The Shacman X5000 Sun Shade Lamp is a complete original equipment cab roof marker light kit designed for X5000 series trucks. It includes the left side marker light, right side marker light, type 1 hex nuts, and flat washers. This assembly enhances vehicle visibility, especially in low light and adverse weather. The Shacman X5000 Sun Shade Lamp ensures a perfect fit on the sun visor or cab roof, meeting ECE R48 lighting regulations and providing a distinctive, safety‑enhancing presence on the road.
The Left Side Marker Light (Part DZ97189721210) is a high‑visibility amber LED marker lamp designed for the left side of the sun shade or cab roof. The housing is made of UV‑stabilised ABS plastic with a black matte finish. The lens is polycarbonate, ultrasonically welded to prevent moisture ingress. The lamp uses four 0.5W red or amber LEDs (depending on market) that produce 30 lumens of light with a 120° viewing angle. Operating voltage: 12V/24V DC with built‑in overvoltage protection. It features a Deutsch DT‑2P sealed connector with a 200mm pigtail.
Amber LED | 30 lm | IP67 | Deutsch connector | UV‑stable
The Right Side Marker Light (Part DZ97189721220) is the mirror‑image counterpart for the right side of the sun visor. It has identical electrical and optical specifications: four 0.5W LEDs, 30 lm output, 120° spread, 12/24V operation, and IP67 sealing. The housing is symmetric to fit the right side mounting position, with a reversed angle on the base to match the cab roof contour. It includes the same Deutsch DT‑2P connector and 200mm flying lead.
30 lm | 2W power | E‑marked | Micro‑prism lens | 200mm pigtail
The Type 1 Hex Nut (Part Q340B06F60) is a standard M6 hex nut, property class 8, with zinc‑nickel coating (480h salt spray resistance). It has a hex height of 5mm and width across flats of 10mm. The nut is used to secure the side marker lamps to the sun shade bracket or cab roof. Torque specification: 8 Nm. Two nuts are supplied for each lamp (total 4 in the kit). The nut features a prevailing torque nylon insert (blue) that prevents loosening under vibration. It is single‑use only – replace with new nuts if removed. The zinc‑nickel coating ensures no red rust after 500 hours of salt fog testing. Compatible with M6x1.0 thread studs of the marker lights.
M6 | Class 8 | ZnNi coated | Nylon insert | 8 Nm torque
The Flat Washer (Part Q401B06) is a hardened steel washer for M6 bolts/screws, with an inner diameter of 6.4mm, outer diameter of 14mm, and thickness of 1.6mm. Material: carbon steel grade 8, zinc‑nickel plated (480h salt spray). Hardness HV 200‑250. Two washers are supplied per kit (quantity 2, but repeated as 2 per nut? actually 2 total). The washer is placed under the hex nut to distribute clamping load evenly over the plastic lamp housing, preventing stress cracks. It also acts as a bearing surface to reduce the risk of the nut loosening. Replace if the washer is bent or corroded. Always use a new washer when replacing the lamp – reuse may reduce clamping effectiveness.
6.4x14x1.6mm | Hardened steel | ZnNi coated | Load distribution
| Part Number | Part Name |
|---|---|
| DZ97189721210 | Left Side Marker Light |
| DZ97189721220 | Right Side Marker Light |
| Q340B06F60 | Type 1 Hex Nut |
| Q401B06 | Flat Washer |
Complete OEM kit – left/right lamps plus 4 nuts and 2 washers (quantity as per original).
✔️ 100% OEM Fit & Approval – Both side marker lights are manufactured to original Shacman tooling and light distribution patterns. They mount directly onto the sun shade or cab roof without modifications. E‑marked and meet ECE R91 clearance lamp requirements for commercial vehicles.
🔧 LED Technology – Brighter, Longer Life – The half‑watt LEDs produce 30 lumens per lamp with only 2W power consumption – 90% less than incandescent bulbs. Lifespan exceeds 50,000 hours, eliminating frequent bulb changes. Instant‑on response improves safety.
