistant Coating with Durable Finish |
| Function | Protective Enclosure for Flywheel and Precision Mounting Interface for Transmission |
The 1000295905 flywheel housing serves as a vital structural enclosure component engineered to house the flywheel and provide the precision mounting interface for the transmission within Shacman heavy-duty diesel powertrain systems.
This 1000295905 flywheel housing bolts to the rear of the engine block, enclosing the flywheel assembly while providing a rigid connection point that aligns the transmission input shaft with the engine crankshaft centerline.
The precision-machined transmission mounting face of the 1000295905 ensures accurate alignment between the engine and transmission, preventing misalignment that could cause clutch wear and transmission input shaft damage.
This 1000295905 component provides access ports for the starter motor and timing inspection, allowing service technicians to perform engine timing verification and starter motor installation without housing removal.
The high-strength cast iron construction provides exceptional structural rigidity and vibration damping, maintaining precise transmission alignment while absorbing powertrain stresses throughout extended service intervals.
The 1000295905 flywheel housing is engineered to meet the specific bolt pattern, housing depth, and mounting configuration requirements of Shacman engine and transmission interfaces, assuring seamless compatibility.
By providing dependable flywheel enclosure and transmission mounting, this housing contributes directly to proper powertrain alignment, clutch operation, and maintained vehicle performance in demanding operational environments.
The 1000295905 flywheel housing is manufactured from premium high-strength cast iron with precision CNC machining, delivering exceptional dimensional accuracy and consistent mounting face flatness for reliable transmission alignment.
The precisely controlled transmission mounting bore concentricity of the 1000295905 ensures accurate alignment between the crankshaft and transmission input shaft, preventing clutch hub runout and premature spline wear.
The carefully designed structural ribbing of the 1000295905 provides maximum rigidity for transmission support while minimizing weight, maintaining dimensional stability under the combined loads of engine torque and vehicle dynamics.
Each flywheel housing undergoes rigorous quality verification, including dimensional inspection, mounting face flatness measurement, and material integrity testing to guarantee its performance in demanding powertrain applications.
The material selection for the 1000295905 prioritizes both structural strength for transmission support and vibration damping characteristics for reducing transmitted dynamic stress to the transmission assembly.
The 1000295905 flywheel housing’s design has been validated through extensive vehicle durability testing to ensure reliable powertrain interface throughout the complete service interval.
Replacement of the 1000295905 flywheel housing requires removing the transmission, clutch assembly, and flywheel, unbolting the old housing from the engine block, and installing the new housing with proper alignment and bolt torque.
After installation of the 1000295905 flywheel housing, verify that the housing is properly seated on the engine block, all bolts are torqued to specification in the correct sequence, and check for proper transmission alignment.
Periodic inspection of the 1000295905 flywheel housing for cracks, bolt loosening, oil leaks, or corrosion is recommended within routine powertrain maintenance and inspection schedules.
When installing the 1000295905 flywheel housing, ensure that the engine block mating surface is clean and that the housing is properly aligned using guide pins before tightening bolts to prevent stress-induced cracking.
It is critical to use the correct grade and length of mounting bolts with the 1000295905 flywheel housing, and to apply the specified torque values to prevent bolt loosening from powertrain vibration during operation.
During routine service, pay close attention to the flywheel housing area of the 1000295905 for signs of oil seepage at the gasket interface, bolt area cracking, or transmission mounting face damage indicating the need for housing replacement.
Each 1000295905 flywheel housing undergoes thorough dimensional inspection, mounting face flatness verification, and material integrity testing to guarantee strict compliance with OEM engineering specifications.
We provide complete quality documentation for every 1000295905 flywheel housing, including material certifications and inspection reports for engine service records and workshop quality assurance compliance.
The flywheel housing is tested for dimensional accuracy and structural integrity to ensure proper fitment and reliable transmission interface in the most demanding vehicle operating environments.
Our quality management system includes fatigue strength testing and corrosion resistance verification on the 1000295905 to guarantee consistent manufacturing quality and extended service durability.
We maintain complete traceability of all materials used in the 1000295905 flywheel housing, from raw material certification to finished component inspection, ensuring total accountability throughout the production process.
Visible cracks, fractures, or permanent deformation of the 1000295905 flywheel housing indicates structural failure, requiring immediate replacement to prevent transmission misalignment and powertrain damage.
Oil leakage, seepage, or staining at the 1000295905 housing-to-block gasket interface indicates sealing failure, necessitating prompt housing replacement and gasket renewal during engine service operations.
If the flywheel housing exhibits bolt hole elongation, thread damage, or mounting face fretting, the 1000295905 component should be replaced immediately to restore proper transmission alignment and prevent bolt loosening.
Following any transmission failure, clutch explosion, or vehicle collision affecting the powertrain, the 1000295905 flywheel housing must be inspected and replaced if any cracks or distortion are detected.
If the housing shows signs of starter motor mounting damage, thread stripping, or timing access cover sealing issues, the 1000295905 requires replacement to ensure proper accessory mounting and system integrity.
Standard powertrain inspections should include a detailed evaluation of the 1000295905 flywheel housing for early indicators of cracking, gasket leakage, or mounting bolt loosening requiring corrective action.
Inferior aftermarket flywheel housings with incorrect specifications or substandard materials can lead to transmission misalignment and powertrain failure. We exclusively supply authentic components like the 1000295905 manufactured to precise OEM engineering standards.
The part number 1000295905 is clearly identified on the packaging for unambiguous verification. Our extensive international logistics infrastructure ensures secure protective packaging and rapid dispatch to any worldwide destination with complete export documentation.
All procurements of 1000295905 include comprehensive quality certification, ensuring conformity with local import regulations and engine powertrain service documentation requirements in your jurisdiction.
We provide highly competitive pricing structures and dependable shipping alternatives for the 1000295905 flywheel housing, facilitating convenient access for our international clientele to maintain their Shacman engines with authentic OEM structural components.
Our dedicated client support team stands prepared to address any technical inquiries or logistical concerns regarding the 1000295905 flywheel housing, encompassing engine powertrain consultations to comprehensive bulk fleet procurement processing.
Complete 1000295905 flywheel housing. Ready for professional installation featuring precision-machined transmission mounting face, proper bolt hole pattern, and corrosion-resistant coating for dependable powertrain interface performance.
Expert technical guidance on engine powertrain structural components and proper installation procedures for the 1000295905 flywheel housing is readily available. We assist in ensuring reliable transmission interface for your Shacman engine application.
Complete quality documentation for 1000295905 is available upon request, encompassing material certifications and dimensional inspection reports for your permanent maintenance and service records.
For current stock availability of the genuine 1000295905 flywheel housing, please use the contact buttons above.
