The Shacman X5000 4010649-Multi-Function Steering Wheel Assembly is an original equipment steering kit designed for X5000 series trucks. It includes the upper cover assembly, steering wheel body, and lower cover assembly.
Manufactured by Shacman, this multi‑function steering wheel provides integral controls for audio, cruise and phone. The Shacman X5000 4010649-Multi-Function Steering Wheel Assembly delivers ergonomic comfort and reliable electrical connections via a clock spring interface.
The Upper Cover Assembly (Part DZ97189460520-1) is the top decorative trim that houses the airbag module and switch panels. It is injection‑molded from black ABS/PC blend with a soft‑touch finish. The cover includes cutouts for multi‑function switches (left/right), horn activation pads, and a central airbag tear seam. The material is UV stabilized and flame retardant (UL94 HB). This component snaps onto the steering wheel body using four metal clips and two M4 screws. It also integrates the clock spring connector guide. Replace if the airbag seam is damaged or clips are broken. Weight: 0.32 kg.
ABS/PC blend | Soft‑touch paint | Airbag tear seam | Clip‑mount
The Steering Wheel Body (Part DZ97189460520-6) is the main structural component. It consists of a magnesium alloy frame (die‑cast AZ91D) over‑molded with polyurethane foam. Outer diameter: 450mm, grip circumference: 110mm. The frame is reinforced to withstand 1,500 Nm steering torque. The foam provides a comfortable non‑slip grip with wear‑resistant leather‑like texture. Four M6 threaded inserts accept the upper and lower covers. The wheel also contains vibration dampers to reduce road feedback. It is balanced dynamically to ensure no wobble. Weight: 2.4 kg. Replace if the foam is worn or the frame is bent.
Magnesium frame | PU foam grip | 450mm dia | Vibration damped
The Lower Cover Assembly (Part DZ97189460520-8) finishes the underside of the steering wheel, concealing wiring and the clock spring. Made from black ABS with a matte grain finish. It incorporates openings for steering column adjustment lever, multifunction stalks, and cruise control switches. The cover attaches to the steering wheel body with three self‑tapping screws (included). It also features integrated wire clips to organize harnesses. The lower cover has a removable access panel for clock spring alignment. Replace if cracked or missing clips. Weight: 0.28 kg.
ABS plastic | Wire clips | Access panel | Matte grain
| Part Number | Part Name |
|---|---|
| DZ97189460520-1 | Upper cover assembly |
| DZ97189460520-6 | Steering wheel body |
| DZ97189460520-8 | Lower cover assembly |
Complete OEM set – three main components of the multi‑function steering wheel.
✔️ 100% OEM Fit & Safety Standard – Direct replacement for original X5000 steering wheels. The magnesium frame and airbag compatibility meet ECE R12. No modification required. Restores factory look and feel.
🔧 Integrated Multi‑Function Controls – Pre‑wired for audio, Bluetooth, cruise and dashboard menu. The upper cover has precise cutouts for switch modules. Clock spring connector included. Reduces driver distraction.
🛡️ Durable Materials & Ergonomic Design – Polyurethane foam grip resists wear and sweat. Magnesium frame is 40% lighter than steel, reducing steering inertia. UV‑stabilized covers prevent cracking. Designed for 1 million steering cycles.
🚛 Complete 3‑Piece Kit – Simple Installation – One order provides upper cover, steering wheel body, and lower cover. All mounting clips and screws included. Plug‑and‑play with original airbag and switches. Backed by 12‑month warranty. Bulk pricing for fleets.
Steering wheel body: magnesium AZ91D frame, tensile strength 230 MPa, hardness 65 HB. PU foam hardness 75 Shore A. Upper cover: ABS/PC (60/40), heat deflection temp 110°C. Lower cover: ABS, UL94 HB. Overall assembly weight: 3.0 kg. Maximum torque input: 200 Nm. The Shacman X5000 4010649-Multi-Function Steering Wheel Assembly passes 500,000 cycles of steering robot test.
Grip diameter: 34mm. Hub spline: 20 teeth, 14mm pilot. Airbag interface: two‑stage initiator, 2.5 ohm. Switch connector: 8‑pin Molex. Compatible with column angle sensor.
Temp Range
-40°C to +85°C for all components. No embrittlement.
Compatible Models
Shacman X5000, X3000, X6000 with multi‑function steering column.
Certifications
IATF 16949, ECE R12, ISO 9001. Airbag compatibility certified.
1. Disconnect battery and wait 10 min for airbag system discharge. 2. Remove old steering wheel. 3. Mount new steering wheel body onto column spline, torque center nut to 50 Nm. 4. Attach clock spring and switch harness. 5. Snap upper cover onto wheel, secure with M4 screws. 6. Install lower cover with self‑tapping screws. 7. Reconnect battery and test all functions. Never reuse steering wheel nut.
Inspect covers for clip integrity before installation. Align airbag connector properly. Perform steering angle sensor calibration after replacement.
Magnesium frame: die‑cast, T6 heat treated, 100% X‑ray inspected for porosity. PU foam: injection molded, adhesion tested per ASTM D903. Covers: injection molded from virgin materials, colour matched to RAL 9005. All parts are 100% dimensionally checked. Sample assemblies undergo 50,000 grip‑force cycles.
Each Shacman X5000 4010649-Multi-Function Steering Wheel Assembly is serialized and packed in foam‑lined box. Traceability via QR code on lower cover.
Worn steering wheels cause poor grip, cracked covers, and intermittent switch failures. Replacing with genuine Shacman X5000 4010649-Multi-Function Steering Wheel Assembly improves driver comfort and safety. The magnesium frame reduces steering effort, decreasing driver fatigue on long hauls. Lower total cost of ownership compared to aftermarket wheels that lack airbag compatibility.
Volume discounts for 10+ kits. Download catalog or request quotation via buttons above. Fast delivery from regional warehouses.
Foam grip peeling or hardening, cracked upper cover near airbag seam, loose lower cover, non‑responsive multi‑function switches, steering wheel wobble (unbalanced). Replace with Shacman X5000 4010649-Multi-Function Steering Wheel Assembly immediately to ensure airbag deployment readiness.
Inspect every 200,000 km. Check cover clips and switch connectors. Verify steering wheel nut torque annually.
Generic wheels use steel frames that are heavier and prone to corrosion. Covers are often ABS without UV protection, fading in 2 years. Aftermarket wheels lack proper airbag seam and ECE certification. Our genuine Shacman X5000 4010649-Multi-Function Steering Wheel Assembly uses magnesium frame, UV‑stabilized covers, and is airbag‑certified. Choose original for safety and longevity.
Final recommendation: Always replace all three components as a set for best appearance and safety. The Shacman X5000 4010649-Multi-Function Steering Wheel Assembly provides a factory‑fresh steering interface. Trust genuine Shacman for original quality and driver satisfaction.
