Connectors
Соединители
Conectores Hidráulicos
OEM Connectors 81.48235.2083 precision‑manufactured for the Shacman X5000 hydraulic clutch and brake systems. These essential 81.48235.2083 fittings provide secure, leak‑free junctions between rigid lines and flexible hoses.
Machined from high‑grade steel with corrosion‑resistant plating, the Connectors 81.48235.2083 maintain hydraulic integrity under the high pressures and temperature extremes of commercial vehicle operation.
Replacing a damaged or corroded connector with the genuine 81.48235.2083 component restores proper system sealing and prevents the fluid loss that compromises braking and clutch performance.
| Parameter | Specification |
|---|---|
| OEM Part Number | 81.48235.2083 |
| Product Name | Connectors |
| Brand / Model | Shacman X5000 |
| Material | High‑Grade Steel with Zinc‑Nickel Electroplating |
| Connector Type | Hydraulic line union and hose barb fittings |
| Thread Specifications | Metric M10 × 1.0 and M12 × 1.0 |
| Operating Pressure Rating | Up to 120 bar working pressure |
| Corrosion Protection | Zinc‑Nickel plating, 600 hours salt spray rated |
| Sealing Method | Tapered seat and O‑ring seal configurations |
| Application | Shacman X5000 clutch and brake hydraulic line connections |
The 81.48235.2083 connectors form the critical junctions in the Shacman X5000 hydraulic clutch and brake systems. They join rigid lines to flexible hoses while maintaining a high‑pressure seal.
Hydraulic systems depend on complete fluid containment to transmit force. A single leaking connector can introduce air into the system, causing a spongy pedal feel and reduced braking or clutch performance.
The Connectors 81.48235.2083 feature precision‑machined threads and sealing surfaces that ensure bubble‑tight connections when properly torqued, maintaining system integrity under all operating conditions.
The 81.48235.2083 connectors are machined from high‑grade steel and finished with zinc‑nickel electroplating, providing superior corrosion resistance compared to standard zinc coatings.
The precision threads and sealing faces are protected by the plating, ensuring that connectors remain serviceable and maintain their sealing capability throughout the vehicle’s service life.
The 81.48235.2083 connectors must be tightened to the specified torque using a flare nut wrench to prevent damage to the fitting hex and ensure proper sealing without over‑compression.
Threads should be clean and free of debris before assembly. The sealing surfaces must be inspected for damage or contamination that could prevent proper fluid sealing under operating pressure.
Each production batch of 81.48235.2083 connectors undergoes dimensional verification of threads and sealing surfaces, along with pressure integrity testing at 1.5 times the rated working pressure.
Plating thickness is verified using X‑ray fluorescence to ensure the zinc‑nickel coating meets the minimum specification for long‑term corrosion protection in the under‑chassis environment.
Fluid seepage or wetness around the 81.48235.2083 connector indicates a compromised seal. Corroded threads may prevent proper tightening or cause the connector to seize during service.
A rounded or damaged hex makes proper torque application impossible. Such connectors must be replaced to ensure the system can be properly serviced and sealed in the future.
During hydraulic system service, all connectors should be inspected for corrosion, thread damage, and signs of leakage. Replacing compromised connectors maintains system safety and reliability.
The 81.48235.2083 connectors are specifically dimensioned with the correct thread sizes and sealing configurations for Shacman X5000 hydraulic systems, matching factory specifications.
Fleet workshops should maintain spare connectors for replacement during hydraulic system repairs, ensuring correct fittings are always available to maintain system integrity.
Aftermarket connectors with incorrect threads or inferior materials can leak under pressure. We supply only the authentic Shacman X5000 Connectors 81.48235.2083 built to OEM specifications.
Connectors are packaged in sealed containers to protect the plating and threads. The part number 81.48235.2083 is clearly printed on the packaging for identification.
Our international logistics network ensures genuine 81.48235.2083 connectors are available for dispatch to dealerships and fleet facilities worldwide.
Complete connector fittings as specified for the application. Protective caps preserve threads and sealing surfaces during transit.
Expert guidance on connector installation and hydraulic system bleeding. We help ensure your 81.48235.2083 connectors provide leak‑free service.
For current stock availability on the genuine Connectors 81.48235.2083, please use the contact buttons above.
