The Shacman H3000 Connecting Plate is a robust structural component engineered for the heavy-duty chassis of Shacman trucks. It ensures secure mounting and load distribution across critical frame sections.
This connecting plate integrates seamlessly with the Cross Beam Assembly/Regulatory Version/750L/Day/2000, Left Support Assembly /330, and Right Support Assembly /330, providing a stable foundation for auxiliary systems.
Precision fastening is achieved using the Self-Locking Nut, Flat Washer, and Hexagon Head Bolt- Fine Thread, while the Base Plate offers additional reinforcement. The Shacman H3000 Connecting Plate is the central link in this assembly.
The Self-Locking Nut is a critical fastener that incorporates a nylon insert or deformed thread to prevent loosening under vibration. It ensures that connections remain secure even in high-stress chassis applications.
This nut is widely used in conjunction with the Hexagon Head Bolt to create a reliable locking mechanism. Its design eliminates the need for additional locking washers, reducing assembly complexity.
In the Shacman H3000 Connecting Plate assembly, the Self-Locking Nut provides consistent clamping force, ensuring that the cross beam and support brackets stay firmly attached throughout the vehicle’s service life.
This Cross Beam Assembly is a heavy-duty structural member designed for the regulatory version of the chassis, featuring a 750L fuel tank capacity and a day cab configuration with a 2000 mm width. It provides lateral rigidity and supports the mounting of various chassis components.
The assembly is fabricated from high-strength steel and precision-welded to withstand torsional loads. It interfaces directly with the Shacman H3000 Connecting Plate to transfer forces between the frame rails.
Its regulatory compliance ensures that the vehicle meets safety and emission standards, while the robust construction guarantees durability in demanding operational conditions.
The Left Support Assembly /330 is a dedicated bracket that attaches to the left side of the chassis frame. It is designed to accommodate specific auxiliaries such as air tanks or fuel filter modules, with a mounting pitch of 330 mm.
This support is manufactured from stamped steel with reinforced ribbing to enhance stiffness. It connects to the Shacman H3000 Connecting Plate via the Hexagon Head Bolt and Self-Locking Nut, ensuring a vibration-proof joint.
The assembly is corrosion-protected with a zinc-plated finish, providing long-term durability even in salt-spray environments.
The Flat Washer is a simple yet indispensable component that distributes the load of the fastener over a larger surface area. This prevents damage to the mating parts and reduces the risk of loosening due to embedding.
In the Shacman H3000 Connecting Plate system, flat washers are used beneath both the bolt heads and nuts to ensure uniform pressure distribution. They also act as a bearing surface to minimize fretting corrosion.
Made from hardened steel with a galvanized coating, the Flat Washer offers excellent resistance to wear and environmental corrosion.
Symmetrical to its left counterpart, the Right Support Assembly /330 provides identical mounting provisions on the right side of the chassis. It is designed to accommodate components such as the exhaust aftertreatment system or battery box.
Like the left support, it uses the same 330 mm pitch and is attached using the same fastener set. The Shacman H3000 Connecting Plate serves as the central bridge between these two supports and the cross beam.
Its robust construction and protective coating ensure reliable performance under heavy loads and harsh operating conditions.
The Hexagon Head Bolt- Fine Thread is a high-strength fastener with a fine pitch thread, offering greater clamping force and resistance to loosening compared to coarse threads. It is ideal for precision assemblies where vibration is prevalent.
This bolt is paired with the Self-Locking Nut and Flat Washer to secure the cross beam and support assemblies to the Shacman H3000 Connecting Plate. The fine thread allows for more precise torque adjustment.
Manufactured from alloy steel with a protective coating, this bolt provides excellent tensile strength and fatigue resistance, ensuring the integrity of the joint over the vehicle’s lifetime.
The Base Plate is a flat, reinforced plate that serves as the foundation for mounting various chassis accessories. It is typically located at the lower section of the connecting plate assembly, providing a sturdy platform for brackets and components.
In the Shacman H3000 Connecting Plate system, the Base Plate adds extra rigidity and distributes vertical loads evenly across the frame. It also includes pre-drilled holes for accessory attachment.
Manufactured from high-tensile steel with a corrosion-resistant finish, the Base Plate ensures long-term dimensional stability and supports heavy auxiliary equipment without deformation.
The Shacman H3000 Connecting Plate acts as the central hub that unites the cross beam, side supports, and base plate into a cohesive structural unit. It is precisely machined to accept the Hexagon Head Bolt- Fine Thread and Self-Locking Nut, ensuring a rigid and durable connection.
This connecting plate is designed to withstand the high dynamic loads encountered during off-road and highway driving. Its geometry is optimized to reduce stress concentrations, thereby extending the fatigue life of the entire chassis assembly.
By using the Shacman H3000 Connecting Plate, fleet operators benefit from simplified maintenance, as the modular design allows for easy replacement of individual components without disturbing the overall alignment.
The Shacman H3000 Connecting Plate is fabricated from high-strength low-alloy (HSLA) steel, offering an excellent strength-to-weight ratio. The plate is laser-cut to precise dimensions and then heat-treated to relieve internal stresses.
