Shacman X5000 Assembly Parts is the definitive collection of original equipment fasteners, trim panels, seals, and clips for the X5000 cab. This comprehensive range includes door inner panel blockings, decorative side panels, cross slotted screws, riveted nuts, blanking caps, adhesive tapes, A-pillar trim panels, and dozens of other precision components. The Shacman X5000 Assembly Parts kit ensures every interior and exterior assembly point is restored to factory condition. Perfect for collision repair, full cab restoration, or fleet maintenance.
Each part is manufactured to Shacman’s exacting specifications, guaranteeing fit, finish, and longevity.
Plastic plug for door inner panel holes, 35mm diameter. Seals access holes against dust and moisture. Push-fit design, reusable.
Left side interior decorative panel. Textured ABS, color-matched. Covers wiring and provides finished look. Includes mounting bosses.
Cross-slotted pan head screw with captive washer. Used for trim and panel attachment. Prevents washer loss. Zinc-plated.
PVC blanking plug, 25mm diameter. Seals unused holes in firewall or floor pan. Flexible material, snap-in retention.
Nylon push-type trim clip (14 pcs). Secures door panels and side trims. Reusable, vibration-damping. 8mm hole size.
Self-tapping screw with integrated flat washer. For plastic and sheet metal. Cross recess drive, zinc finish. Various lengths.
Left A-pillar trim for JD/19 cab version. Covered with fabric or vinyl. Includes clip mounts. Direct OEM replacement.
Hex body rivet nut, M6 thread x 21mm. Steel, 8-ST strength. For blind mounting in sheet metal. Creates threaded hole.
Right side wall trim panel, mirror of left side. Covers insulation and wiring. Lightweight, easy to remove for service.
EPDM rubber sealing strip for roof-to-side panel joint. Prevents water ingress and wind noise. Push-on installation.
Polyethylene plug, 8.3×11-13mm. Seals small holes in interior trim. Black, low-profile. Snap-in.
Blanking cap for 11mm holes. Used on dashboard and trim. Push fit, flexible wings. UV-stabilized.
General purpose blanking cap (no size spec). Covers unused switch holes. Matches interior texture.
M6 rivet nut, 13mm length, QST36.6 material, A3A coating. For thin-walled sections. High pull-out resistance.
Cloth-backed adhesive tape, 50x90mm. Seals large irregular holes. Resists moisture and abrasion. Peel-and-stick.
Vinyl sticker, 30mm diameter. Seals small holes against dust. Easy to apply, removable. Black or body color.
M8 rivet nut, 15.5mm length, steel. For heavy-duty blind fastening. Used for seat belt or bracket mounts.
Butyl rubber tape, non-hardening. Seams and joints seal. Remains flexible. Ideal for HVAC and firewall.
All-metal hex lock nut, prevailing torque type. Resists loosening under vibration. Galvanized. M10 size typical.
PVC plug, 38mm diameter, PAL9011 color. For floor pan holes. Weather-resistant, snap-in.
Cross beam for height valve mounting. Steel weldment. Powder coated. Includes brackets and isolators.
Right-hand drive wiper motor cover trim. Fits over wiper linkage. Acoustic foam backing. Reduces noise.
Lower windshield interior trim. Covers defroster duct and wiring. Snap clips included. Matches dashboard grain.
Cloth tape, 40mm diameter round patches. Seals large round holes. Adhesive backing, high tack.
Steel connecting plate for structural joints. Zinc plated. Used in door or frame assembly. Pre-drilled holes.
Elongated plastic blockage for slots or elongated holes. Snap fit, flexible. Seals against dust.
Aluminum alloy shim, 11x50x15mm. For adjusting gaps in door or frame. Corrosion resistant.
Plastic spacing block, 2 pieces. Creates consistent gap between panels. Push-in mounting.
M8 rivet nut, 28.7mm length, with PUR coating. For high-strength blind fastening. Corrosion protected.
Standard flat washer, M10 size. Hardened steel, zinc plated. Distributes bolt load.
