Left Bracket
Левый кронштейн
Soporte izquierdo
The genuine Shacman X5000 Left Bracket with OEM number DZ97189585615 is a precision‑stamped steel support designed for the left‑side mounting of electronic control modules, fuse boxes, or relay panels within the cab or chassis of the X5000 heavy‑duty truck. This left‑hand bracket provides a rigid, vibration‑resistant platform that ensures sensitive electrical components remain securely positioned, protecting them from mechanical shock and environmental contaminants. Manufactured from high‑strength, zinc‑nickel plated steel, DZ97189585615 offers exceptional corrosion resistance and structural integrity. Every mounting hole and slot matches Shacman’s original left‑side chassis patterns, guaranteeing a direct, bolt‑on installation. The open design promotes natural airflow around mounted components, reducing thermal stress. This bracket is essential for restoring original factory mounting after component replacement, retrofitting new modules, or when upgrading electrical systems on the X5000.
A missing or damaged left bracket can leave important electrical units unsupported, leading to vibration damage, connector fatigue, and intermittent electrical faults. Installing OEM DZ97189585615 restores a secure, properly positioned mounting platform, protecting the vehicle’s critical electronics and ensuring reliable operation. This bracket is essential for maintaining the integrity of the X5000’s electrical system.
Each DZ97189585615 left bracket is 100% inspected for dimensional accuracy, plating thickness, and thread integrity. Choose genuine Shacman quality for secure, long‑lasting electronic component mounting.
| Parameter | Specification |
|---|---|
| OEM Part Number | DZ97189585615 |
| Product Name | Left Bracket / Left‑Side Controller Support |
| Brand | Shacman (Genuine OEM) |
| Application | Shacman X5000 – Left‑side mounting for ECU, fuse box, relay panel |
| Material | High‑strength steel (DC04), zinc‑nickel plated |
| Mounting Hole Pattern | Four M8 threaded holes, 80 mm × 60 mm spacing, left‑hand orientation |
| Overall Dimensions (L×W×H) | 210 mm × 140 mm × 45 mm (approx.) |
| Load Capacity | ≤ 15 kg (uniformly distributed) |
| Corrosion Protection | Zinc‑nickel plating, 480h salt spray (ASTM B117) |
| Vibration Isolation | Slotted holes for optional rubber grommets (not included) |
| Hardware Included | M8 bolts, washers, and lock nuts (4 sets) |
| Temperature Range | -40°C to +105°C |
| Weight (approx.) | 0.88 kg |
| Standards | ISO 9001, IATF 16949, Shacman Q/SC 760 |
The Shacman left bracket DZ97189585615 is engineered specifically for left‑side mounting applications, with a handed geometry that ensures correct placement and orientation relative to the vehicle’s chassis. The bracket is stamped from high‑strength steel with reinforced corners and embossed ribs to resist flexing under dynamic loads. Its open‑frame design provides ample airflow to cool mounted electronic units while preventing debris accumulation. Precision‑machined mounting holes and slots allow for fine adjustment of component position, accommodating various module footprints. The zinc‑nickel plating offers exceptional resistance to corrosion, ensuring the bracket remains serviceable even after years of exposure to road salt, moisture, and mud. Each bracket is 100% dimensionally inspected to guarantee that the hole pattern matches the X5000 factory left‑side mounting locations. The plating thickness is verified to exceed 480 hours of salt spray resistance. Random samples are subjected to static load testing (2x rated capacity) and vibration testing (20G, 10‑2000 Hz) to validate the design. These engineering controls ensure that the DZ97189585615 bracket provides reliable, long‑lasting support for critical electrical systems.
The left‑hand geometry of the bracket is designed to align perfectly with the vehicle’s left‑side harness routing, reducing cable strain and preventing chafing. The slotted holes allow for precise positioning of the mounted component, ensuring optimal connector access and clearance from adjacent structures.
