Cross Beam
Поперечная Балка
Travesaño Transversal
OEM Cross Beam DZ96259510423 precision‑engineered for the Shacman X5000 chassis frame. This structural DZ96259510423 member spans between the left and right frame rails, providing lateral stability and torsional resistance under load.
Fabricated from high‑strength structural steel with durable anti‑corrosion coating, the Cross Beam DZ96259510423 maintains precise frame geometry while serving as a mounting foundation for critical vehicle systems.
Replacing a damaged or corroded cross beam with the genuine DZ96259510423 component restores proper chassis stiffness and prevents the misalignment that affects handling and component life.
| Parameter | Specification |
|---|---|
| OEM Part Number | DZ96259510423 |
| Product Name | Cross Beam |
| Brand / Model | Shacman X5000 |
| Material | High‑Strength Structural Steel with Black Powder Coating |
| Beam Profile | C‑channel section with welded end flanges |
| Overall Length | Approximately 850.00 mm |
| Flange Bolt Pattern | Multiple holes per flange, 14.00 mm diameter |
| Corrosion Protection | Black powder coating, 600 hours salt spray rated |
| Load Capacity | Engineered for heavy‑duty chassis reinforcement |
| Application | Shacman X5000 chassis frame lateral bracing |
The DZ96259510423 cross beam connects the left and right frame rails at a designated chassis location. It prevents the rails from spreading or twisting relative to each other during vehicle operation.
When traversing uneven terrain, the frame experiences torsional loading. The cross beam resists this motion, maintaining the structural integrity of the entire assembly and ensuring consistent vehicle handling.
This component also serves as a mounting platform for chassis‑mounted systems, providing secure attachment points for exhaust brackets, air tanks, and related hardware on the Shacman X5000 platform.
The DZ96259510423 cross beam features a C‑channel profile that provides excellent bending strength with efficient material use. Welded end flanges ensure robust attachment to the frame rails.
The black powder coating provides durable protection against stone chips and road spray, maintaining the beam’s structural integrity throughout the vehicle’s service life in demanding environments.
The DZ96259510423 cross beam bolts to pre‑drilled holes in the chassis frame rails using high‑strength fasteners. Bolts must be installed loosely, then tightened progressively after alignment.
Proper installation requires parallel frame rails at the specified spacing. Forcing the cross beam into position with misaligned rails introduces stresses that can lead to premature cracking.
Each production batch of DZ96259510423 cross beams undergoes dimensional verification and weld integrity inspection to ensure flange positions and hole patterns conform to specifications.
Welded joints are visually inspected and sampled for non‑destructive testing to verify complete penetration and absence of defects that could compromise structural performance in service.
Rust staining or bubbling of the powder coating on the DZ96259510423 cross beam indicates corrosion has penetrated the protective layer, potentially reducing structural capacity over time.
Cracks at weld junctions or flange bolt holes are evidence of fatigue. A cracked cross beam must be replaced immediately to prevent frame distortion and component detachment.
During chassis inspections, cross beams and fasteners should be checked for tightness and condition. Loose bolts allow movement that accelerates wear and fatigue at the connection points.
The DZ96259510423 cross beam is specifically configured for the Shacman X5000 chassis frame spacing and bolt hole patterns, matching factory‑specified mounting locations exactly.
Fleet operators should maintain spare cross beams for prompt replacement when collision damage or corrosion compromises the original structural member during vehicle service.
Aftermarket cross beams with inadequate material may compromise chassis safety. We supply only the authentic Shacman X5000 Cross Beam DZ96259510423 built to OEM specifications.
Each cross beam is individually packaged with edge protection. The part number DZ96259510423 is clearly displayed on the component and packaging for immediate identification.
Our international logistics network ensures genuine DZ96259510423 cross beams are available for dispatch to dealerships and fleet facilities worldwide.
Complete cross beam with welded end flanges and powder coating. Ready for chassis frame installation with appropriate fasteners.
Expert guidance on cross beam installation and frame alignment. We help ensure your DZ96259510423 beam provides reliable chassis reinforcement.
For current stock availability on the genuine Cross Beam DZ96259510423, please use the contact buttons above.
