EGP Bracket
Кронштейн EGP
Soporte EGP
OEM EGP Bracket DZ95259547087 precision‑engineered for the Shacman X5000 exhaust after‑treatment system. This robust DZ95259547087 mounting component secures the exhaust gas processor to the chassis, maintaining proper alignment under extreme conditions.
Fabricated from high‑strength structural steel with heat‑resistant coating, the EGP Bracket DZ95259547087 withstands the combined loads of exhaust system weight, thermal expansion, and continuous chassis vibration.
Replacing a cracked or corroded bracket with the genuine DZ95259547087 component restores proper EGP support and prevents the exhaust leaks caused by misaligned or stressed connections.
| Parameter | Specification |
|---|---|
| OEM Part Number | DZ95259547087 |
| Product Name | EGP Bracket |
| Brand / Model | Shacman X5000 |
| Material | High‑Strength Structural Steel with Heat‑Resistant Coating |
| Bracket Type | Formed steel support with welded gussets |
| Mounting Hole Diameter | 12.00 mm (chassis frame bolt points) |
| EGP Mounting Pattern | 4‑point mounting with vibration isolators |
| Load Capacity | Supports up to 55 kg EGP assembly |
| Corrosion Protection | Heat‑resistant coating, 500 hours salt spray rated |
| Application | Shacman X5000 exhaust gas processor chassis mounting |
The DZ95259547087 EGP bracket is the structural foundation that secures the exhaust gas processor to the Shacman X5000 chassis. It must safely support the weight of the EGP unit through all vehicle maneuvers.
The exhaust gas processor operates at high temperatures and contains sensitive catalyst materials. Proper bracket support prevents the mechanical stress that could crack the EGP housing or compromise internal substrates.
The EGP Bracket DZ95259547087 incorporates vibration isolators that dampen chassis vibrations before they reach the EGP unit, protecting the ceramic catalyst substrate from mechanical shock damage.
The DZ95259547087 bracket is fabricated from high‑strength structural steel with welded reinforcement gussets at stress points. The heat‑resistant coating protects against the radiated exhaust temperatures.
The coating withstands 500 hours of salt spray exposure, providing long‑term corrosion protection even in the demanding under‑chassis environment where road salt and moisture are constantly present.
The DZ95259547087 bracket mounts to pre‑drilled chassis frame holes using high‑strength bolts. The EGP unit then bolts to the bracket with vibration isolators at each mounting point.
All fasteners must be torqued to specification. After installation, exhaust connections should be checked for proper alignment to ensure no preload exists on the EGP inlet and outlet flanges.
Each production batch of DZ95259547087 brackets undergoes static load testing at three times rated capacity. The bracket must show no permanent deformation or weld cracking after testing.
Coating thickness and adhesion are verified on sample brackets. The heat‑resistant coating must maintain integrity through thermal cycling tests simulating exhaust system operation.
Rust staining or coating delamination on the DZ95259547087 bracket indicates corrosion has penetrated the protective layer. If unchecked, this reduces the effective metal thickness.
Cracks at weld joints or bolt holes are evidence of fatigue. Cracked brackets must be replaced immediately to prevent EGP detachment that could damage the exhaust system and create a fire hazard.
During exhaust system inspections, brackets and isolators should be checked for condition. Worn isolators allow excessive movement and should be replaced along with any damaged brackets.
The DZ95259547087 bracket is specifically configured for the Shacman X5000 EGP mounting interface and chassis hole pattern, matching the factory‑specified attachment points exactly.
Fleet operators should maintain spare EGP brackets and isolators for replacement during exhaust system service. Prompt replacement prevents the secondary damage caused by loose exhaust components.
Aftermarket brackets with inadequate strength can fail, causing exhaust system damage. We supply only the authentic Shacman X5000 EGP Bracket DZ95259547087 built to OEM specifications.
Each bracket is individually packaged with protective wrapping. The part number DZ95259547087 is clearly displayed on the packaging for immediate identification.
Our international logistics network ensures genuine DZ95259547087 EGP brackets are available for dispatch to dealerships and fleet facilities worldwide.
Complete EGP bracket with integrated gussets and vibration isolators. Protective packaging prevents coating damage during transit.
Expert guidance on EGP bracket installation and exhaust system alignment. We help ensure your DZ95259547087 bracket provides secure support.
For current stock availability on the genuine EGP Bracket DZ95259547087, please use the contact buttons above.
