Brake Pedal Clip
Зажим Педали Тормоза
Clip del Pedal de Freno
OEM Brake Pedal Clip 81.48235.2080 precision‑formed for the Shacman X5000 pedal mechanism. This small but essential 81.48235.2080 fastener secures clevis pins, pivot shafts, and linkage connections within the brake pedal assembly.
Manufactured from spring steel with corrosion‑resistant plating, the Brake Pedal Clip 81.48235.2080 maintains its retention force through millions of pedal cycles without loosening from vibration or fatigue.
Replacing a missing or deformed clip with the genuine 81.48235.2080 component prevents the linkage disconnection that would cause complete brake system failure.
| Parameter | Specification |
|---|---|
| OEM Part Number | 81.48235.2080 |
| Product Name | Brake Pedal Clip |
| Brand / Model | Shacman X5000 |
| Material | Spring Steel with Zinc Electroplating |
| Clip Type | Retaining clip for clevis pin and pivot shaft |
| Shaft Diameter Range | 8.00 mm to 12.00 mm |
| Retention Force | ≥ 200 N push‑off resistance |
| Corrosion Protection | Zinc electroplating, 96 hours salt spray rated |
| Service Temperature | -40°C to +120°C |
| Application | Shacman X5000 brake pedal linkage retention |
The 81.48235.2080 brake pedal clip may be small in size, but its function is absolutely critical to vehicle safety. It secures the clevis pin that connects the brake pedal to the master cylinder push rod.
If this clip fails or falls out, the clevis pin can work its way out of the connection, causing complete separation of the brake pedal from the hydraulic system and total loss of braking capability.
The Brake Pedal Clip 81.48235.2080 is manufactured from spring steel that maintains its grip on the grooved pin or shaft, resisting the vibration and cyclic loading that could dislodge an ordinary retaining clip.
The 81.48235.2080 clip is manufactured from heat‑treated spring steel that provides the elasticity to grip securely while resisting permanent deformation during installation and removal cycles.
The zinc electroplating provides sacrificial corrosion protection that prevents rust formation, ensuring the clip retains its mechanical properties and remains visually inspectable throughout its service life.
The 81.48235.2080 clip is installed by aligning it with the groove on the clevis pin or shaft and pressing firmly until it snaps into place. A positive click confirms proper engagement.
During pedal mechanism inspection, the clip should be visually checked for presence and proper seating. A deformed or corroded clip must be replaced immediately to maintain brake system integrity.
Each production batch of 81.48235.2080 clips undergoes dimensional verification and push‑off force testing to ensure the retention strength meets the minimum specification for secure fastening.
The spring steel material is tested for hardness and temper to ensure it provides the correct balance of elasticity and strength for reliable long‑term retention performance.
A deformed or spread 81.48235.2080 clip that no longer grips the shaft tightly has lost its retention capability. Rust staining indicates the zinc plating has been compromised.
A missing clip is a critical safety defect that must be corrected immediately before the vehicle is operated. The clevis pin can disengage rapidly without the clip in position.
During any brake system service, all retaining clips should be inspected and replaced if any doubt exists about their condition. The minimal cost of a new clip is negligible compared to brake failure.
The 81.48235.2080 clip is dimensioned for the specific clevis pin and shaft diameters used in the Shacman X5000 brake pedal linkage, matching factory specifications exactly.
Fleet workshops should maintain ample stock of these safety‑critical clips and mandate replacement whenever brake pedal linkage is disassembled for any service procedure.
Aftermarket clips with incorrect dimensions or inferior spring tension can fail in service. We supply only the authentic Shacman X5000 Brake Pedal Clip 81.48235.2080 built to OEM specifications.
Clips are packaged in protective quantities suitable for workshop use. The part number 81.48235.2080 is clearly printed on the packaging for immediate identification.
Our international logistics network ensures genuine 81.48235.2080 brake pedal clips are available for dispatch to dealerships and fleet facilities worldwide.
Multi‑pack of brake pedal retaining clips. Zinc‑plated for corrosion protection during storage until installation.
Expert guidance on clip installation and brake linkage inspection. We help ensure your 81.48235.2080 clips provide secure critical retention.
For current stock availability on the genuine Brake Pedal Clip 81.48235.2080, please use the contact buttons above.