Right A-pillar interior trim. Matches left side. Includes clip holes and acoustic padding.
| Part Number | Part Name |
|---|---|
| DZ14251970050 | Door Inner Panel Blocking Φ35 |
| DZ14251971011 | Left Side Panel Decorative |
| Q230B0620F60 | Cross Slotted Screw And Washer |
| DZ14251970023 | PVC Blockage Φ25 |
| DZ14251970009 | Plastic Clip |
| Q221B4216F60 | Cross Recessed Pan Head Tapping Screw And Flat Washer Assembly |
| DZ14251110561 | Left A-Pillar Trim Panel Assembly/JD/19 Model |
| 06.13169.0010 | Hexagon Rivet Nut/M6X21, 8-ST |
| DZ14251971012 | Right Side Wall Decorative |
| DZ14251970045 | Upper Sealing Strip |
| 81.96002.0142 | Plug/8.3*11-13-PE-SW |
| DZ14251970035 | Blanking Cap/Φ 11 |
| DZ14251970025 | Blanking Cap |
| 06.13169.0012 | Riveted Nut/AM6*13-QST36.6-A3A |
| DZ14251970028 | Cloth Base Blocking Tape 50×90 |
| DZ14251970051 | Blocking Sticker Φ Thirty |
| 06.13169.0013 | Riveted Nut/M8*15.5-ST |
| DZ14251970026 | Butyl Adhesive Blocking Tape |
| Q33210T2F3 | 2 Type All Metal Hexagonal Lock |
| 81.96002.0308 | Plug/B38-PVC-PAL9011 |
| DZ13241970006 | Cross Beam Assembly/Height Valve |
| DZ14251111553 | Wiper Cover Trim Panel/X5000/RHD |
| DZ14251970018 | Front Windshield Lower Trim Panel |
| DZ14251970027 | Cloth Base Blocking Tape Φ Forty |
| DZ142519700?? | Connecting Plate |
| 81.96410.0502 | Long Blockage |
| 81.90714.0349 | Shim 11 * 50 * 15-Alcumgpb37 |
| DZ15221433015 | Spacing Block |
| Q230B0616F60 | Cross Slotted Screw And Washer |
| 06.13169.0011 | Riveted Nut/AM8*28.7-ST/PUR-A3R |
| Q401B10 | Flat Washer |
| DZ14251110562 | Right A-Pillar Trim Panel |
Complete vehicle coverage – From A-pillar trims to sealing plugs, every fastener and clip is included. The Shacman X5000 Assembly Parts range supports full cab rebuilds.
OEM corrosion protection – All metal fasteners are zinc-plated or galvanized. Pass 500h salt spray. No premature rust.
Rattle elimination – Plastic clips and foam-backed trim panels prevent squeaks and rattles. Restore factory-quiet interior.
Easy installation – Every part is designed for simple snap-fit or screw attachment. No special tools needed. Complete hardware kit.
Precision fit – All dimensions match factory drawings. No trimming or modifications. Guaranteed interchangeability.
Service-friendly – Clips and screws are reusable. Tapes remove cleanly. Rivet nuts can be replaced without welding.
Global availability – All 30+ part numbers stocked regionally. Rapid dispatch for urgent repairs.
Durability validated – 100,000km road test, 2000h vibration test. No loosening or seal failure. OEM certified.
Dimensions summary – Plugs: Φ11-Φ40mm. Rivet nuts: M6-M8. Screws: M4-M6. Trim panels: various sizes up to 1.2m.
Eco-friendly – Recyclable plastics and metals. Low-VOC adhesives. Reduced packaging waste.
Shacman X5000 Assembly Parts is the only genuine source for every clip, screw, trim panel, and seal in your X5000 cab. Order any part number listed above. The Shacman X5000 Assembly Parts range ensures perfect restoration of factory fit and finish. Trust Shacman original parts for long-term reliability.
Each Shacman X5000 Assembly Parts component is available individually or as a full kit. Contact your authorized Shacman dealer for bulk ordering. Upgrade your cab with genuine quality.
Compatibility: All parts fit Shacman X5000 models (2018+, RHD/LHD, sleeper/day cab). Some parts also fit X3000 variants; check cross-reference.
Ordering information: Minimum order 1 piece per part number. Bulk discounts for fleet quantities. Contact local distributor for pricing.
Service life: Metal fasteners: vehicle lifetime. Plastic clips: 10+ years. Adhesive tapes: 5-7 years. Replacement parts always available.
Packaging: Each part individually labeled in poly bag or box. Bulk packaging for large orders. Includes installation QR code.
Authenticity: Look for holographic Shacman genuine label. Counterfeit parts may cause fitment issues. Always buy from certified sources.
Customer support: Technical drawings and torque specs available. Genuine Shacman X5000 Assembly Parts come with 12‑24 month warranty depending on component.
