Flexible Shaft Clamp Block
Зажимной Блок Гибкого Вала
Bloque de Sujeción de Cable
OEM Flexible Shaft Clamp Block DZ98189240217 precision‑engineered for the Shacman X5000 transmission shift control system. This sturdy DZ98189240217 mounting component secures the flexible shift cables, maintaining proper routing and termination for precise gear changes.
Fabricated from high‑strength structural steel with durable anti‑corrosion coating, the Flexible Shaft Clamp Block DZ98189240217 withstands the forces transmitted through the shift cables during continuous transmission operation.
Replacing a cracked or loose clamp block with the genuine DZ98189240217 component restores proper cable anchoring and prevents the linkage movement that causes imprecise gear selection and transmission wear.
| Parameter | Specification |
|---|---|
| OEM Part Number | DZ98189240217 |
| Product Name | Flexible Shaft Clamp Block |
| Brand / Model | Shacman X5000 |
| Material | High‑Strength Structural Steel with Black E‑coat |
| Block Type | Formed steel cable clamp with dual mounting holes |
| Mounting Hole Diameter | 10.50 mm (2 chassis bolt points) |
| Cable Clamp Diameter | Approximately 22.00 mm with retaining bolt |
| Material Thickness | 4.00 mm |
| Corrosion Protection | Electrophoretic coating, 480 hours salt spray rated |
| Application | Shacman X5000 shift flexible shaft cable chassis mounting |
The DZ98189240217 flexible shaft clamp block anchors the outer conduit of the shift control cables to the Shacman X5000 chassis, providing the rigid termination point essential for proper push‑pull cable function.
Push‑pull control cables require the outer conduit to be securely fixed at both ends. Without rigid clamping, cable movement absorbs the intended control motion instead of transferring it to the transmission selector mechanism.
The Flexible Shaft Clamp Block DZ98189240217 positions the shift cable at the correct approach angle to the transmission linkage, ensuring straight‑line cable travel without binding or excessive bend radius.
The DZ98189240217 block is fabricated from high‑strength structural steel with formed clamping features. The electrophoretic coating provides uniform corrosion protection across all surfaces.
The clamping bolt and saddle design securely grips the cable conduit without crushing it, maintaining the internal clearance needed for smooth inner core movement during gear selection and shift operations.
The DZ98189240217 clamp block mounts to the chassis using two high‑strength bolts. The flexible shaft cable is placed in the saddle and the retaining bolt tightened to secure the conduit.
The retaining bolt must be tightened sufficiently to prevent cable movement without crushing the outer conduit. The cable should be routed following the original path to maintain proper shift linkage geometry.
Each production batch of DZ98189240217 clamp blocks undergoes dimensional inspection to verify saddle diameter, hole positions, and overall geometry against engineering specifications using precision measurement.
Coating thickness and adhesion testing ensure the e‑coat finish meets durability requirements for long‑term chassis service in demanding environmental conditions.
Rust staining or coating delamination on the DZ98189240217 block indicates corrosion penetration. If unchecked, this reduces material thickness and compromises the clamp’s load‑bearing capacity.
A loose or deformed cable saddle allows the shift cable to move during gear selection, causing imprecise shifting and difficulty engaging gears that may lead to synchronizer damage over time.
During transmission service, the clamp block and its hardware should be inspected for tightness and condition. Loose or damaged components must be replaced to maintain proper shift cable function.
The DZ98189240217 clamp block is specifically configured for the Shacman X5000 shift cable diameter and chassis mounting pattern, matching the factory‑specified cable routing and retention requirements.
Fleet workshops should maintain spare clamp blocks for replacement during transmission service, ensuring continued secure cable anchoring and precise gear selection control.
Aftermarket clamp blocks with incorrect dimensions can misalign shift cables. We supply only the authentic Shacman X5000 Flexible Shaft Clamp Block DZ98189240217 built to OEM dimensional specifications.
Each clamp block is individually packaged with protective wrapping. The part number DZ98189240217 is clearly printed on the packaging for immediate identification and verification.
Our international logistics network ensures genuine DZ98189240217 flexible shaft clamp blocks are available for dispatch to dealerships and fleet maintenance facilities worldwide.
Complete clamp block with retaining bolt, saddle, and e‑coat finish. Ready for chassis installation and flexible shaft cable attachment.
Expert guidance on clamp block installation and shift cable routing. We help ensure your DZ98189240217 block provides secure cable anchoring for precise gear control.
For current stock availability on the genuine Flexible Shaft Clamp Block DZ98189240217, please use the contact buttons above.