In modern heavy‑duty trucks, the left side of the cab or chassis often houses the engine ECU, main fuse box, and other critical electrical modules. These components are sensitive to vibration, shock, and heat. A poorly supported module can suffer from cracked circuit boards, broken solder joints, or loose connectors, leading to intermittent faults, diagnostic trouble codes, and even complete system failure. The DZ97189585615 left bracket provides a rigid, vibration‑damped platform that isolates the module from road and engine vibrations. By securing the module firmly, the bracket also protects the connector pins from fretting corrosion caused by micro‑movement, a common cause of intermittent electrical issues. When a left bracket is damaged or missing, the module can sag or shift, causing stress on the wiring harness connectors and potentially leading to open circuits or shorts. The OEM bracket restores the factory mounting geometry, ensuring that all connectors align correctly and that the wiring harness is not under tension. This is especially critical in vehicles with high‑mileage or severe‑duty use, where vibration fatigue is a common cause of electronics failure. By using genuine Shacman brackets, fleet operators can significantly reduce the incidence of electrical faults and avoid costly roadside breakdowns. The bracket also provides a grounded mounting surface, which is essential for proper electromagnetic compatibility (EMC) and can help reduce electrical noise interference between modules. The zinc‑nickel plating offers superior corrosion protection, ensuring that the mounting hardware remains easy to service even after years of exposure to salt, mud, and moisture.
The bracket is also designed to accommodate optional rubber vibration isolators, which can be added to further reduce transmitted vibration for especially sensitive modules like the engine ECU. The isolators, if installed, significantly attenuate high‑frequency vibrations, extending the life of the controller’s internal components. The bracket’s precise hole alignment also ensures that the module is positioned correctly for optimal cooling airflow from the vehicle’s HVAC or natural convection, preventing thermal derating and maintaining performance.
Incorrectly positioned modules can put tension on wiring harness connectors, causing intermittent signal loss or short circuits. The DZ97189585615 bracket’s precise left‑hand hole alignment ensures that the module is located exactly where the harness expects it, eliminating unnecessary strain and reducing the risk of electrical gremlins.
Installing the Shacman left bracket DZ97189585615 is a straightforward process. Begin by removing the old bracket (if present) and cleaning the left‑side mounting area on the cab floor or chassis rail. Position the bracket over the pre‑drilled chassis holes (matching X5000 left‑side factory locations) and secure it using the included M8 bolts, washers, and lock nuts. Torque the fasteners to 25‑30 Nm. Then mount the controller, fuse box, or relay panel to the bracket using the provided hardware, ensuring that the connectors are accessible. If rubber isolators are used, insert them between the module and the bracket before tightening.
This bracket is compatible with all Shacman X5000 models from 2015 onward, including the X5000 M12, heavy‑haul, and construction variants. It directly replaces original part numbers DZ97189585614 and DZ97189585616. Applications include left‑side mounting of engine ECUs, transmission controllers, main fuse boxes, and auxiliary relay panels. Always verify the OEM marking DZ97189585615 on the bracket before installation. If your vehicle uses a different left‑side layout, the slotted holes allow for some adjustment; however, it is recommended to use the factory bolt pattern for optimal fit.
When installing the bracket, ensure that the wiring harness has enough slack to accommodate the mounting position without stress. Keep a spare DZ97189585615 bracket in your parts inventory for rapid module replacement or retrofits. After installation, verify that the module is securely fastened and that no connectors are strained.
Periodically check the bracket bolts for tightness, especially after the first 1,000 km of operation. Inspect the bracket for signs of corrosion or bending. If any damage is detected, replace the bracket immediately. Keep the mounting surfaces clean to prevent galvanic corrosion between dissimilar metals.
Shacman X5000 trucks are used in some of the most demanding environments – mining, construction, oilfields, and long‑haul freight. The left bracket DZ97189585615 is designed to withstand these conditions. The zinc‑nickel plated steel resists corrosion from road salt, mud, and chemical spills. The robust construction can withstand high vibration levels (tested to 20G) without loosening or fatigue cracking. The open design allows debris to fall through, preventing accumulation that could trap moisture. In mining and construction trucks, electronic modules are exposed to constant dust and shock. The bracket keeps the ECU or fuse box securely in place, preventing it from being dislodged by impacts. In arctic operations, the steel retains its impact toughness down to -50°C, and the plating prevents rust from condensation. For highway fleets, the bracket provides a stable mount that reduces the risk of connector fretting, a common cause of intermittent faults that can be difficult to diagnose. The bracket is also compatible with the addition of heat shields (sold separately) for applications where exhaust heat is a concern.
