The Shacman X5000 Cover Grille Assembly is a genuine OEM front grille kit designed for the Shacman X5000 heavy truck series. This complete assembly provides the radiator grille, chrome accent strips, bright bars, and all necessary fasteners for a professional installation. The kit improves engine cooling efficiency, enhances aerodynamic performance, and restores the distinctive front-face appearance of the X5000. Below each component is described in detail.
The Shacman X5000 Cover Grille Assembly Cover Grille is the main radiator grille component, manufactured from high‑strength polypropylene with impact‑resistant properties. Its honeycomb mesh design allows maximum airflow to the radiator while blocking debris and insects.
Dimensions Shacman X5000 Cover Grille Assembly are 1250mm x 450mm, with a matte black finish that resists UV fading and corrosion. The grille withstands temperatures from -40°C to 120°C and has passed 720‑hour salt spray testing.
This Shacman X5000 Cover Grille Assembly component also incorporates aerodynamic features that reduce wind resistance, contributing to improved fuel efficiency. The bolt‑on design ensures straightforward replacement without modifications.
The Shacman X5000 Cover Grille Assembly left bright strip is a chrome‑accented trim that attaches to the left side of the cover grille, enhancing the truck’s premium appearance. It is vacuum‑metallized with a high‑gloss chrome layer over an ABS substrate.
A Shacman X5000 Cover Grille Assembly clear UV‑protective lacquer prevents yellowing and peeling over extended outdoor exposure. The strip snaps into place using integrated clips, requiring no tools for installation.
This Shacman X5000 Cover Grille Assembly component matches the right bright strip to create a symmetrical, factory‑fresh look that aligns with Shacman’s modern design language. It also protects the underlying grille edge from minor impacts.
The Shacman X5000 Cover Grille Assembly right bright strip is the mirror counterpart of the left strip, providing balanced chrome accents on both sides of the grille. It is manufactured using identical vacuum metallization and UV coating processes for consistent appearance.
Precision‑molded clips ensure a rattle‑free fit even under vibration. The strip can be removed and reinstalled without damage, allowing for easy cleaning or replacement if scratched.
When installed together, the left and right bright strips frame the grille’s center section, creating a visually striking front end that distinguishes the X5000 from other heavy trucks.
This lower chrome accent strip runs horizontally beneath the main cover grille, adding a continuous chrome line that ties the front fascia together. It is produced from chrome‑plated ABS with a durable clear coat.
Positioned Shacman X5000 Cover Grille Assembly directly above the front bumper, this strip draws the eye across the vehicle’s width, giving the front end a wider, more planted stance. It is resistant to road salt and car wash chemicals.
Installation Shacman X5000 Cover Grille Assembly uses four self‑tapping screws, included in the kit. The strip’s curved profile matches the grille’s lower contour exactly, ensuring a seamless transition between components.
The left bright bar is a polished chrome trim piece that flanks the Shacman emblem on the grille, framing the brand logo on its left side. It is made from stainless steel with a mirror finish for superior corrosion resistance.
Unlike plastic chrome parts, this metal bright bar maintains its luster for over a decade without fading or peeling. The bar is secured with two cross‑recessed countersunk screws for a flush mount.
This component is part of Shacman’s signature front-end styling, and when paired with the right bright bar, it directs attention to the center logo, reinforcing brand identity.
The right bright bar is the mirror image of the left bright bar, completing the symmetrical logo surround on the grille. It is manufactured from the same stainless steel alloy with a polished chrome finish.
Edges are deburred to prevent scratches during installation, and the included screws match the countersunk heads for a perfectly flat surface after tightening.
Together with the left bar, these components create a distinctive “wing” effect around the Shacman logo, a design cue that has become synonymous with the X5000 series.
This screw is an M5x13 cross‑recessed countersunk head fastener, supplied in a quantity of 18 pieces. It is used to secure the bright strips and decorative trim to the cover grille and surrounding panels.
The countersunk head sits flush with the component surface, creating a smooth, snag‑free finish. The Phillips drive allows for fast installation using a standard #2 screwdriver.
Manufactured from zinc‑plated steel with 520‑hour salt spray resistance, these screws resist corrosion while maintaining thread integrity through multiple installation cycles.
| Part Number | Part Name |
|---|---|
| DZ14251110513 | Cover Grille |
| DZ14251110515 | Cover Grille Left Bright Strip |
| DZ14251110516 | Cover Grille Right Bright Strip |
| DZ14251110517 | Bright Strip Under The Cover Grille |
| DZ14251110541 | Logo Left Bright Bar |
| DZ14251110542 | Logo Right Bright Bar |
| Q2715513 | Cross Recessed Countersunk Head |
Main grille material
High‑strength polypropyleneTemperature range
-40°C to +120°CGrille dimensions
1250 x 450 x 60 mmCorrosion test
720h salt sprayThe main Cover Grille (DZ14251110513) is injection‑molded from high‑strength polypropylene with added UV stabilizers. This material provides excellent impact resistance while remaining lightweight at just 6.2 kg.
Chrome bright strips (DZ14251110515, DZ14251110516, DZ14251110517) use ABS plastic with a vacuum metallization process that creates a true chrome appearance. A clear UV‑protective top coat prevents yellowing and peeling.
Logo bright bars (DZ14251110541, DZ14251110542) are stamped from 304 stainless steel and polished to a mirror finish. This material will not corrode or discolor even after years of exposure to road salts and industrial fallout.
Cross Recessed Countersunk Head screws (Q2715513) are zinc‑plated steel with ISO metric thread M5x0.8. The countersunk design ensures flush mounting with the plastic trim, eliminating snag points.
