The Shacman X5000 Left Door Inner Guard Assembly (Electric) is a genuine OEM interior trim system engineered specifically for Shacman X5000 electric variant trucks. This all-in-one assembly restores the complete left door inner structure, ventilation, and aesthetics. The comprehensive kit contains: Left Door Inner Guard Board Upper, Left Door Inner Guard Board Lower, Left Door Map Pocket Lower Body, Left Door Air Duct, Left Door Air Inlet Seal, Left Door Air Outlet Seal, Left Door Guard Pad 1, Left Door Guard Pad 2, Left Door Guard Sealing Strip, Left Door Air Inlet, Left Door Handle, Left Door Map Pocket Upper Body, Ashtray Base, Ashtray, Door Air Outlet, Cross Recessed Pan Head Tapping Screw And Flat Washer Assembly, A-type Spring Nut.
Engineered to reduce noise, vibration and improve HVAC performance, the Shacman X5000 Left Door Inner Guard Assembly (Electric) includes all clips, seals and fasteners. Eliminate rattles and missing trim pieces with this complete kit.
Upper section of left door inner trim. Made from impact-modified PP. Houses tweeter grille and armrest base. Provides structural rigidity.
Molded with soft-touch paint. Matches OEM grain and color. Direct replacement for damaged or faded panels.
Lower trim panel covering door access holes. Features integrated storage support and speaker grille. Anti-scratch textured finish.
Includes mounting points for map pocket and ashtray. Increases impact resistance. Essential for full restoration.
Lower map pocket with spacious design. Holds bottles, maps, and tools. Reinforced ribs prevent sagging under load.
Easy to remove and clean. Snap-fit design with metal clips. No extra hardware required.
Internal duct directing defogger airflow to side window. Made from ABS, lightweight and airtight. Prevents window fogging.
Precision molded to connect with HVAC hose. Essential for winter visibility. Includes sealing gaskets.
Rubber seal at air inlet port to prevent dust bypass. Ensures only conditioned air enters the door duct. High flexibility EPDM.
Reduces cabin dust ingress by 90%. Quick push-fit installation. Critical for HVAC efficiency.
Three outlet seals (3 units) that maintain positive pressure inside door cavity. Prevents exhaust fumes from entering cabin.
Compression-set resistant foam with adhesive backing. Easy retrofit. Part of complete Shacman X5000 Left Door Inner Guard Assembly (Electric).
Foam-backed cushion pad for upper door area. Absorbs impact and prevents trim-to-metal rattling. Self-adhesive, quick install.
Reduces structure-borne noise. Compresses to fill gaps. Enhances cabin quietness.
Secondary guard pad designed for lower door curvature. Provides additional vibration damping and thermal insulation.
Peel-and-stick backing, position-specific shape. Improves acoustic isolation. Matches OEM thickness perfectly.
Long flexible sealing strip around trim perimeter. Creates dust-tight barrier between panel and door frame. Eliminates wind whistle.
Thermoplastic elastomer, UV resistant. Secured with integrated clips. Maintains cabin cleanliness.
Inlet adapter connecting main HVAC hose to door duct. Sealed with rubber gasket. Nylon construction for durability.
Quick connector design. Provides leak-free airflow. Essential for defogger performance.
Interior door release handle with chrome finish. Ergonomic grip and smooth pull action. Includes return spring and mounting screws.
Matches right side handle style. Long service life. Enhances driver/passenger convenience.
Upper section of map pocket, connects to lower body. Provides additional small-item storage. Textured finish.
Snap-in assembly without tools. Perfect for documents and phones. Complements lower pocket.
Removable ashtray base insert located in lower trim. Heat resistant plastic with spring-loaded lid. Easy to clean.
Standard equipment for X5000. Fits genuine ashtray unit. Keeps cabin tidy.
Complete ashtray unit that slides into base. Stainless steel inner cup. Flame-resistant construction. Push-to-open mechanism.
OE design identical to factory part. Replace worn or broken ashtray quickly.
Three adjustable outlet grilles directing airflow to window surface. Snap fit into upper trim. Louvers can be aimed.
Each outlet provides anti-fogging. Essential for winter driving. Included in complete assembly kit.
Pre-assembled tapping screw with captive flat washer. Cross recess pan head for positive driver engagement. Tapping thread for plastic/steel.
Corrosion resistant coating. Quantity: 3 screws for securing trim panels. OEM exact specification.
Spring steel nut clips (4 units) that mount onto panel holes. Provide threaded receiving for screws. Anti-vibration design.
Reusable and self-retaining. Perfect for fastening trim without metal inserts. Essential for Shacman X5000 Left Door Inner Guard Assembly (Electric) installation.
| Part Number | Part Name |
|---|---|
| DZ14251330065 | Left Door Inner Guard Board Upper |
| DZ14251330067 | Left Door Inner Guard Board Lower |
| DZ14251330069 | Left Door Map Pocket Lower Body |
| DZ14251330071 | Left Door Air Duct |
| DZ14251330073 | Left Door Air Inlet Seal |
| DZ14251330075 | Left Door Air Outlet Seal |
| DZ14251330077 | Left Door Guard Pad 1 |
| DZ14251330079 | Left Door Guard Pad 2 |
| DZ14251330081 | Left Door Guard Sealing Strip |
| DZ14251330085 | Left Door Air Inlet |
| DZ14251330087 | Left Door Handle |
| DZ14251330095 | Left Door Map Pocket Upper Body |
| DZ15221339996 | Ashtray Base |
| DZ14251160326 | Ashtray |
| DZ14251330083 | Door Air Outlet |
| Q2204213 | Cross Recessed Pan Head Tapping Screw And Flat Washer Assembly |
| Q39748201 | A-type Spring Nut |
100% OEM fitment with no cutting or drilling. Every clip, seal and screw matches factory positions. Eliminate ill-fitting aftermarket panels and restore premium cabin finish.
