Tail Beam
Задняя Поперечная Балка
Viga Trasera Transversal
OEM Tail Beam DZ96259513226 precision‑engineered for the Shacman X5000 rear chassis structure. This robust DZ96259513226 crossmember closes the frame at the rear, providing lateral stiffness and mounting points for rear body components.
Fabricated from high‑strength structural steel with durable anti‑corrosion coating, the Tail Beam DZ96259513226 withstands the combined loads of rear-mounted equipment, towing forces, and chassis torsion during operation.
Replacing a damaged or corroded tail beam with the genuine DZ96259513226 component restores proper rear frame integrity and maintains the alignment essential for safe vehicle operation.
| Parameter | Specification |
|---|---|
| OEM Part Number | DZ96259513226 |
| Product Name | Tail Beam |
| Brand / Model | Shacman X5000 |
| Material | High‑Strength Structural Steel with Black Powder Coating |
| Beam Profile | C‑channel with welded end flanges and gussets |
| Overall Length | Approximately 880.00 mm |
| Flange Bolt Pattern | Multiple holes per flange, 14.00 mm diameter |
| Corrosion Protection | Black powder coating, 600 hours salt spray rated |
| Load Capacity | Engineered for rear frame and towing loads |
| Application | Shacman X5000 rear chassis frame closure and body mounting |
The DZ96259513226 tail beam is the rearmost crossmember of the Shacman X5000 chassis frame. It closes the frame structure at the rear, connecting the left and right longitudinal rails to complete the frame assembly.
This beam provides mounting points for the rear body structure, lighting brackets, mudguards, and towing equipment. It must withstand the pulling and shock loads associated with trailer towing operations.
The Tail Beam DZ96259513226 also contributes to overall frame torsional rigidity, helping to maintain proper alignment of the rear frame rails under the dynamic loading conditions of heavy‑duty operation.
The DZ96259513226 tail beam features a C‑channel profile with welded end flanges and reinforcement gussets that provide additional strength at the highly stressed junction with the longitudinal frame rails.
The black powder coating provides durable protection against stone chips, road spray, and corrosion, maintaining the beam’s structural cross‑section throughout the vehicle’s service life in demanding environments.
The DZ96259513226 tail beam bolts to pre‑drilled holes at the rear of the chassis frame rails. All fasteners must be tightened to specification following the assembly sequence in the service manual.
Rear frame alignment must be verified after installation to ensure both rails are parallel and at the correct spacing. Misalignment affects body mounting and rear axle tracking during vehicle operation.
Each production batch of DZ96259513226 tail beams undergoes dimensional verification and weld integrity inspection to ensure flange angles and hole positions conform to engineering specifications.
Welded gusset joints are visually inspected and sampled for non‑destructive testing to verify complete penetration and absence of defects that could compromise structural performance under rear loading conditions.
Rust staining or bubbling of the powder coating on the DZ96259513226 tail beam indicates corrosion has penetrated the protective layer, potentially reducing structural capacity over time.
Cracks at weld joints, gussets, or flange bolt holes are evidence of fatigue. A cracked tail beam must be replaced immediately to maintain the integrity of the rear frame structure.
During chassis inspections, the tail beam and its fasteners should be checked for tightness and condition. Loose bolts allow movement that accelerates wear and fatigue at the rear frame connection points.
The DZ96259513226 tail beam is specifically configured for the rear of the Shacman X5000 chassis, with flange bolt patterns and dimensions matching this vehicle platform’s frame rail specifications.
Fleet operators should maintain spare tail beams for prompt replacement when rear collision damage or corrosion compromises the original structural member during vehicle service and repair operations.
Aftermarket tail beams with incorrect specifications can compromise rear frame integrity. We supply only the authentic Shacman X5000 Tail Beam DZ96259513226 built to stringent OEM quality standards.
Each tail beam is individually packaged with edge protection. The part number DZ96259513226 is clearly displayed on the component and packaging for immediate identification.
Our international logistics network ensures genuine DZ96259513226 tail beams are available for dispatch to dealerships, collision repair centers, and fleet facilities worldwide.
Complete tail beam with welded end flanges, gussets, and powder coating. Ready for rear chassis frame installation with appropriate fasteners.
Expert guidance on tail beam installation and rear frame alignment. We help ensure your DZ96259513226 beam provides reliable structural closure.
For current stock availability on the genuine Tail Beam DZ96259513226, please use the contact buttons above.
