Ejector Pin
Выталкиватель
Pasador Eyector
OEM Ejector Pin DZ95189360037 precision‑ground for the Shacman X5000 mechanical systems. This hardened DZ95189360037 component provides reliable linear force transmission for separation and release mechanisms throughout the vehicle.
Manufactured from high‑strength alloy steel with a precision surface finish, the Ejector Pin DZ95189360037 withstands the impact and sliding wear typical of mechanical actuation in demanding commercial applications.
Replacing a worn or bent ejector pin with the genuine DZ95189360037 component restores proper mechanism function and prevents the binding that causes incomplete actuation cycles.
| Parameter | Specification |
|---|---|
| OEM Part Number | DZ95189360037 |
| Product Name | Ejector Pin |
| Brand / Model | Shacman X5000 |
| Material | High‑Strength Alloy Steel with Nitride Coating |
| Pin Type | Cylindrical ejector with hardened tip |
| Pin Diameter | Approximately 8.00 mm |
| Overall Length | Approximately 65.00 mm |
| Surface Hardness | HRC 56‑60 |
| Surface Finish | Ground and nitride coated |
| Application | Shacman X5000 mechanical release and separation systems |
The DZ95189360037 ejector pin is a precision mechanical component that transmits linear force to separate, release, or eject mating parts in various Shacman X5000 mechanisms and assemblies.
These pins operate under impact and sliding conditions that demand high surface hardness and dimensional accuracy. The nitride coating provides additional wear resistance and corrosion protection.
The Ejector Pin DZ95189360037 is engineered to maintain its straightness and surface integrity through repeated actuation cycles, ensuring consistent mechanism performance without binding or incomplete travel.
The DZ95189360037 pin is manufactured from high‑strength alloy steel and heat‑treated to HRC 56‑60. The nitride coating creates an extremely hard, low‑friction surface layer that resists galling.
This surface treatment also provides excellent corrosion resistance, protecting the pin from the moisture and chemical exposure encountered in chassis‑mounted mechanical assemblies throughout the vehicle’s service life.
The DZ95189360037 ejector pin installs into its guide bore with a close sliding fit. The bore must be clean and free of burrs, and the pin lightly lubricated before insertion.
Proper alignment of the pin with its mating actuator and target component is essential for straight‑line force transmission and to prevent the side loading that causes premature pin or bore wear.
Each production batch of DZ95189360037 pins undergoes dimensional verification including diameter, length, straightness, and surface finish measurement to ensure conformance to specifications.
Hardness testing and nitride coating thickness verification confirm that the pin meets the required mechanical and surface properties for its intended service application.
A bent DZ95189360037 pin will bind in its guide bore, causing sluggish or incomplete mechanism actuation. Scoring or galling on the pin surface indicates inadequate lubrication.
A mushroomed or deformed pin tip indicates excessive impact loading or material fatigue. Damaged pins must be replaced to restore proper mechanism function and prevent damage to mating parts.
During mechanism service, the ejector pin should be inspected for straightness, surface condition, and tip integrity. Replacing worn pins promptly prevents cascading mechanism failures.
The DZ95189360037 ejector pin is specifically dimensioned for designated mechanism locations on the Shacman X5000, matching factory specifications for diameter, length, and material properties.
Fleet workshops should maintain spare ejector pins for replacement during mechanism service, ensuring continued reliable operation of the affected vehicle systems.
Aftermarket ejector pins with incorrect hardness or dimensions can cause mechanism malfunction. We supply only the authentic Shacman X5000 Ejector Pin DZ95189360037 built to OEM specifications.
Each pin is individually packaged with protective coating. The part number DZ95189360037 is clearly printed on the packaging for immediate identification.
Our international logistics network ensures genuine DZ95189360037 ejector pins are available for dispatch to dealerships and fleet facilities worldwide.
Single ejector pin with nitride coating. Protective packaging preserves surface finish until installation.
Expert guidance on ejector pin installation and mechanism alignment. We help ensure your DZ95189360037 pin provides reliable linear actuation.
For current stock availability on the genuine Ejector Pin DZ95189360037, please use the contact buttons above.
