Oil Filter Wd615/WP10/12/13
Масляный Фильтр WD615
Filtro de Aceite WD615
The Shacman Oil Filter with OEM number 1000424655A represents the highest standard in engine protection technology for heavy-duty commercial vehicles. This premium filtration component is specifically engineered for WD615, WP10, WP12, and WP13 engine series, providing exceptional contaminant removal and oil purification capabilities. Manufactured using advanced synthetic media and precision engineering processes.
Each 1000424655A oil filter undergoes comprehensive quality testing to ensure optimal filtration efficiency and reliability. The specialized filter media captures microscopic particles as small as 10 microns while maintaining excellent oil flow characteristics. Professional mechanics and fleet managers trust this genuine Shacman component for maximum engine protection and extended service intervals.
The innovative multi-layer design incorporates synthetic fiber media, reinforced end caps, and anti-drain back valves to prevent dry starts. This engineering approach significantly extends engine component life while maintaining optimal oil pressure. Truck operators appreciate the reliable performance and reduced maintenance costs associated with genuine Shacman filtration products.
| Parameter | Details |
|---|---|
| OEM Number | 1000424655A |
| Product Name | Oil Filter Wd615/WP10/12/13 |
| Brand | Shacman |
| Filter Type | Spin-On Full Flow |
| Thread Size | M20 x 1.5 |
| Height | 190mm |
| Diameter | 115mm |
| Filtration Efficiency | 99% at 10 microns |
| Burst Pressure | 450 PSI |
| Anti-Drain Valve | Silicone |
| Compatible Engines | WD615, WP10, WP12, WP13 |
| Warranty | 12 Months |
The 1000424655A oil filter utilizes advanced synthetic fiber media specifically engineered for heavy-duty diesel engines. This premium material provides superior contaminant capture while maintaining optimal oil flow rates. The multi-density construction ensures progressive filtration throughout the filter’s service life.
Micro-glass layers are integrated into the media to enhance filtration efficiency for particles as small as 10 microns. This technology prevents abrasive wear on critical engine components including bearings, camshafts, and cylinder walls. The media retains its structural integrity under high-pressure conditions.
Computer-optimized pleat spacing maximizes filtration surface area while preventing media collapse. The steel center tube provides structural support and ensures consistent oil distribution. Precision-welded end caps create permanent seals that withstand vibration and thermal cycling.
The silicone anti-drain back valve maintains oil in the filter housing during engine shutdown, preventing dry starts. The high-temp gasket material ensures leak-free operation across the entire operating temperature range. Engineering simulations validate performance under extreme conditions.
The Oil Filter 1000424655A delivers exceptional contaminant removal, capturing 99% of particles at 10 microns and larger. This high efficiency significantly reduces engine wear and extends component service life. The consistent filtration performance maintains oil cleanliness throughout the service interval.
Reduced abrasive contamination protects critical engine components including turbochargers, piston rings, and crankshaft bearings. The optimized flow characteristics ensure adequate oil supply to all engine parts even under cold start conditions. Professional mechanics report noticeably cleaner engine oil during drain intervals.
Extended service life results from the robust construction and advanced media technology. The filter withstands high oil pressures and temperature fluctuations without performance degradation. Maintenance records show reliable operation throughout the recommended change intervals.
Corrosion-resistant steel housing protects against environmental damage and chemical exposure. The component maintains filtration integrity in various climate conditions and operating environments. Long-term reliability reduces total operating costs for fleet owners.
The 1000424655A is engineered specifically for Shacman WD615, WP10, WP12, and WP13 engine series. Comprehensive testing ensures seamless integration with existing lubrication systems. The design matches original equipment specifications precisely for perfect installation.
Thread dimensions and sealing surfaces align perfectly with engine mounting bosses. Installation requires no modifications or additional components. The filter interfaces correctly with standard oil filter wrenches and removal tools.
This oil filter suits various heavy-duty applications including long-haul transport, construction equipment, and mining vehicles. The robust design handles diverse operating conditions and oil types effectively across different industries.
From highway cruising to severe off-road operation, the component maintains consistent filtration performance. The engineering accounts for different oil viscosities and service intervals. Reliability remains uncompromised in demanding environments.
