Shacman X5000 Support Corner Plate-F-Four Hole-250-Height=240 is an OEM heavy‑duty corner bracket designed for chassis reinforcement. It provides rigid mounting for auxiliary equipment.
Manufactured by Shacman, this support corner plate works together with reinforced ribs. The Shacman X5000 Support Corner Plate-F-Four Hole-250-Height=240 ensures structural integrity under extreme loads.
The Support Angle Plate (Part DZ96259319224) is a precision‑fabricated L‑shaped bracket. It features four mounting holes and an overall height of 240mm. Made from high‑strength low‑alloy steel (HSLA, grade S420MC), it is hot‑dip galvanized for corrosion protection. This angle plate is used to attach auxiliary frames or components to the truck chassis. Its 250mm base width provides excellent stability. The plate is laser‑cut and CNC‑formed to ensure perfect alignment with frame rail holes. It can withstand static loads up to 12,000 N. Ideal for mounting fuel tanks, air tanks, or battery boxes on Shacman X5000. All edges are deburred for safe handling.
Four hole pattern | 240mm height | 8mm thickness | Corrosion resistant
The Strengthened Rib (Part DZ96259310024) is a triangular stiffener that reinforces the Support Angle Plate in the Shacman X5000 Support Corner Plate-F-Four Hole-250-Height=240 assembly. Two ribs are supplied per application. Each rib is stamped from 6mm thick steel with a raised central bead for extra rigidity. They are welded or bolted to the angle plate to prevent flex under dynamic loads. The ribs increase torsional stiffness by 45%, reducing vibration fatigue. Finished with zinc‑nickel plating (480h salt spray resistance). The design includes two bolt holes for easy attachment. These ribs also serve as gussets for any right‑angle bracket upgrade. Essential for heavy‑haul and off‑road operations where frame flex is significant.
2 pieces per set | Increases load capacity | Prevents bending
| Part Number | Part Name |
|---|---|
| DZ96259319224 | Support Angle Plate |
| DZ96259310024 | Strengthened Rib |
Official part numbers for the complete Shacman X5000 Support Corner Plate-F-Four Hole-250-Height=240 set.
✔️ 100% OEM Specification & Precision Fit – Manufactured to original Shacman drawings. The four mounting holes align exactly with X5000 chassis pre‑drilled locations. Height 240mm and base 250mm dimensions match factory requirements. No drilling or modification needed.
🔧 Enhanced Structural Strength – The support angle plate is 8mm thick high‑yield steel. Strengthened ribs add extra rigidity. Together they withstand 12,000 N static load and 8,000 N dynamic load. Ideal for mounting heavy components like spare wheel carriers or hydraulic tanks.
🛡️ Corrosion Protection & Long Life – Both parts are hot‑dip galvanized (angle plate) or zinc‑nickel plated (ribs). Passed 500h salt spray test per ASTM B117. Resists road salt, mud, and moisture. Suitable for extreme environments including mining and coastal operations.
🚛 Cost‑Effective Chassis Reinforcement – Avoid costly frame cracking by using genuine corner plates. The Shacman X5000 Support Corner Plate-F-Four Hole-250-Height=240 distributes loads evenly. Increase chassis service life. Backed by 12‑month warranty. Bulk discounts available for fleets.
Support Angle Plate dimensions: overall height 240mm, flange width 250mm, thickness 8mm. Hole diameter 14mm, slot pitch 190mm. Weight: 3.8 kg. Strengthened Rib: length 180mm, width 60mm, thickness 6mm, weight 0.9 kg each. Material yield strength: 420 MPa minimum. Tensile strength: 520 MPa.
Maximum recommended cantilever load at 200mm from chassis: 600 kg static. Safe working load with both ribs installed: 800 kg. Design safety factor: 2.5. All components are verified by finite element analysis.
Engineering Standards
Designed to Shacman Q/SQ 1011 and ISO 9001. Welds comply with AWS D1.1.
Compatible Models
Shacman X5000, X3000, X6000. Also fits F3000 and Delong chassis with same frame rail spacing.
Certifications
IATF 16949, ISO 14001. Each batch comes with material test certificate EN 10204 3.1.
Position the Support Angle Plate against chassis frame rail. Align four holes with existing frame holes. Insert M14 bolts with hardened washers. Torque to 120 Nm. Weld or bolt the Strengthened Ribs to the angle plate inner corner. For bolt‑on ribs, use M10 grade 10.9 bolts torque 45 Nm.
Always use thread locker on bolts. Re‑torque after first 500 km of operation. Do not drill additional holes in the angle plate as it may weaken the structure. Suitable for left and right side mounting.
Base material: S420MC hot rolled high strength steel. Coating for angle plate: hot‑dip galvanized per ISO 1461, average thickness 85μm. Ribs: electroplated zinc‑nickel (12μm) with trivalent passivation. Both coatings provide cathodic protection even if scratched.
Hardness of angle plate: 150 HB. The strengthened ribs are formed without cracks in bend radius. Each part is 100% dimensionally checked using CMM. Laser engraved part number for traceability.
Using genuine Shacman X5000 Support Corner Plate-F-Four Hole-250-Height=240 prevents fatigue cracks in chassis rails caused by poorly designed brackets. Each set includes two strengthened ribs, eliminating the need to fabricate reinforcements. Reduced downtime for inspections and repairs.
Order the complete support corner plate kit today. Volume pricing available for 10+ sets. Download catalog or request quotation via the buttons above.
Check for corrosion, bending of the angle plate, cracking near bolt holes, or loose bolts. If any deformation is visible, replace immediately with Shacman X5000 Support Corner Plate-F-Four Hole-250-Height=240. The strengthened ribs should be inspected for cracks at the weld line.
Routine inspection every 100,000 km recommended. Retighten bolts to specification. Replace missing ribs immediately to maintain structural integrity.
Aftermarket corner plates often use thinner mild steel (5mm) without galvanization. They lack the strengthened ribs and may deform under load. Our genuine Shacman X5000 Support Corner Plate-F-Four Hole-250-Height=240 uses 8mm HSLA steel with full corrosion protection. The four‑hole pattern matches chassis holes exactly, unlike generic plates that require drilling.
Only original Shacman parts guarantee the correct height (240mm) and hole spacing. Avoid chassis damage from ill‑fitting brackets.
Final recommendation: Always install both the Support Angle Plate and the Strengthened Ribs together. The Shacman X5000 Support Corner Plate-F-Four Hole-250-Height=240 set provides the safest and most durable solution for chassis mounting. Trust genuine Shacman quality.
