Shacman X5000 Cab Turnover Shaft Left Support Assembly RHD is a complete OEM mounting kit for the left side cab turnover shaft on right‑hand drive X5000 trucks. This assembly includes the corner piece, U‑guide rail, left bracket, right bracket, U‑shaped reinforcement plate, U‑shaped right reinforcing plate, pin bolt, pin, welding plate, and a fine‑thread hexagon head bolt. The Shacman X5000 Cab Turnover Shaft Left Support Assembly RHD ensures precise alignment, smooth cab tilting, and long‑term structural integrity. Every component is precision manufactured to Shacman’s original equipment standards.
Restore safe and effortless cab access with this genuine support assembly. Perfect for collision repair or preventive maintenance.
Cast steel corner bracket that reinforces the junction between the support and the chassis rail. Powder coated black, includes integrated alignment pins. Direct OEM replacement for RHD cabs.
U-shaped guide rail that directs the turnover shaft during cab tilting. Precision-formed from high-strength steel, zinc plated. Ensures smooth, bind‑free movement of the shaft.
Primary left side mounting bracket for the cab turnover shaft. Heavy gauge steel with rubber bushing sleeve. Powder coated, features elongated holes for fine adjustment.
Right side bracket that works with the left bracket to secure the turnover shaft. Symmetrical design, includes integrated stopper. Galvanized finish, corrosion resistant.
U-shaped reinforcement plate that strengthens the left bracket against torsional loads. 4mm thick steel, welded design. Prevents bracket deformation under heavy use.
Reinforcement plate for the right bracket, mirror of the left plate. Adds rigidity to the entire support assembly. Made from galvanized steel, includes pre‑drilled mounting holes.
High-strength pin bolt that acts as the pivot point for the turnover shaft. M16 thread, hardened steel, zinc plated. Includes grease fitting for lubrication.
Solid steel locating pin that aligns the support assembly to the chassis. Precision ground, case hardened. Prevents lateral movement of the bracket.
Steel welding plate used to attach the corner piece to the frame. Laser cut, 6mm thickness. Provides a strong, permanent bond when welded per instructions.
Fine thread hex head bolt, M12x1.5, property class 10.9. Secures the guide rail to the bracket. Includes corrosion‑resistant coating. One piece supplied.
| Part Number | Part Name |
|---|---|
| 81.41720.2402 | Corner Piece |
| 81.41720.2570 | U-Guide Rail |
| 81.41720.2719 | Left Bracket |
| 81.41720.2722 | Right Bracket |
| 81.41720.2723 | U-Shaped Reinforcement Plate |
| 81.41720.2724 | U-Shaped Right Reinforcing Plate |
| 81.91020.2297 | Pin Bolt |
| 81.91020.2311 | Pin |
| 81.94339.2801 | Welding Plate |
| Q151C1235T1F3 | Hexagon Head Bolt – Fine Thread |
Precision alignment – The Shacman X5000 Cab Turnover Shaft Left Support Assembly RHD includes all brackets and reinforcements to ensure zero slop in the tilting mechanism. Eliminates uneven cab movement.
Heavy‑duty construction – Cast steel corner piece, 4mm reinforcement plates, and hardened pin bolt withstand years of frequent cab tilting. No premature wear.
Rattle‑free design – U‑guide rail and precision pin bolt eliminate metal‑to‑metal noise. The assembly operates silently, even on rough terrain.
Complete kit – Includes every bracket, rail, plate, pin, and bolt. No extra hardware hunting. Direct bolt‑on for RHD X5000 chassis.
Easy installation – All parts are pre‑fitted or clearly marked. Install using standard tools. Welding plate requires professional welding. Torque specs provided.
Long service life – Designed for 500,000km of operation. Pin bolt and guide rail show minimal wear after 10 years. Replacement parts available individually.
Global availability – All 10 part numbers stocked regionally. Fast dispatch for urgent repairs. Technical support available online.
Durability validated – 1000 cab tilt cycles, 200h vibration test, 500h salt spray. No cracking or loosening. OEM certified.
Key dimensions – Corner piece: 160x90x45mm. Guide rail length: 280mm. Pin bolt M16x70. Total assembly weight: 5.8kg.
Sustainability – Steel components fully recyclable. Packaging uses recycled cardboard.
Shacman X5000 Cab Turnover Shaft Left Support Assembly RHD is the only genuine OE solution for the left side cab tilt mechanism on RHD X5000 trucks. Order the complete part set listed above. The Shacman X5000 Cab Turnover Shaft Left Support Assembly RHD restores safe, smooth cab tilting and eliminates wobble. Trust Shacman original parts for unmatched durability and perfect fit.
Each Shacman X5000 Cab Turnover Shaft Left Support Assembly RHD kit includes all 10 components. Available now through authorized Shacman dealers. Upgrade your cab access with genuine quality.
Compatibility: Specifically designed for Shacman X5000 right‑hand drive cabs (all model years). Also fits X3000 RHD with identical chassis dimensions. Verify original part numbers before ordering.
Ordering information: Minimum order 1 kit. Bulk discounts for 5+ kits. Contact your local Shacman parts distributor for fleet pricing.
Service life: Corner piece and brackets last vehicle lifetime. Pin bolt may need replacement after 500,000 km. Guide rail and reinforcement plates reusable indefinitely.
Packaging: Heavy parts in foam-lined carton, small parts in labeled poly bags. Includes exploded diagram and welding instructions.
Authenticity: Look for holographic Shacman genuine label. Counterfeit kits often omit reinforcement plates or use soft pin bolts. Always buy from certified sources.
Customer support: Technical drawings, welding parameters, and torque chart available. Genuine Shacman X5000 Cab Turnover Shaft Left Support Assembly RHD comes with 24‑month warranty.