The 1000424655A features standard spin-on design for quick and easy installation. Professional mechanics can complete replacement within fifteen minutes using basic tools. Comprehensive instructions guide proper gasket lubrication and torque specifications.
Clear installation markings indicate correct orientation and seating position. The design minimizes installation errors and ensures optimal performance from initial operation. Technical support documentation provides detailed guidance for proper installation procedures.
Recommended change intervals align with standard engine service schedules, typically every 15,000 kilometers or 500 operating hours. Regular oil analysis helps determine optimal replacement timing based on actual operating conditions.
Proper disposal procedures ensure environmental compliance with used filter handling. The design allows complete oil drainage before removal, minimizing mess and environmental impact. Technicians appreciate the user-friendly design that simplifies maintenance procedures.
The Shacman Oil Filter incorporates multiple safety enhancements to prevent lubrication system failures. The robust construction maintains structural integrity even under extreme pressure conditions. Engineering tests validate performance during cold starts and high-temperature operation.
Built-in bypass valve protection ensures continuous oil flow in case of filter clogging or extreme cold conditions. The safety features prevent engine damage during abnormal operating scenarios. Regular quality audits ensure consistent safety performance across all production batches.
Professional mechanics report increased confidence in engine protection and reliability. The dependable performance enhances vehicle uptime and reduces unexpected breakdowns. Safety remains the highest priority throughout design and manufacturing processes.
Every 1000424655A unit undergoes rigorous quality control procedures at multiple production stages. Advanced testing equipment validates burst pressure, filtration efficiency, and bypass valve operation. Each filter is pressure tested to ensure leak-free performance.
The manufacturing process incorporates statistical process control methods to maintain consistent quality. Each production batch must pass strict quality benchmarks before shipment approval. Independent laboratories verify compliance with international automotive standards.
The component meets ISO 9001 quality management system requirements and automotive industry specific standards. Additional certifications include material performance validation and environmental testing. Regular audits ensure continuous improvement in manufacturing processes.
Quality documentation provides complete traceability from raw materials to finished product. This comprehensive approach guarantees consistent product excellence and customer satisfaction throughout the product lifecycle and service intervals.
The 1000424655A delivers exceptional value through extended engine life and reduced maintenance requirements. The initial investment provides long-term savings through decreased engine repairs and component replacements. Fleet operators document significant operational cost reductions.
Improved engine protection minimizes unexpected failures and associated downtime costs. The superior filtration extends oil change intervals while maintaining engine cleanliness. Total cost of ownership analysis demonstrates strong economic advantages over inferior alternatives.
Enhanced engine reliability contributes to improved vehicle availability and productivity. The consistent filtration performance reduces wear on expensive engine components, extending their service life. These factors combine to create substantial operational savings over time.
Reduced maintenance frequency frees up resources for other operational needs. The reliability ensures consistent vehicle performance for revenue-generating activities. Business owners appreciate the positive impact on overall fleet profitability and operational efficiency metrics.
Shacman provides comprehensive 12-month warranty coverage for the Oil Filter 1000424655A. This protection includes manufacturing defects and material workmanship, ensuring complete customer satisfaction. The warranty terms reflect the company’s confidence in product quality and performance.
Technical support services offer expert assistance for installation queries and application questions. The support team possesses extensive knowledge of heavy-duty engine lubrication systems and requirements. Global distribution networks ensure timely parts availability worldwide.
Customer service representatives provide prompt responses to technical inquiries and operational concerns. The support system maintains detailed service records for continuous product improvement. This commitment to customer care builds long-term relationships and trust with commercial vehicle operators.
The Shacman Oil Filter 1000424655A represents the ultimate in engine protection technology for heavy-duty commercial vehicles. Its superior filtration efficiency, reliable performance, and safety features make it the preferred choice for professional mechanics, fleet managers, and owner-operators worldwide.
Through continuous innovation and uncompromising quality control, Shacman delivers products that consistently exceed industry expectations. The 1000424655A demonstrates the company’s commitment to excellence and customer satisfaction in every aspect of design and manufacturing.
For commercial vehicle operators seeking maximum engine protection, extended component life, and operational reliability, the Shacman Oil Filter provides a proven solution backed by comprehensive warranty protection and exceptional technical support expertise.
