Shacman WP10 Connecting Rod Assembly is a precision-engineered core component for heavy-duty commercial vehicles, specifically designed for WP10 series engines. This assembly integrates three vital forged parts: Connecting Rod, Connecting Rod Bush, and Connecting Rod Bolt. Manufactured under strict Shacman OEM standards, it delivers exceptional strength, fatigue resistance, and perfect balance for high-torque applications. Whether you are rebuilding an engine or performing preventive maintenance, the Shacman WP10 Connecting Rod Assembly guarantees reliable power transmission and long service life in extreme conditions.
The Connecting Rod within the Shacman WP10 assembly is drop-forged from high-strength alloy steel, featuring precision fracture-split caps for superior alignment. Each rod is stress-tested and weight-matched to reduce vibration and enhance engine smoothness. It transfers explosive combustion force from the piston to the crankshaft with minimal distortion, ensuring maximum power output and fuel efficiency for WP10 engines.
The Connecting Rod Bush is manufactured using premium bronze alloy with a micro-finished inner surface, providing excellent lubricity and wear resistance. This bush maintains tight clearance tolerances, reduces friction between piston pin and small end, and extends overhaul intervals. Engineered for Shacman WP10 applications, it guarantees stable performance under fluctuating thermal loads and high RPM conditions.
The Connecting Rod Bolt is heat-treated to grade 12.9 tensile strength, featuring rolled threads and precision ground shank. Each bolt delivers consistent clamp load, preventing cap separation and rod bearing failure even under peak cylinder pressures. Used together with the Shacman WP10 Connecting Rod Assembly, these bolts guarantee joint integrity and simplify torque-to-yield installation procedures.
| Part Number | Part Name |
|---|---|
| 1002434192 | Connecting Rod |
| 1001781750 | Connecting Rod Bush |
| 611600030041 | Connecting Rod Bolt |
OEM-grade metallurgy: Our Shacman WP10 Connecting Rod Assembly uses micro-alloy forged steel, surpassing original factory durability tests. Every unit undergoes magnetic particle inspection to eliminate micro-cracks, ensuring zero failure risk in high-load operations.
Precision balancing & weight matching: Each Shacman WP10 Connecting Rod Assembly is weight-matched within 2 grams across the set. This dramatically reduces engine harmonics, prolongs crankshaft life, and improves overall fuel economy by minimizing parasitic losses.
Extreme durability validation: The Shacman WP10 Connecting Rod Assembly passed 10 million cycle fatigue tests and 500-hour thermal shock testing. It withstands cylinder pressures up to 220 bar, making it ideal for on-highway trucks, construction machinery, and marine applications.
Plug-and-play compatibility: Direct fit for all WP10 engine variants (WP10H, WP10E, WP10G). No modifications required. Supplied with pre-lubricated bush and premium bolts, the Shacman WP10 Connecting Rod Assembly reduces downtime and simplifies engine rebuilding.
The Shacman WP10 Connecting Rod Assembly is manufactured using C70S6 fracture-split steel, eliminating the need for separate machining of mating surfaces. This innovation guarantees perfect cap alignment and reduces assembly variations. Each connecting rod receives shot peening and induction hardening on the bolt seats, increasing fatigue strength by 40%.
All critical bores of the Shacman WP10 Connecting Rod Assembly are honed to a Ra ≤0.2µm surface finish. Big end bore roundness is kept within 5µm, ensuring consistent oil film thickness and bearing longevity. The small end bushing is press-fitted with 30kN interference, preventing rotation or loosening over lifetime.
Tested under extreme conditions, the Shacman WP10 Connecting Rod Assembly sustains continuous operation at 120°C oil sump temperature and transient peaks up to 250°C near the piston interface. The connecting rod bolts maintain clamping force under thermal expansion cycles, guaranteeing head gasket and bearing safety for over 1.2 million kilometers in real-world fleet tests.
Genuine Shacman WP10 Connecting Rod Assembly guarantees direct replacement for OE numbers 1002434192, 1001781750, 611600030041. Engine builders worldwide trust the Shacman WP10 Connecting Rod Assembly for its consistent metallurgy and improved fatigue margin over aftermarket copies. Upgrade your engine reliability with this precision component.
Optimized weight distribution lowers reciprocating mass by 8%, reducing internal friction and improving fuel consumption by up to 3.5% in long-haul applications.
Shacman WP10 Connecting Rod Assembly handles torque outputs exceeding 1600 Nm without permanent deformation, ideal for heavy-load climbing and off-road cycles.
Fracture-split caps ensure precise fit, significantly reducing engine knocking and mechanical noise, providing a quieter cabin environment.
Premium connecting rod bush and bolts enable 600,000 km maintenance-free operation under standard duty cycles, lowering total cost of ownership.
Each Shacman WP10 Connecting Rod Assembly is produced in IATF 16949 certified facilities, following strict Shacman original equipment specifications. 100% of assemblies undergo magnaflux crack detection, hardness verification, and dimensional laser scanning. The connecting rod bolt batches are tested for yield strength and torque retention. Our warranty covers manufacturing defects, and we provide batch traceability records upon request.
When you choose the Shacman WP10 Connecting Rod Assembly, you invest in genuine quality that eliminates premature failure risks. Independent lab tests confirm that our connecting rod withstands 30% higher dynamic loads than standard ISO 9001 components, making it the top choice for fleet operators and rebuilders.
Always replace the Shacman WP10 Connecting Rod Assembly as a complete set (rod, bush, bolts). Clean bolt holes thoroughly and apply light engine oil to threads. Use a torque-angle method: initial torque 60 Nm, then +90° for final angle. Ensure the connecting rod bush is aligned with the oil hole in the small end. Do not reuse old bolts; our Shacman WP10 Connecting Rod Assembly includes new fasteners for maximum clamping force.
Verify piston pin clearance before assembly – standard gap for WP10 engines is 0.015~0.035mm. After installation, rotate crankshaft to confirm free movement without binding. For professional results, always follow the Shacman workshop manual.
No, this assembly is specifically dimensioned for WP10 bore/stroke (126x130mm). WP12 engines require different rod length. Always verify engine model.
Look for laser-etched part numbers 1002434192, Shacman logo, and batch code on the rod beam. Our components come in branded anti-rust packaging with QR traceability.
All Shacman WP10 Connecting Rod Assembly sets are factory weight-matched to within 2 grams. No additional balancing is needed unless the crankshaft or pistons are non-standard.
Over 250,000 Shacman WP10 Connecting Rod Assemblies are currently in operation worldwide with a documented failure rate below 0.07% within the first 500,000 km. Extreme climate tests in deserts (55°C) and subarctic regions (-35°C) confirm consistent material toughness and lubrication compatibility. This component is standard for Shacman original aftermarket and reman programs.
The Shacman WP10 Connecting Rod Assembly also reduces oil degradation due to minimized blow-by gases from perfect ring sealing, supported by the rigid rod design. Maintenance intervals can be extended safely while protecting the crankshaft journals from uneven wear.
Our Shacman WP10 Connecting Rod Assembly is produced using electric arc furnace steel with 85% recycled content, reducing carbon footprint by 30% compared to conventional forging. All machining coolant is recycled and packaging uses FSC-certified cardboard. Choose sustainable performance without compromise.
Shacman WP10 Connecting Rod Assembly – the definitive solution for heavy-duty engine durability. From the connecting rod, connecting rod bush to connecting rod bolt, every detail ensures your WP10 engine performs flawlessly. Trust Shacman genuine parts for maximum uptime and operational efficiency.
Certified OEM replacement | 2-year limited warranty | Global logistics ready