🛡️ Weatherproof & Vibration Resistant – Lamps are sealed to IP67, waterproof and dustproof. UV‑stabilised polycarbonate lens will not yellow. Rubber mounting gasket and locking nuts with nylon inserts withstand continuous vibration. Operating range -40°C to +80°C.
🚛 Complete Kit – Everything Included – This kit supplies both left and right marker lights plus all necessary hex nuts and flat washers. No extra hardware to buy. 12‑month unlimited‑mileage warranty. Bulk pricing for fleet operators. Restores cab roof lighting to original safety standard.
Left/Right lamp: dimensions 100x40x30mm, lens colour amber (clear for white version optional). LED type: 4x SMD5050, colour temperature 3000K (amber). Light output: 30 lm per lamp. Viewing angle: 120° horizontal, 80° vertical. Input voltage: 9‑32V DC, protected against reverse polarity and voltage spikes up to 100V. Current draw: 0.08A at 24V, 0.17A at 12V. Connector: Deutsch DT04‑2P. Material: housing ABS+PC, lens PMMA. The Shacman X5000 Sun Shade Lamp set is tested to 1000 hours of salt spray and 50 hours of vibration at 10g RMS.
Temp Range
-40°C to +80°C operational. Storage -50°C to +100°C.
Applications
Shacman X5000, X3000, F3000 sun shade or cab roof marker positions. Also suitable for trailers and bodywork.
Certifications
ECE R91, ECE R48, IP67, RoHS. Fasteners IATF 16949 certified.
1. Disconnect battery. Remove old lamps. 2. Clean mounting surface. 3. Place the rubber gasket onto the lamp base. 4. Insert lamp studs through sun shade holes. 5. From inside cab, place flat washer then hex nut onto each stud. Torque to 8 Nm. 6. Connect Deutsch plug, ensuring seal clicks. 7. Test lights. Re‑check nut torque after 500 km. Do not overtighten – may crack lamp housing. For LED failure, replace entire lamp. Use dielectric grease on connector pins.
Housing: ABS plastic with UV stabiliser, UL94‑V0 rating. Lens: Polycarbonate, hardcoated, UV stable. LEDs: Osram or Samsung, reflow soldered. Circuit board: FR‑4, 1.6mm, conformal coated. Fasteners: 10B21 steel, ZnNi plated, thread locking patch. Every lamp undergoes 15‑minute water spray test and 24‑hour burn‑in. Nuts are torque‑retention verified. Each kit is packed in a sealed bag with silica gel and QR code.
Worn or broken sun shade lamps not only reduce visibility but can lead to fines during roadside inspections. Replacing with genuine Shacman X5000 Sun Shade Lamp restores proper clearance marking. The long‑lasting LED technology reduces maintenance intervals – you will likely never replace a bulb again. Lower electrical load saves alternator wear and fuel. Volume discounts for 5+ kits. Download catalog or request quotation via buttons above. Express shipping from regional centers.
Cracked or yellowed lens, intermittent lighting, water inside lamp, corroded connector pins, loose fit due to missing nuts/washers. Replace immediately with Shacman X5000 Sun Shade Lamp kit. Inspect every 100,000 km – re‑torque nuts and clean connectors.
Generic Shacman X5000 Sun Shade Lamp roof marker lights often use low‑brightness LEDs that are not E‑marked, causing glare or insufficient output. Housings degrade in sunlight after 12 months. Aftermarket nuts are plain steel that rust and seize. Our genuine Shacman X5000 Sun Shade Lamp uses certified E‑mark optics, UV‑stable materials, and corrosion‑resistant fasteners. Choose original for safety, legality and durability.
Final recommendation: Always replace both side marker lights as a pair for balanced appearance and light output. The Shacman X5000 Sun Shade Lamp kit provides a complete OEM solution for cab roof or sun visor illumination. Trust Shacman for genuine quality and road safety.