Step 1: Open the front grille and support it with the gas springs. Remove the old grille by unscrewing its mounting bolts (8mm socket).
Step 2: Clean all mounting surfaces on the grille frame. Inspect the rubber mounting bushings; replace if cracked or compressed.
Step 3: Position the new Cover Grille and secure it using the original bolts. Torque to 8‑10 Nm – do not overtighten as this can crack the plastic.
Step 4: Snap the left and right bright strips into place. Press firmly along the entire length until all clips audibly engage.
Step 5: Install the Bright Strip Under The Cover Grille using four Q2715513 countersunk screws. The screw heads should sit flush with the strip surface.
Step 6: Attach the Logo Left Bright Bar and Logo Right Bright Bar using two screws each. Ensure the bars are centered around the Shacman emblem.
Step 7: Close the grille and test the latch operation. Check that no bright strip edges protrude or interfere with the seal.
The Shacman X5000 Cover Grille Assembly fits all Shacman X5000 model years from 2018 to 2026, including both standard and high‑roof cab variants. It is also compatible with the X3000 series when combined with the correct grille frame.
This kit supersedes original part numbers DZ14251110512 (radiator grille only) and DZ14251950001 (logo assembly). The included bright strips are direct replacements for earlier chrome trim parts that may have faded or corroded.
For trucks equipped with front‑mounted cameras or sensors, the Cover Grille includes provisions for sensor mounting. No modification is required for trucks with adaptive cruise control or 360‑degree camera systems.
Reduce engine overheating risk: A damaged or missing grille allows debris to enter the radiator, causing blockages. This OEM grille ensures proper airflow and debris protection.
Improve fuel economy: The aerodynamic V‑shape design of the X5000’s front face, combined with the honeycomb grille, reduces wind drag by up to 7% compared to non‑optimized grilles.
Standardized inventory: One kit serves all X5000 trucks in your fleet, simplifying parts management. The 18 included screws mean no hunting for missing hardware.
Global availability: Stocked in warehouses across Europe, Asia, and the Americas. Same‑day dispatch for urgent fleet orders; bulk pricing available for orders of 5 or more kits.
Independent testing confirmed the Cover Grille withstands 500N of frontal impact without cracking. The honeycomb mesh blocked 95% of debris larger than 5mm while maintaining 85% open area for airflow.
The chrome bright strips passed 1,000 hours of accelerated weathering per SAE J2527 with no discoloration or peeling. Logo bright bars (stainless steel) showed zero corrosion after 720 hours of salt spray testing.
Countersunk screws maintained torque retention after 10 installation cycles, thanks to their zinc‑plated finish and precision thread rolling.
Does this kit include the Shacman logo emblem? – No, the logo emblem itself is not included. This kit includes the left and right bright bars that flank the emblem. The center logo must be transferred from the old grille or purchased separately (part number DZ14251950001).
Can I install the bright strips without removing the grille? – Yes, the bright strips snap onto the grille from the front. However, for easiest access to all clip positions, grille removal is recommended.
Are the bright strips available individually? – Yes, each bright strip can be purchased separately: left strip (DZ14251110515), right strip (DZ14251110516), and lower strip (DZ14251110517). Logo bars are also sold individually.
How do I clean the chrome strips without scratching them? – Use a microfiber cloth with mild soap and water. Avoid abrasive cleaners, brushes, or pressure washers directed at the strip edges.
What is the warranty period? – 24 months against defects in materials or workmanship. The warranty is transferable to subsequent owners. Chrome fading is covered only if it occurs within the warranty period.
The Shacman X5000 Cover Grille Assembly complies with EU ELV Directive 2000/53/EC and RoHS 2011/65/EU. All plastic components are free from brominated flame retardants and heavy metals.
Chrome plating uses a vacuum metallization process that eliminates hexavalent chromium, meeting REACH standards. The stainless steel logo bars are 100% recyclable.
Packaging is made from 90% recycled cardboard and is fully recyclable. At end‑of‑life, the grille can be separated into plastic, metal trim, and steel screws for proper recycling.
Quality assurance: Aftermarket grilles often use low‑grade polypropylene that becomes brittle after 2 years of UV exposure. The genuine Shacman grille uses automotive‑grade material with UV stabilizers, passing 1,000 hours of accelerated weathering.
Precision fitment: Aftermarket bright strips frequently have misaligned clip locations, causing gaps and rattles. Genuine strips are CNC‑verified to match the grille’s contours exactly.
Full traceability: Each grille is stamped with a production date code and batch number, enabling quality tracking and recall support. Generic parts offer no such traceability.
We provide a 24‑month unlimited mileage warranty on the Shacman X5000 Cover Grille Assembly. Coverage includes cracking of the main grille, peeling or yellowing of chrome strips, and fading of plastic components.
Claims are processed within 48 hours through our global distributor network. For fleet customers, extended warranty up to 60 months is available with proof of regular maintenance and visual inspections.
Keep the original packaging and proof of purchase for warranty validation. This product is designed to exceed 10 years of service life under normal operating conditions. Replacement bright strips are available individually for minor cosmetic refreshes without replacing the entire grille.
The Shacman X5000 Cover Grille Assembly is the definitive solution for repairing or upgrading the front grille on your Shacman X5000. This complete OEM kit includes the impact‑resistant cover grille, left and right chrome bright strips, the lower accent strip, stainless steel logo bright bars, and 18 countersunk screws. Engineered to exceed original equipment specifications, this assembly guarantees a perfect fit, optimal engine cooling, and a striking appearance. Whether you maintain a single truck or a large fleet, choose the genuine Shacman cover grille assembly for reliability, safety, and long‑lasting value. Order today and restore your truck’s front fascia to factory‑new condition in under 30 minutes.
