Cross Beam Assembly
Поперечная Балка в Сборе
Travesaño Transversal Completo
OEM Cross Beam Assembly DZ96219510301 precision‑engineered for the Shacman X5000 chassis frame. This robust DZ96219510301 lateral member connects the left and right frame rails, providing torsional rigidity and serving as a mounting foundation.
Fabricated from high‑strength structural steel with welded end flanges and durable coating, the Cross Beam Assembly DZ96219510301 withstands the cyclical stresses of heavy‑duty vehicle operation.
Replacing a damaged or corroded cross beam with the genuine DZ96219510301 assembly restores proper chassis stiffness and prevents the misalignment that causes uneven tire wear and handling issues.
| Parameter | Specification |
|---|---|
| OEM Part Number | DZ96219510301 |
| Product Name | Cross Beam Assembly |
| Brand / Model | Shacman X5000 |
| Material | High‑Strength Structural Steel with Black E‑coat |
| Beam Profile | C‑channel section with welded end flanges |
| Overall Length | Approximately 860.00 mm |
| Flange Bolt Pattern | Multiple holes per flange, 14.00 mm diameter |
| Corrosion Protection | Electrophoretic coating, 480 hours salt spray rated |
| Load Capacity | Engineered for heavy‑duty chassis reinforcement |
| Application | Shacman X5000 chassis frame lateral connection |
The DZ96219510301 cross beam assembly connects the left and right longitudinal frame rails at a designated chassis location. It prevents the rails from spreading or twisting relative to each other.
When the Shacman X5000 traverses uneven terrain, the frame experiences torsional loading. The cross beam resists this motion, maintaining the structural integrity of the entire chassis assembly under load.
This assembly also functions as a mounting platform for various chassis‑mounted components, providing secure attachment points for exhaust brackets, air reservoirs, and related vehicle systems.
The DZ96219510301 cross beam features a C‑channel profile that provides excellent bending strength. Welded end flanges ensure robust attachment to the frame rails at each side of the chassis.
The electrophoretic coating provides uniform corrosion protection across all surfaces, including the interior of the channel and the junction between the beam and its welded connection flanges.
The DZ96219510301 assembly bolts to pre‑drilled holes in the chassis frame rails using high‑strength fasteners. Bolts must be installed loosely initially, then tightened progressively after alignment.
Proper installation requires parallel frame rails at the specified distance. Forcing the cross beam into position with misaligned rails introduces residual stresses that can lead to premature cracking.
Each production batch of DZ96219510301 assemblies undergoes dimensional verification and weld integrity inspection to ensure flange positions and overall geometry conform to specifications.
Welded joints are visually inspected and sampled for non‑destructive testing to verify complete penetration and absence of defects that could compromise structural performance in service.
Rust staining or coating delamination on the DZ96219510301 assembly indicates corrosion penetration. If unchecked, this reduces material thickness and load‑bearing capacity over time.
Cracks at weld junctions or flange bolt holes are evidence of fatigue. A cracked cross beam must be replaced immediately to prevent frame distortion and potential component detachment.
During chassis inspections, cross beams and their fasteners should be checked for tightness and condition. Loose bolts allow movement that accelerates wear and fatigue at the connection points.
The DZ96219510301 assembly is specifically configured for the Shacman X5000 frame rail spacing and bolt hole patterns, matching factory‑specified mounting locations exactly.
Fleet operators should maintain spare cross beam assemblies for prompt replacement when collision damage or corrosion compromises the original structural member during vehicle service.
Aftermarket cross beams with inadequate material may compromise chassis safety. We supply only the authentic Shacman X5000 Cross Beam Assembly DZ96219510301 built to OEM specifications.
Each assembly is individually packaged with edge protection. The part number DZ96219510301 is clearly displayed on the component and packaging for immediate identification.
Our international logistics network ensures genuine DZ96219510301 cross beam assemblies are available for dispatch to dealerships and fleet facilities worldwide.
Complete cross beam assembly with welded end flanges and e‑coat finish. Ready for chassis frame installation with appropriate fasteners.
Expert guidance on cross beam installation and frame alignment. We help ensure your DZ96219510301 assembly provides reliable structural reinforcement.
For current stock availability on the genuine Cross Beam Assembly DZ96219510301, please use the contact buttons above.
