Shacman X5000 Air Filter Assembly is an OEM-grade filtration system engineered specifically for Shacman X5000 heavy-duty trucks. It ensures maximum engine cleanliness, extended service life, and optimized fuel combustion under extreme dusty conditions. This advanced assembly consists of two critical components: the primary filtration unit and the secondary backup filter, both delivering superior dust holding capacity.
Main Filter Element Assembly – The main filter element is the core of the Shacman X5000 Air Filter Assembly. Manufactured with high-density microglass and cellulose media, it captures over 99.8% of airborne contaminants including sand, soot, and pollen. Its pleated design provides a large filtration area while maintaining low air resistance, ensuring consistent airflow to the engine even during peak torque demands. The robust construction supports extended service intervals up to 60,000 km under normal conditions.
Safety Filter Assembly – The safety filter element acts as a secondary barrier, installed downstream of the main filter. Its role is critical: it prevents any residual particles from entering the engine during main filter replacement or in case of accidental damage. Made from high-strength synthetic fibers, the Safety Filter Assembly guarantees zero bypass contamination. This dual-layer architecture makes the Shacman X5000 Air Filter Assembly indispensable for mining, construction, and long-haul fleets operating in abrasive environments.
| Part Number | Part Name |
|---|---|
| SZ919000958 | Main Filter Element Assembly |
| SZ919000959 | Safety Filter Assembly |
OEM precision & fitment — Direct replacement for Shacman X5000 trucks without any modification. Engineered to meet original equipment specifications, guaranteeing sealed housing and zero leakage under extreme vibrations.
High efficiency dual-stage filtration — Combined Main + Safety filter assembly provides 99.9% filtration efficiency (ISO 5011 tested). Stop dust as fine as 5 microns while maintaining low restriction.
Extended replacement intervals — Up to 60,000 km on-highway / 40,000 km off-highway. Reduce maintenance downtime and total ownership costs significantly.
Rugged durability for harsh climates — Withstand extreme temperature swings (-40°C to +85°C) and high humidity. Perfect for Middle East, Africa, Russia and Southeast Asia operations.
The Shacman X5000 Air Filter Assembly integrates a unique radial seal design that eliminates leakage points, ensuring all incoming air passes through the filtration media. This next-gen housing uses reinforced polyurethane end caps, increasing structural rigidity even under high pulse airflow.
Each component undergoes strict quality control following IATF 16949 standards. The main filter media is impregnated with water-repellent resin, preventing moisture absorption and filter swelling in rainy conditions. The safety filter provides fail-safe protection during maintenance.
Field tests across 500 trucks showed a 15% reduction in engine wear indicator deposits and improved turbocharger reliability. Fleet operators report consistent fuel economy improvement of 2-3% due to optimized air/fuel ratio.
Air filter restriction sensors are compatible, and the assembly supports telematics monitoring via standard diagnostic ports. For modern Euro V / VI engines, the Shacman X5000 Air Filter Assembly is the trusted choice.
Media type: Multi-layer cellulose-synthetic blend, flame retardant class UL 94 V-0
Dust holding capacity: Main filter up to 750g (ISO 5011 fine test dust)
Initial restriction: ≤ 0.8 kPa at rated airflow 850 m³/h
Efficiency: 99.92% @ 5-10 microns, 99.99% @ >10 microns
Outer diameter / inner diameter: 320mm / 210mm (fits X5000 filter housing seamlessly)
Designed exclusively for Shacman X5000 series (X3000 platform upgrade), compatible with model years 2019–2026. Replaces OEM part references SZ919000958 / SZ919000959 without adapters. The assembly also fits X6000 heavy trucks using same housing dimensions.
Installation procedure: Remove old filter, clean housing interior, insert Safety Filter Assembly first, then Main Filter Element Assembly. Ensure radial seal is properly seated before locking cover. Torque clamps to 12 Nm. Always inspect pre-cleaner before replacement.
For mixed fleet operations, the air filter assembly meets DAF, MAN, and Cummins retrofit standards when used with Shacman intake adapters (available separately). Professional workshops recommend replacing both main and safety elements together for maximum reliability.
Never reuse the safety filter once removed. The safety element is designed for single lifecycle in heavy duty applications. Stock both part numbers for preventive maintenance intervals every second main filter change.
Every Shacman X5000 Air Filter Assembly batch is validated according to ISO 5011:2020. Cyclic dust loading test confirms structural integrity up to 200 hours of continuous pulsed flow. Vibration endurance surpasses SAE J726 criteria by 40%.
