Q-Type Clamp
Q-Образный Хомут
Abrazadera Tipo Q
OEM Q-Type Clamp DZ96259240132 precision‑engineered for the Shacman X5000 air intake and cooling systems. This versatile DZ96259240132 quick‑release fastener secures hoses, ducts, and cylindrical components with reliable clamping force and tool‑free operation.
Constructed from high‑strength spring steel with corrosion‑resistant plating, the Q-Type Clamp DZ96259240132 maintains consistent tension through temperature cycling while allowing rapid service access to connected components.
Replacing a damaged or weakened Q‑type clamp with the genuine DZ96259240132 component ensures secure hose retention and prevents the leaks that cause system inefficiency and potential engine damage.
| Parameter | Specification |
|---|---|
| OEM Part Number | DZ96259240132 |
| Product Name | Q-Type Clamp |
| Brand / Model | Shacman X5000 |
| Material | Spring Steel with Zinc Electroplating |
| Clamp Type | Q-type quick release with over‑center latch |
| Clamping Diameter Range | Approximately 70.00 mm to 80.00 mm |
| Band Width | 12.00 mm |
| Corrosion Protection | Zinc electroplating, 200 hours salt spray rated |
| Latch Operation | Tool‑free manual open and close |
| Application | Shacman X5000 hose and duct quick‑release retention |
The DZ96259240132 Q‑type clamp provides secure, adjustable retention for air intake ducts, coolant hoses, and charge air piping throughout the Shacman X5000 engine and chassis systems.
The over‑center latch mechanism allows rapid clamping and release without tools, significantly reducing service time when components need to be disconnected for maintenance, inspection, or replacement procedures.
The spring steel band maintains consistent clamping force as the clamped component expands and contracts with temperature changes, preventing the loosening that occurs with fixed‑diameter rigid clamps under thermal cycling.
The DZ96259240132 clamp is manufactured from heat‑treated spring steel that maintains its elastic clamping force through repeated opening and closing cycles without permanent deformation.
The zinc electroplating provides sacrificial corrosion protection for the band and latch mechanism, ensuring the clamp remains functional and serviceable throughout its intended service life in under‑hood environments.
The DZ96259240132 clamp is closed by engaging the latch hook and pressing the over‑center lever to the locked position. The clamp should be fully seated with the band evenly positioned around the hose.
During component service, the latch is released by pulling the lever outward. The clamp and hose connection should be inspected for damage or deterioration before reassembly and clamping.
Each production batch of DZ96259240132 clamps undergoes dimensional verification and clamping force measurement to ensure the latch mechanism achieves the specified retention force at the nominal diameter.
The latch mechanism is cycle‑tested to verify it maintains consistent locking performance through repeated opening and closing, validating its durability for multiple service operations over the vehicle’s life.
A DZ96259240132 clamp that does not latch firmly or pops open indicates the latch mechanism has worn or the spring band has lost tension, requiring immediate clamp replacement.
Rust staining on the band or latch indicates the zinc plating has been compromised. Corroded components may seize or fracture during operation, losing their ability to maintain proper clamping force.
During system inspections, Q‑type clamps should be checked for secure latching and band condition. Replacing compromised clamps prevents the hose disconnections that cause system failures and fluid loss.
The DZ96259240132 clamp is dimensioned for specific hose and duct diameters used on the Shacman X5000 intake and cooling systems, matching the factory‑specified clamping requirements.
Fleet workshops should maintain spare Q‑type clamps for replacement during system service, ensuring secure connections are restored when components are reassembled after maintenance procedures.
Aftermarket Q‑type clamps with incorrect latch tension or inferior materials can fail unexpectedly. We supply only the authentic Shacman X5000 Q-Type Clamp DZ96259240132 manufactured to OEM specifications.
Clamps are packaged in protective quantities suitable for workshop use. The part number DZ96259240132 is clearly printed on the packaging for rapid identification and reordering.
Our international distribution network ensures genuine DZ96259240132 Q‑type clamps are always available for dispatch to dealerships and fleet maintenance facilities worldwide.
Single Q‑type clamp with integrated over‑center latch. Zinc‑plated for corrosion protection and ready for tool‑free installation and removal.
Expert guidance on Q‑type clamp application and service procedures. We help ensure your DZ96259240132 clamps provide secure, reliable hose retention.
For current stock availability on the genuine Q-Type Clamp DZ96259240132, please use the contact buttons above.
