WP10.5H National V Right Rear Processor Assembly
Процессорный Модуль
Módulo Procesador
OEM WP10.5H National V Right Rear Processor Assembly DZ96259542689 precision‑engineered for the Shacman X5000 with WP10.5H engine. This advanced DZ96259542689 emissions control module manages after‑treatment system functions for National V compliance.
Built with robust electronic architecture and sealed connectors, the WP10.5H National V Right Rear Processor Assembly DZ96259542689 processes sensor data and controls SCR dosing for optimal NOx reduction.
Replacing a faulty processor with the genuine DZ96259542689 unit restores proper emissions system function and prevents the fault codes that lead to engine derate conditions.
| Parameter | Specification |
|---|---|
| OEM Part Number | DZ96259542689 |
| Product Name | WP10.5H National V Right Rear Processor Assembly |
| Brand / Model | Shacman X5000 |
| Compatible Engine | WP10.5H Diesel Engine |
| Emissions Standard | National V Compliant |
| Housing Material | Die‑Cast Aluminum with Sealed Enclosure |
| Connector Type | Multiple sealed multi‑pin connectors with gold terminals |
| Operating Voltage | 24 Volts DC nominal |
| Protection Rating | IP67 dust and water ingress protection |
| Application | Shacman X5000 WP10.5H SCR after‑treatment control |
The DZ96259542689 processor assembly is the electronic control unit for the Shacman X5000 after‑treatment system. It interprets data from NOx sensors, temperature probes, and pressure differential sensors.
Based on this sensor input, the processor calculates the precise amount of diesel exhaust fluid to inject into the exhaust stream, optimizing the chemical reaction that converts harmful nitrogen oxides into harmless nitrogen and water.
This module also manages system diagnostics, fault code storage, and communication with the main engine control module, ensuring seamless integration of emissions control with overall vehicle operation.
The DZ96259542689 processor features a die‑cast aluminum housing with an IP67 protection rating, making it resistant to pressure washing, road spray, and the harsh under‑chassis environment.
Gold‑plated connector terminals ensure reliable signal transmission and resist the fretting corrosion that can cause intermittent electrical faults in chassis‑mounted electronic modules.
The DZ96259542689 processor mounts at the right rear chassis location using dedicated brackets. All electrical connectors must be fully seated with locking tabs engaged to prevent moisture ingress.
After replacement, the module may require initialization using the manufacturer’s diagnostic tool to establish communication with the engine control module and clear stored fault codes.
Every DZ96259542689 processor undergoes end‑of‑line functional testing on a hardware‑in‑the‑loop simulator that verifies all input channels, output drivers, and CAN bus communication.
Thermal cycling and vibration testing validate that the module’s electronics survive the temperature extremes and mechanical stresses of chassis‑mounted operation throughout the vehicle’s service life.
A malfunctioning DZ96259542689 processor typically triggers the malfunction indicator lamp and stores communication fault codes. The engine may enter derate mode limiting power output.
Corrosion on connector terminals or damaged wiring can mimic processor faults. The harness and connections should be thoroughly inspected before condemning the processor module itself.
When replacing the processor, all related sensor connectors should be inspected and cleaned. The module’s software version must be compatible with the vehicle’s engine control module calibration.
The DZ96259542689 processor is specifically programmed for the WP10.5H engine and National V emissions standard. It is not interchangeable with modules from other engine or emissions variants.
Fleet operators should maintain spare processor modules for rapid replacement when diagnostic procedures confirm module failure, minimizing vehicle downtime from SCR system faults.
Aftermarket or remanufactured processors with incorrect calibration can cause emissions non‑compliance. We supply only the authentic Shacman X5000 WP10.5H National V Right Rear Processor Assembly DZ96259542689.
Each processor is factory‑programmed and sealed in protective packaging. The part number DZ96259542689 is clearly marked on the module and packaging for identification.
Our international logistics network ensures genuine DZ96259542689 processor assemblies are available for dispatch to dealerships and fleet facilities worldwide.
Complete processor assembly with sealed housing and connectors. Factory‑programmed and ready for installation with diagnostic initialization.
Expert guidance on processor installation and SCR system diagnostics. We help ensure your DZ96259542689 module provides reliable emissions control.
For current stock availability on the genuine WP10.5H National V Right Rear Processor Assembly DZ96259542689, please use the contact buttons above.