All fastener holes are reamed to tight tolerances, ensuring that the Hexagon Head Bolt- Fine Thread and Self-Locking Nut achieve optimal clamp loads. The surface is shot-blasted and coated with a zinc-rich primer followed by a topcoat for superior corrosion protection.
Quality control includes dimensional verification and torque testing on every production batch, guaranteeing that each Shacman H3000 Connecting Plate meets the stringent requirements of the automotive industry.
The Shacman H3000 Connecting Plate has been subjected to extensive finite element analysis (FEA) and physical durability testing. It withstands vertical loads exceeding 10 tons and torsional forces up to 50,000 Nm without permanent deformation.
The combined action of the Cross Beam Assembly and the two Support Assemblies, tied together by the connecting plate, creates a highly rigid sub-frame that minimizes chassis flex. This translates to improved handling and reduced component wear.
Even under extreme conditions such as heavy braking, cornering, and off-road articulation, the Shacman H3000 Connecting Plate maintains its structural integrity, ensuring safety and reliability.
Installation of the Shacman H3000 Connecting Plate is straightforward, thanks to its symmetrical design and pre-drilled mounting holes. The process typically involves positioning the plate between the cross beam and the side supports.
All required fasteners – including the Hexagon Head Bolt- Fine Thread, Flat Washer, and Self-Locking Nut – are supplied as a kit. The fine-thread bolts allow for precise torque application using standard tools, ensuring consistent preload.
Clear installation markings and a comprehensive manual guide technicians through each step, reducing assembly time and the risk of errors. This modular approach also simplifies future disassembly for maintenance or upgrades.
The Shacman H3000 Connecting Plate is specifically engineered for Shacman H3000 series trucks, particularly those with the regulatory version, 750L fuel tanks, and day cab configurations. It is also compatible with certain M3000 variants with minor adjustments.
Applications include mounting of air conditioning units, fuel filtration systems, air reservoirs, and electrical junction boxes. The plate’s universal mounting pattern accommodates a variety of auxiliary equipment from different suppliers.
Whether used in long-haul fleet operations, construction, or mining, the Shacman H3000 Connecting Plate provides a reliable foundation that enhances vehicle uptime and reduces overall operating costs.
Regularly inspect the Shacman H3000 Connecting Plate and its fasteners for any signs of corrosion, cracking, or loosening. Pay special attention to the Self-Locking Nuts, as their locking feature may degrade over time.
Re-torque all Hexagon Head Bolts to the specified values during routine service intervals. Replace any worn Flat Washers to maintain proper load distribution. Clean the plate surface to prevent dirt accumulation that could accelerate wear.
If any component shows signs of deformation or fatigue, replace the entire assembly to ensure structural integrity. The modular design of the Shacman H3000 Connecting Plate makes such replacements quick and cost-effective.
| Part Number | Part Name |
|---|---|
| 190003888627 | Self-Locking Nut |
| DZ96189640146 | Cross Beam Assembly/Regulatory Version/750L/Day/2000 |
| DZ96189640141 | Left Support Assembly /330 |
| Q401B16 | Flat Washer |
| DZ96189640142 | Right Support Assembly /330 |
| Q151B1685TF3 | Hexagon Head Bolt- Fine Thread |
| DZ96189640153 | Base Plate |
Precision Engineering – Our Shacman H3000 Connecting Plate is manufactured with CNC machining and strict tolerance control, ensuring perfect alignment with cross beams and supports. This eliminates fitting issues and reduces installation time.
Superior Material Quality – We use high-grade HSLA steel with advanced anti-corrosion coatings. This provides exceptional strength and resistance to rust, even in harsh environments, extending the service life of your chassis.
Complete Fastener Kit Included – Every Shacman H3000 Connecting Plate comes with the necessary Self-Locking Nuts, Flat Washers, and Hexagon Head Bolts- Fine Thread. This simplifies procurement and ensures compatibility.
Expert Support & Documentation – We provide detailed installation manuals, torque specifications, and technical drawings. Our team is available to assist with any questions, ensuring a smooth integration into your vehicle.
Choosing our Shacman H3000 Connecting Plate means investing in a component that reduces overall maintenance costs. The robust design minimizes downtime caused by structural failures, and the modular layout allows for quick component swaps.
The integration of the Cross Beam Assembly and side supports through a single connecting plate reduces the number of parts, simplifying inventory management. This also lowers the overall weight of the chassis, contributing to improved fuel efficiency.
Additionally, our connecting plate is designed with future upgrades in mind – additional mounting holes are pre-drilled to accommodate potential accessory additions, giving fleet operators flexibility in vehicle configuration.
The Shacman H3000 Connecting Plate is more than just a piece of metal – it is the backbone of your truck’s chassis integrity. With its high-strength construction, precision fastening, and comprehensive accessory support, it delivers unmatched reliability.
Whether you are building a new vehicle or refurbishing an existing one, our connecting plate offers the perfect blend of performance, durability, and ease of use. Trust in the quality that comes from years of experience in heavy-duty truck components.
Equip your Shacman H3000 with our premium connecting plate and experience the difference in stability and longevity. Order now and ensure that your vehicle is built to last, mile after mile.
