Telescopic Transmission Shaft
Телескопический Вал Трансмиссии
Eje de Transmisión Telescópico
OEM Telescopic Transmission Shaft 6010006-DZ9114312072 precision‑engineered for the Shacman X5000 driveline system. This balanced 6010006-DZ9114312072 assembly transmits torque between the transmission output and the drive axle with reliable power transfer under all conditions.
Constructed from high‑strength alloy steel with hardened splines and precision‑welded yokes, the Telescopic Transmission Shaft 6010006-DZ9114312072 withstands torsional loads and vibration of heavy‑duty commercial operation.
Replacing a bent or worn telescopic transmission shaft with the genuine 6010006-DZ9114312072 component restores proper driveline alignment and prevents the vibration that causes bearing and seal damage.
| Parameter | Specification |
|---|---|
| OEM Part Number | 6010006-DZ9114312072 |
| Product Name | Telescopic Transmission Shaft |
| Brand / Model | Shacman X5000 |
| Material | High‑Strength Alloy Steel, Induction‑Hardened Splines |
| Shaft Type | Sliding splined driveline shaft with welded end yokes |
| Spline Specification | Involute spline at sliding joint end, sealed with boot |
| Surface Hardness | HRC 55‑60 on bearing and spline surfaces |
| Corrosion Protection | Durable protective coating with anti‑corrosion treatment |
| Balancing | Dynamically balanced for smooth high‑speed operation |
| Application | Shacman X5000 transmission to drive axle driveline |
The 6010006-DZ9114312072 telescopic transmission shaft is a critical driveline component that connects the transmission output to the drive axle input. It transmits engine torque through universal joints while accommodating suspension movement and chassis flex.
As the drive axle moves vertically through suspension travel, the shaft’s slip joint accommodates length changes. The balanced design ensures smooth rotation without vibration at highway speeds under all load conditions.
The induction‑hardened splines and precision‑welded yokes resist wear under high‑torque loading, maintaining secure attachment to universal joint assemblies throughout the vehicle’s extended service intervals in demanding commercial operation.
The 6010006-DZ9114312072 shaft is manufactured from high‑strength forged alloy steel with induction‑hardened spline surfaces, providing excellent wear resistance at the critical sliding joint interface for long-term driveline reliability.
The durable protective coating provides corrosion protection while the sealed slip joint boot with internal grease reservoir helps prevent contamination and fretting at the spline connections during high‑torque operation.
The 6010006-DZ9114312072 shaft installs between the transmission and drive axle with universal joint connections. Correct yoke phasing is essential to prevent driveline vibration during high-speed rotation under heavy load conditions.
Mounting bolts are installed with thread locking compound and torqued incrementally to factory specification. Driveline angular alignment should be verified after installation to ensure operating angles at both universal joints are within specification.
Each 6010006-DZ9114312072 shaft undergoes dynamic balancing to minimize vibration at highway speeds. Correction weights are applied as needed to meet the balance grade for heavy‑duty driveline applications in commercial vehicle operation.
Spline fit, weld integrity, and boot sealing are verified during assembly to ensure proper function and structural reliability throughout the demanding duty cycles of commercial vehicle driveline operation across all road conditions.
Driveline vibration that increases with speed indicates the 6010006-DZ9114312072 shaft may be bent, out of balance, or have worn splines causing excessive runout during high‑speed rotation under varying load conditions.
Worn or fretted splines create driveline backlash producing a clunking sound during acceleration or deceleration, requiring shaft inspection and possible replacement to prevent further damage to transmission and axle components.
During driveline service, the shaft should be inspected for straightness, spline condition, universal joint wear, and boot integrity. Damaged shafts must be replaced to maintain driveline reliability and safe vehicle operation at highway speeds.
The 6010006-DZ9114312072 shaft is specifically configured for the Shacman X5000 transmission to drive axle position, with spline dimensions, overall length, and balance specification matching this vehicle platform exactly.
Fleet operators should maintain spare telescopic transmission shafts and universal joint components for prompt replacement when driveline issues are diagnosed, minimizing vehicle downtime from driveline failures during commercial operations.
Aftermarket telescopic shafts with incorrect specifications can cause driveline vibration and component damage. We supply only the authentic Shacman X5000 Telescopic Transmission Shaft 6010006-DZ9114312072 built to exact OEM specifications.
Each shaft is individually packaged with protective coating and yoke guards. The part number 6010006-DZ9114312072 is clearly printed on the packaging for immediate identification and verification at any facility worldwide.
Our international logistics network ensures genuine 6010006-DZ9114312072 telescopic transmission shafts are available for dispatch to dealerships and fleet maintenance facilities worldwide with balance certification provided.
Complete telescopic transmission shaft assembly with welded yokes, hardened splines, sealed slip joint, and dynamic balancing. Ready for driveline installation with appropriate hardware.
Expert guidance on telescopic transmission shaft installation and driveline alignment. We help ensure your 6010006-DZ9114312072 shaft provides smooth torque transmission under all conditions.
For current stock availability on the genuine Telescopic Transmission Shaft 6010006-DZ9114312072, please use the contact buttons above.
