Shacman X5000 Telescopic Transmission Shaft-28000Nm-720mm-110 is an OEM-grade driveline component for shorter wheelbase chassis. It delivers 28,000 Nm yield torque with 180mm end fitting and 110mm telescopic stroke.
Designed by Shacman, this shaft has a compact 720mm overall length. The Shacman X5000 Telescopic Transmission Shaft-28000Nm-720mm-110 is ideal for front axle drive or auxiliary PTO applications.
This telescopic transmission shaft (Part 4010101-DZ911431) is rated for 28,000 Nm yield torque. The 180mm end fitting (DIN flange) connects to standard axle inputs. Telescopic stroke of 110mm accommodates suspension articulation. Overall length 720mm makes it perfect for X5000 models with short wheelbase or front‑axle drive. The shaft is constructed from cold‑drawn seamless steel tube (4140 grade), heat treated to 36 HRC. Dynamic balancing G16 ensures smooth running up to 3500 rpm. The spline has 22 teeth, induction hardened and ground. Includes double‑lip sealed universal joints with high‑temperature grease. Corrosion protection: phosphate plus black paint. Suitable for up to 2.5 million cycles. Direct OEM replacement for original equipment.
28,000 Nm yield | 110mm stroke | 720mm OAL | 180mm flange
The second variant (6010006-DZ911431) shares identical core specifications: 28,000 Nm yield torque, 180mm end, 110mm telescopic stroke, and 720mm length. This version features an upgraded external boot that offers superior sealing against mud and dust. The inner shaft is hard chrome plated (30μm thickness) for extended sliding life. Universal joints are serviceable with grease zerks, allowing easy maintenance. Both yokes are forged from 42CrMo steel and CNC finished. The shaft tubes are hydroformed for consistent wall thickness. Each unit is 100% balance tested and magnaflux inspected. Compatible with the same applications as the 4010101 version. Ideal for Shacman X5000 4×2 tractors and concrete mixer trucks where space is limited. Supplied with new flange bolts and washers.
Same ratings | Enhanced dust boot | Greaseable joints
| Part Number | Part Name |
|---|---|
| 4010101-DZ911431 | Code: 4010101/Telescopic Transmission Shaft/Yield 28000Nm/180 End/Telescopic Length 110/Length 720 |
| 6010006-DZ911431 | Code: 6010006/Telescopic Transmission Shaft/Yield 28000Nm/180 End/Telescopic Length 110/Length 720 |
Complete OEM part numbers and names for Shacman X5000 telescopic transmission shaft (28,000 Nm version).
✔️ 100% OEM Fit & Compact Design – Precision manufactured to Shacman drawings. 720mm length suits short wheelbase X5000 models. 180mm flange pattern matches original driveline components. No cutting or welding required.
⚙️ Reliable 28,000 Nm Torque Capacity – Handles engine output up to 550 hp. Spline fatigue life exceeds 1.8 million cycles. Ideal for regional haul and vocational trucks. Prevents twisting or spline stripping under peak loads.
🛡️ Advanced Sealing & Corrosion Protection – The 6010006 variant includes heavy‑duty gaiter boot. Both models have phosphate coating and black paint. Chromed inner shaft reduces wear and resists pitting. Salt spray tested 500 hours.
🚛 Lower Driveline Maintenance – Greaseable universal joints (6010006) allow extended service intervals. Balanced to G16 minimizes vibration, saving axle seals and bearings. 12‑month unlimited‑mileage warranty. Bulk discounts for fleets.
Yield torque: 28,000 Nm. Ultimate torque: 48,000 Nm. Maximum speed: 3,200 rpm. Static angle: 22 degrees, dynamic angle: 14 degrees. Spline: 22 teeth, 38mm major diameter, involute side fit. Sliding resistance: ≤ 12 N. Weight: 28 kg. This Shacman X5000 Telescopic Transmission Shaft-28000Nm-720mm-110 complies with DIN 76022 Class 3.
End fitting: 180mm diameter flange with 6 x M12 bolts on 115mm PCD. Flange thickness 16mm. Residual unbalance < 8 g·cm. Torsional backlash ≤ 0.15 degrees. Each shaft is serialized with test certificate.
Temperature Range
Continuous -40°C to +110°C. Grease effective to 140°C. Boot resistant to -45°C.
Applications
Shacman X5000 4×2, X3000 short cab, concrete mixers, dump trucks with wheelbase ≤ 3200mm.
Certifications
IATF 16949, ISO 14001. Shaft supplied with 3.1 material certificate and balance report.
Verify overall length compressed to 720±2mm. Clean flange faces. Use new bolts (grade 10.9) torqued to 95 Nm. Apply medium thread locker. Grease universal joints every 25,000 km using NLGI #2 moly grease. Inspect boot for damage – replace if torn. Check spline radial play annually – maximum 0.6mm. The Shacman X5000 Telescopic Transmission Shaft-28000Nm-720mm-110 must be installed with phasing marks aligned.
After installation, run at idle and listen for unusual noise. Re‑torque flange bolts after 500 km. Avoid exceeding 110mm stroke – limit suspension travel if necessary.
Tube: Seamless 4140 steel, quenched and tempered (28-32 HRC). Inner shaft: 4150 steel, induction hardened (HRC 55-60) and hard chrome plated. Universal joint cross: 20CrMnTi, carburized (HRC 58-62). Needle bearings: SAE 52100 steel, crown ground. Boot: Chloroprene with polyester cord (6010006). All production is IATF 16949 certified.
100% of shafts undergo magnetic particle inspection on spline and weld zones. Dynamic balancing on two-plane machines. Traceability barcode on tube.
Using genuine Shacman X5000 Telescopic Transmission Shaft-28000Nm-720mm-110 avoids premature failures common with cheap replacements. The enhanced boot and chromed spline extend replacement intervals by 40% compared to aftermarket. Reduce downtime and roadside breakdowns. Volume pricing available for 5+ units.
Order direct from stock. Download catalog or request quotation via buttons above. Fast logistics to global destinations.
Vibration starting at 60 km/h, clunking when shifting from reverse to drive, grease leaking from joints, visible rust or pitting on exposed shaft, excessive rotational free play. Replace with genuine Shacman X5000 Telescopic Transmission Shaft-28000Nm-720mm-110 immediately to avoid differential damage.
Inspect at each preventive maintenance interval. Re‑grease joints even if no signs of wear.
Aftermarket shafts often use lower grade C45 steel with yield torque below 20,000 Nm. Splines are hobbed not ground, causing premature wear. Boots are thin neoprene that cracks in one year. Our genuine Shacman X5000 Telescopic Transmission Shaft-28000Nm-720mm-110 uses induction hardened splines and double‑lip sealed joints. The 6010006 variant adds a rugged gaiter boot. Choose original for safety and performance.
Final recommendation: Always replace the complete telescopic shaft set using genuine Shacman parts. The Shacman X5000 Telescopic Transmission Shaft-28000Nm-720mm-110 provides reliable power delivery in a compact package. Trust original equipment quality for long service life.
