The basic principle of the braking system is to utilize friction to convert the kinetic energy of the vehicle into thermal energy, thereby slowing or stopping the vehicle. Its main components include:
Daarby, the braking system of Shaanxi Trucks also includes auxiliary components such as brake lines, brake sub-pumps, and brake power distributors to ensure stable and reliable braking performance.
Brake systems of the Shacman vehicle include traveling brake (footbrake), auxiliary brake (exhaust brake), emergency and parking brake(manual brake), and trailer brake (optional device), i.e. 4 sets of brake device in total.
1. Driving Brake
2. Auxiliary Brake
Precautions for the application of exhaust brake:
3. Emergency and parking brake
Notice:
Prior to starting the engine, the manual brake valve handle must be in the brake position, or the effects of parking brake will eliminate after the pressure of brake system pressure increases.
Should any issues arise with your brake system, our team of highly skilled technicians stands ready to diagnose and rectify the problem promptly. Whether you’re experiencing brake failure, uneven braking, or unusual noises, we possess the expertise and resources to address the situation effectively and efficiently.
– Possible causes: brake fluid level is too low, brake line leakage or oil leakage, brake pads are badly worn.
– Solution: First stop the car, check whether the brake fluid level is normal, if necessary, add brake fluid; check whether there are signs of air or oil leakage in the brake line and brake device, if necessary, repair the leakage; check the wear of the brake pads, if necessary, timely replacement of the brake pads.
– Possible causes: uneven wear of brake pads, imbalance of brake drums or discs, improper installation of braking device, ens.
– Solution: Check the wear of the brake pads and replace them if necessary; check the balance of the brake drums or discs and correct any imbalance; check the installation of the brake unit and make sure it is installed correctly and firmly.
– Possible causes: poor contact between brake pads and brake disc or drum, rust on the surface of brake pads, loosening of braking device, ens.
– Solution: Check the contact between the brake pads and the brake disc or drum, if there is any bad contact, adjust or replace; clean the rust on the surface of the brake pads to ensure good contact between the pads and the brake disc or drum; check the installation of the brake device, if there is any looseness, tighten it.
– Possible causes: improper adjustment of the brake device, brake fluid contamination, brake oil circuit blockage.
– Solution: Check the adjustment of the brake device and adjust it if necessary; check whether the brake fluid is clean and replace it if it is contaminated; check whether the brake oil circuit is clogged and clean or replace the related parts if necessary.
– Possible reasons: brake system pressure sensor failure, brake system electronic control unit failure, ens..
– Solution: Use diagnostic instruments to diagnose the brake system, find the fault code and repair or replace the faulty parts accordingly; check the electrical connection of the brake system to make sure it is well connected.
Die stabiele en betroubare werkverrigting van die Shaanxi-vragmotors se vooras het die toets van langafstand en swaardiensvervoer gestaan, Gee ons groot vertroue.
Die roetine -instandhouding van die vooras is ook baie eenvoudig, en die onderhoudsgids wat deur die vervaardiger voorsien word, is duidelik en maklik om te verstaan, waardeur ons maklik roetine-instandhouding kan uitvoer om die langtermyn-stabiele werking van die voertuig te verseker.