The left‑hand design also facilitates easier harness routing, as the module’s connectors can be oriented for optimal cable management on the left side of the vehicle. This reduces the risk of chafing and improves the overall neatness of the electrical installation. By using genuine Shacman brackets, fleet operators can maintain a consistent, professional appearance and ensure that all modules are correctly positioned for cooling airflow.
1. Exact fitment: Precision‑matched to X5000 left‑side chassis mounting points, ensuring bolt‑on installation without modifications. 2. Superior material: High‑strength zinc‑nickel plated steel offers durability and corrosion resistance. 3. Handed design: Left‑specific geometry ensures correct orientation for harness routing and component clearance. 4. Vibration damping option: Accommodates rubber isolators to protect sensitive electronics. 5. Full traceability: Batch‑coded with material test certificate and load test report. Aftermarket brackets often use thinner steel, have poor corrosion protection, or lack precise hole alignment, leading to loose modules and potential damage. The genuine Shacman bracket’s premium materials and exact dimensions ensure reliable support and long service life. Investing in DZ97189585615 protects your truck’s electronic systems, reduces downtime, and maintains warranty compliance. For fleets, standardizing on genuine brackets ensures consistent module mounting and simplifies service across all trucks.
A single ECU or fuse box failure due to vibration or corrosion can cost thousands in replacement and programming. By using the DZ97189585615 bracket, you significantly reduce the risk of such failures. The bracket’s long life and corrosion resistance also minimize the need for replacement, saving labor and parts costs over the vehicle’s lifetime. Additionally, organized module mounting simplifies diagnostics, reducing technician time.
Shacman’s left bracket DZ97189585615 is produced in an IATF 16949 certified facility. The steel is stamped and formed on high‑capacity presses, then welded using robotic welding for consistent joint strength. The welded assembly is normalized to relieve residual stresses, then zinc‑nickel plated in a controlled electroplating line with thickness verification by X‑ray fluorescence. The mounting holes are machined to precise tolerances, and each bracket is assembled with the included hardware. Random samples are subjected to static load testing (2x rated capacity), vibration testing (20G, 10‑2000 Hz), and salt spray testing (480 hours). Only brackets that pass all criteria are laser‑marked with the OEM part number and packaged in protective bags. The hardware is grade 10.9 and is tested for tensile strength.
This rigorous quality system ensures every DZ97189585615 bracket performs identically to the original factory component. Consistency is critical for maintaining electronic module security and preventing vibration‑related failures across your entire fleet. The facility also complies with REACH and RoHS environmental regulations, using only lead‑free, water‑based coatings.
Genuine Shacman left bracket DZ97189585615 is stocked by authorized distributors worldwide. Parts are supplied in sealed anti‑corrosion bags, individually boxed with all hardware and installation instructions, labeled with OEM part number and batch traceability. Bulk packs of 10 brackets are available for fleet maintenance depots. Expedited shipping options are available through Shacman’s regional logistics hubs in North America, Europe, Asia, Africa, and the Middle East, with typical delivery within 3‑5 business days. Always purchase from certified dealers and verify the holographic authenticity label. Counterfeit brackets may be made from mild steel, lack proper plating, or have inaccurate hole spacing, leading to misalignment and potential module damage.
For preventive maintenance programs, automated replenishment ensures your workshop never runs out of essential left brackets. Keep a stock of DZ97189585615 on every service truck to handle module upgrades, retrofits, or bracket replacements in the field. Many fleets replace these brackets during major electrical system overhauls to ensure all modules are securely mounted.
The Shacman Left Bracket DZ97189585615 is a robust, precision‑engineered steel bracket that provides a secure, vibration‑damped platform for left‑side electronic control modules, fuse boxes, and relay panels in the X5000. With zinc‑nickel plating, optional vibration isolation, and exact factory fitment, this genuine OEM bracket protects your vehicle’s critical electronics from damage and ensures reliable operation. By choosing DZ97189585615, you safeguard your investment and reduce downtime. Don’t trust generic aftermarket supports – insist on genuine Shacman quality for every module mounting application.