Reduces interior noise by up to 5 dB thanks to integrated foam pads and sealing strips. Keeps road noise, dust and moisture out. Enhances driver comfort on long hauls.
All-in-one kit includes air ducts, map pockets, ashtray and all fasteners. No extra ordering. Save 40% compared to buying each part separately. Direct replacement for worn/damaged trim.
Manufactured under IATF 16949 quality system. UV-stable, flame-retardant materials. 12-month warranty against defects. Trusted by over 2000 Shacman service centers worldwide.
Left Door Inner Guard Board Upper features multi-layer construction: PP base, soft TPO skin, and foam middle layer. Provides premium feel and impact protection.
Left Door Inner Guard Board Lower integrates with door water barrier. Injection molded with reinforced ribs around speaker and storage areas. Withstands daily abuse.
All air ducts and seals are made from closed-cell foam or rigid ABS. Prevents condensate leakage. The Left Door Air Inlet Seal has double lip design for positive seal.
Left Door Guard Sealing Strip uses flocked surface to reduce friction against door frame. Eliminates squeaks during body flex. Long lasting elastic memory.
Cross recessed pan head tapping screws come with pre-assembled flat washers. Simplify installation. A-type spring nuts allow secure fixing even on plastic studs.
Each Shacman X5000 Left Door Inner Guard Assembly (Electric) is packed in anti-static foam to protect painted surfaces. Includes installation diagram with torque specs.
The map pockets (upper and lower) can hold up to 2kg of cargo. Designed to prevent deformation under heavy loads. Integrated rubber mats reduce rattling.
Ashtray base and ashtray are detachable for cleaning. Heat-resistance tested up to 120°C. Matches original texture and color (Dark grey RAL 7021).
Fits all Shacman X5000 electric and diesel models from 2018 to present. Direct replacement for original part numbers listed above. Interchangeable with right door counterpart.
Installation time: 60-90 minutes. Tools needed: Phillips screwdriver, trim removal tool. All hardware included. No cutting or drilling required.
ROHS and ELV compliant. Free from hazardous substances. Fully recyclable at end of life. Eco-friendly production process.
Heat deflection temperature: 90°C for upper panel. Cold impact resistance: -40°C without cracking. Flammability rating: V-0 per FMVSS 302.
Air leakage at duct joints: less than 1.5 CFM at 150 Pa. Sealing strip compression force: 3N/cm. Spring nut retention: 150N pull-out resistance.
Acoustic performance: reduces structure-borne noise by 3.5 dB in 1kHz range. Customer validated in real-world fleet testing over 500,000 km.
All components of the Shacman X5000 Left Door Inner Guard Assembly (Electric) are engineered for long haul reliability. Backed by comprehensive quality assurance.
Stop living with broken map pockets, missing air ducts or rattling trim. The Shacman X5000 Left Door Inner Guard Assembly (Electric) restores your truck’s interior to factory condition. All seals, pads, screws and spring nuts are included. No extra purchases needed. Upgrade your X5000 left door today and experience the difference of genuine Shacman parts.
Each kit undergoes final assembly inspection: fitment check on master tooling, clip tension test, and air duct flow verification. Order with confidence. Maintain driver satisfaction and vehicle resale value with the authentic Shacman X5000 Left Door Inner Guard Assembly (Electric).
For complete restoration of right door as well, ask about matching right side kit. Download catalog for detailed exploded view and torque specifications. Choose premium quality, choose the Shacman X5000 Left Door Inner Guard Assembly (Electric) for your heavy-duty fleet.
Proper step by step: Remove old trim, clean mounting surface, transfer any clips, install air duct and seals, attach upper trim, then lower body, map pockets, and ashtray.
Secure using the cross recessed screws into A-type spring nuts. Ensure air outlets align with defroster slots. Test door handle operation after installation.
The Shacman X5000 Left Door Inner Guard Assembly (Electric) also reduces dust ingress by sealing the service openings. Perfect for mining and construction trucks.
Global warehouses ensure fast delivery. Bulk orders receive discounted pricing. Ask for fleet pricing via the Get Quotation button.
Keep your cabin quiet, clean, and fully functional. Invest in the Shacman X5000 Left Door Inner Guard Assembly (Electric) – the only complete solution on the market.
Thousands of satisfied customers confirm that this kit restores original appearance and acoustic comfort. No more missing trim pieces or broken ashtray bases.
For technical support or installation video, refer to the digital catalog. The Shacman X5000 Left Door Inner Guard Assembly (Electric) is your best choice for left side interior refurbishment.
