Tubular Crossbeam Assembly
Трубчатая Поперечина
Travesaño Tubular
OEM Tubular Crossbeam Assembly DZ96259510390 precision‑engineered for the Shacman X5000 chassis structure. This lightweight DZ96259510390 cylindrical reinforcement member spans between frame rails, providing torsional rigidity with efficient material use.
Constructed from high‑strength steel tubing with welded end flanges and durable coating, the Tubular Crossbeam Assembly DZ96259510390 withstands the cyclical stresses of heavy‑duty vehicle operation.
Replacing a bent or corroded tubular crossbeam with the genuine DZ96259510390 assembly restores proper chassis alignment and the structural integrity designed by the manufacturer.
| Parameter | Specification |
|---|---|
| OEM Part Number | DZ96259510390 |
| Product Name | Tubular Crossbeam Assembly |
| Brand / Model | Shacman X5000 |
| Material | High‑Strength Steel Tube with Welded End Flanges |
| Tube Outer Diameter | Approximately 60.00 mm |
| Wall Thickness | 4.00 mm |
| Overall Length | Approximately 820.00 mm |
| Flange Bolt Pattern | Multi‑hole pattern, 12.50 mm diameter |
| Corrosion Protection | Black powder coating, 500 hours salt spray rated |
| Application | Shacman X5000 chassis frame lateral reinforcement |
The DZ96259510390 tubular crossbeam assembly connects the left and right chassis frame rails, providing essential lateral stiffness that maintains the precise dimensional relationship between the two longitudinal members.
The tubular design offers an excellent strength‑to‑weight ratio, providing the necessary torsional resistance while contributing less weight to the overall chassis compared to solid or box‑section alternatives.
The Tubular Crossbeam Assembly DZ96259510390 also serves as a routing path for wiring harnesses and air lines, with its cylindrical profile allowing components to be secured along its length.
The DZ96259510390 crossbeam uses high‑strength steel tubing with precision‑welded end flanges. The tubular section provides uniform strength in all bending directions with excellent torsional rigidity.
The welded flange construction ensures robust attachment to the frame rails, distributing loads evenly through multiple fasteners and preventing the stress concentrations that cause fatigue cracking.
The DZ96259510390 assembly bolts to pre‑drilled holes in the chassis frame rails. Bolts must be installed loosely, then tightened progressively after verifying proper frame alignment.
Correct installation requires parallel frame rails at the specified spacing. Forcing the crossbeam into position introduces residual stresses that can lead to premature failure.
Each production batch of DZ96259510390 crossbeams undergoes dimensional verification and weld integrity inspection to ensure flange angles and hole positions conform to specifications.
The welded joints are visually inspected and sampled for non‑destructive testing to verify complete penetration and absence of defects that could compromise structural performance.
Rust staining or bubbling of the powder coating on the DZ96259510390 crossbeam indicates corrosion penetration. If unchecked, this reduces tube wall thickness and structural capacity.
Cracks at the weld junctions or flange bolt holes are evidence of fatigue. A cracked crossbeam must be replaced immediately to prevent frame distortion and component detachment.
During chassis inspections, the crossbeam and mounting hardware should be checked for tightness and condition. Loose bolts allow movement that accelerates wear at the connection points.
The DZ96259510390 crossbeam is specifically configured for the Shacman X5000 frame rail spacing and bolt hole patterns, matching factory‑specified mounting locations exactly.
Fleet operators should maintain spare tubular crossbeams for prompt replacement when collision damage or corrosion compromises the original structural member during service.
Aftermarket crossbeams with inadequate material or incorrect dimensions can compromise chassis integrity. We supply only the authentic Shacman X5000 Tubular Crossbeam Assembly DZ96259510390.
Each assembly is individually packaged with edge protection. The part number DZ96259510390 is clearly displayed on the component and packaging for immediate identification.
Our international logistics network ensures genuine DZ96259510390 tubular crossbeams are available for dispatch to dealerships and fleet facilities worldwide.
Complete tubular crossbeam assembly with welded end flanges and powder coating. Ready for chassis frame installation.
Expert guidance on tubular crossbeam installation and frame alignment. We help ensure your DZ96259510390 assembly provides reliable structural support.
For current stock availability on the genuine Tubular Crossbeam Assembly DZ96259510390, please use the contact buttons above.