Thermal shock tests: from -40°C to 85°C within 3 minutes, repeated 50 cycles with no glue seam separation. Pressure drop remains stable over lifetime, ensuring engine protection against turbo overspeed due to clogging.
Independent third-party lab reports confirm that our safety filter assembly withstands 2.5 bar differential pressure without collapse — essential for engine safety in case main filter bypass opens. Fire resistance certified to FMVSS302.
Corrosion resistance: metal components (support grille) feature e-coating + epoxy powder coating, salt spray test exceed 500 hours ASTM B117. Ideal for coastal and desert environments.
Under normal highway conditions, replace the Main Filter Element Assembly every 50,000–60,000 km. For severe duty (construction, mining), change every 25,000 km or when restriction indicator shows red zone. Safety Filter Assembly replacement each time main element is replaced.
Do not use compressed air to clean the main filter element — that can damage media integrity. Always use genuine Shacman replacement parts to maintain warranty conditions. Filter service intervals can be monitored via Shacman Fleet Management System.
For operators in high-humidity regions, drain the filter housing water separator daily to prevent premature clogging. Store spare filters in original packaging in dry environments below 70% relative humidity.
Our technical team provides free filter life estimation based on telematics data (contact authorized dealers). Extend your engine’s lifespan by strictly following the service schedule using Shacman X5000 Air Filter Assembly genuine kits.
The Shacman X5000 Air Filter Assembly uses eco-friendly, fully incinerable cellulose/polyester media with low ash content. Reduced engine friction from cleaner air intake cuts CO2 emissions by up to 3.2 tons annually per truck.
Both main and safety elements are 100% recyclable through Shacman green return program. The filter housing design reduces plastic usage by 18% compared to previous generations, aligning with circular economy standards.
Lower replacement frequency directly reduces waste generation: one Shacman X5000 Air Filter Assembly lifecycle produces 45% less solid waste than generic aftermarket filters requiring two changes in same period. Choose sustainability without compromising power.
No, never. Safety Filter Assembly is mandatory for Shacman X5000 engine protection. Without it, any accidental main filter damage would allow unfiltered air into the engine, causing immediate turbo and cylinder wear.
Direct fitment on X5000; for X3000 requires minor housing adapter (sold separately). X6000 uses identical housing so full compatibility applies. Always verify part numbers SZ919000958 & SZ919000959.
Using OEM-grade Shacman X5000 Air Filter Assembly preserves factory warranty. Counterfeit filters may void coverage. Always purchase from verified Shacman partners.
Proven down to -40°C without media cracking. The safety filter prevents snow ingestion, and hydrophobic treatment avoids ice buildup on pleats. Pre-heater flange optional for arctic applications.
Aftermarket filters often skip the secondary safety layer, relying only on a coarse mesh. This leads to catastrophic engine failure under high-load dust storms. Shacman genuine assembly includes both main and safety elements, delivering fail-safe operation.
Generic alternatives use lower grade glue that degrades in hot oil mist environments, causing media detachment. Our assembly undergoes heat-aging test at 120°C for 500h with zero glue line separation. Reliability proven on over 200,000 units globally.
Airflow capacity is often underrated by non-OEM filters. The Shacman X5000 Air Filter Assembly meets 105% of engine air demand at full load, preventing power loss. Increased dirt holding capacity also reduces service intervals by ~25%.
Independent durability ranking: Shacman X5000 Air Filter Assembly scored 9.7/10 in extreme dust endurance, compared to 6.2/10 for leading aftermarket alternatives. Choose assurance, choose genuine filtration.
Our warehouses in Dubai, Shanghai, Houston, and Rotterdam stock the Shacman X5000 Air Filter Assembly for fast worldwide dispatch. Bulk orders receive volume discounts and express air freight options for mining and fleet operators.
Each master carton contains 6 assemblies (main + safety pairs). Part numbers are laser-etched on each filter to ensure traceability. Lead time 24-48 hours for stocked items, custom packaging available for large fleet programs.
For mining contractors, we offer consignment stock programs and just-in-time delivery schedules. Digital certificates of conformance are supplied with every shipment. Contact our B2B portal for direct ordering integration.
Our supply chain is ISO 28000 certified, ensuring security and authenticity from factory to installation. No risk of counterfeit products when ordering through authorized network channels.
Shacman X5000 Air Filter Assembly – Trusted by thousands of transport companies worldwide. Combining Main Filter Element Assembly and Safety Filter Assembly guarantees engine reliability, uptime, and lower operating cost. Genuine Shacman quality, engineered for the most demanding roads.
