Lower Dust Cover
Нижний Пылезащитный Чехол
Protector Antipolvo Inferior
OEM Lower Dust Cover DZ96319240354 precision‑molded for the Shacman X5000 transmission shift mechanism. This flexible DZ96319240354 protective boot seals the lower shift lever opening, preventing dust, moisture, and debris from entering the cab and shift linkage.
Manufactured from durable elastomeric material with excellent flexibility, the Lower Dust Cover DZ96319240354 maintains its sealing integrity through millions of shift cycles without cracking or tearing in service.
Replacing a torn or missing dust cover with the genuine DZ96319240354 component restores the cab environmental seal and prevents the ingress that causes interior contamination and shift mechanism corrosion.
| Parameter | Specification |
|---|---|
| OEM Part Number | DZ96319240354 |
| Product Name | Lower Dust Cover |
| Brand / Model | Shacman X5000 |
| Material | Flexible EPDM Rubber with UV Stabilizers |
| Cover Type | Convoluted boot with mounting flange |
| Mounting Type | Push‑fit flange with integrated retaining lip |
| Operating Temperature | -40°C to +110°C |
| Flex Life | ≥ 1 million cycles without cracking |
| UV Resistance | Excellent, no cracking after extended exposure |
| Application | Shacman X5000 lower shift lever cab floor seal |
The DZ96319240354 lower dust cover seals the opening where the gear shift lever passes through the Shacman X5000 cab floor, creating a flexible barrier against environmental contaminants entering the interior.
Without this protective boot, road dust, engine compartment fumes, water spray, and cold air can enter the cab, reducing driver comfort and potentially affecting shift mechanism components with corrosion and contamination.
The convoluted design of the Lower Dust Cover DZ96319240354 flexes with shift lever movement throughout the full gear selection range without restricting travel or detaching from its mounting flange.
The DZ96319240354 cover is molded from EPDM rubber with UV stabilizers, providing outstanding resistance to ozone, sunlight, and the temperature extremes encountered in the cab floor environment.
The material remains flexible at low temperatures and resists hardening or cracking after prolonged exposure to heat radiating through the cab floor from the powertrain below during extended highway operation.
The DZ96319240354 cover installs by pressing its mounting flange into the cab floor opening until the retaining lip fully engages around the perimeter of the shift lever penetration.
During cab interior inspections, the dust cover should be checked for tears, deformation, or separation from the floor. Damaged covers must be replaced to maintain the environmental seal and shift mechanism protection.
Each production batch of DZ96319240354 covers undergoes dimensional verification and material hardness testing to ensure consistent fit and sealing performance across the operating temperature range.
Flex testing subjects sample covers to over one million actuation cycles while monitoring for cracks, tears, or loss of mounting retention, validating long‑term durability under real‑world conditions.
A torn or split DZ96319240354 cover allows visible gaps around the shift lever. Dust accumulation or water stains on the cab floor near the lever indicate seal failure and contamination ingress.
A cover that has pulled away from the floor opening no longer provides a seal. The retaining lip should be inspected for damage or deformation that prevents proper engagement with the cab floor.
During shift mechanism service, the dust cover should be examined and replaced if any damage is found. The modest cost of the cover is negligible compared to shift linkage corrosion or interior damage.
The DZ96319240354 cover is specifically dimensioned for the Shacman X5000 cab floor shift lever opening, with flange geometry matching the factory penetration dimensions exactly.
Fleet workshops should maintain spare lower dust covers for replacement when shift mechanism service reveals torn or missing seals, ensuring continued cab environment protection and shift mechanism longevity.
Aftermarket dust covers with incorrect dimensions or inferior materials may not seal properly. We supply only the authentic Shacman X5000 Lower Dust Cover DZ96319240354 built to OEM specifications.
Each cover is individually packaged to protect the sealing flange. The part number DZ96319240354 is clearly printed on the packaging for immediate identification and verification.
Our international logistics network ensures genuine DZ96319240354 lower dust covers are available for dispatch to dealerships and fleet maintenance facilities worldwide.
Single lower dust cover with integrated mounting flange. Ready for push‑fit installation into the cab floor shift lever opening.
Expert guidance on dust cover installation and shift mechanism sealing. We help ensure your DZ96319240354 cover provides effective environmental protection.
For current stock availability on the genuine Lower Dust Cover DZ96319240354, please use the contact buttons above.
