Pedal Dust Cover
Пылезащитный Чехол
Protector Antipolvo
OEM Pedal Dust Cover 81.48227.0006 precision‑molded for the Shacman X5000 cab floor interface. This flexible 81.48227.0006 boot seals the pedal opening, preventing dust, moisture, and noise from entering the cab through the pedal penetration.
Manufactured from durable elastomeric material with excellent flexibility, the Pedal Dust Cover 81.48227.0006 maintains its sealing integrity through millions of pedal cycles without cracking or tearing.
Replacing a torn or missing dust cover with the genuine 81.48227.0006 component restores the cab environmental seal and prevents the ingress that causes interior contamination.
| Parameter | Specification |
|---|---|
| OEM Part Number | 81.48227.0006 |
| Product Name | Pedal Dust Cover |
| Brand / Model | Shacman X5000 |
| Material | Flexible EPDM Rubber |
| Cover Type | Convoluted boot with mounting flange |
| Pedal Opening Diameter | Approximately 85.00 mm × 45.00 mm |
| Mounting Type | Push‑fit flange with integrated retaining lip |
| Operating Temperature | -40°C to +100°C |
| Flex Life | ≥ 1 million cycles without cracking |
| Application | Shacman X5000 cab floor pedal penetration seal |
The 81.48227.0006 pedal dust cover seals the opening where the clutch or brake pedal passes through the Shacman X5000 cab floor, creating a barrier against environmental contaminants.
Without this seal, road dust, engine compartment fumes, water spray, and cold air can enter the cab interior, reducing driver comfort and potentially affecting other interior components over time.
The convoluted boot design of the Pedal Dust Cover 81.48227.0006 flexes with pedal movement without restricting travel, maintaining the seal throughout the full pedal stroke range.
The 81.48227.0006 cover is molded from EPDM rubber, selected for its outstanding resistance to ozone, UV radiation, and the temperature extremes encountered in the cab floor environment.
The material remains flexible at low temperatures and resists hardening or cracking after prolonged exposure to engine heat radiating through the cab floor from the powertrain below.
The 81.48227.0006 cover installs by pressing its mounting flange into the cab floor opening until the retaining lip fully engages around the perimeter of the penetration.
During cab interior inspections, the dust cover should be checked for tears, deformation, or separation from the floor. Damaged covers must be replaced to maintain the environmental seal.
Each production batch of 81.48227.0006 covers undergoes dimensional verification and material hardness testing to ensure consistent fit and sealing performance.
Flex testing subjects sample covers to over one million actuation cycles while monitoring for cracks, tears, or loss of mounting retention, validating long‑term durability.
A torn or split 81.48227.0006 cover allows visible gaps around the pedal lever. Dust accumulation or water stains on the cab floor near the pedal indicate seal failure.
A cover that has pulled away from the floor opening no longer provides a seal. The retaining lip should be inspected for damage or deformation that prevents proper engagement.
During pedal service, the dust cover should be examined and replaced if any damage is found. The modest cost of the cover is negligible compared to interior contamination cleanup.
The 81.48227.0006 cover is specifically dimensioned for the Shacman X5000 cab floor pedal openings, with flange geometry matching the factory penetration dimensions exactly.
Fleet workshops should maintain spare dust covers for replacement when pedal service reveals torn or missing seals, ensuring continued cab environment protection.
Aftermarket dust covers with incorrect dimensions or inferior materials may not seal properly. We supply only the authentic Shacman X5000 Pedal Dust Cover 81.48227.0006 built to OEM specifications.
Each cover is individually packaged to protect the sealing flange. The part number 81.48227.0006 is clearly printed on the packaging for immediate identification.
Our international logistics network ensures genuine 81.48227.0006 pedal dust covers are available for dispatch to dealerships and fleet facilities worldwide.
Single pedal dust cover with integrated mounting flange. Ready for push‑fit installation into the cab floor opening.
Expert guidance on dust cover installation and cab sealing. We help ensure your 81.48227.0006 cover provides effective environmental protection.
For current stock availability on the genuine Pedal Dust Cover 81.48227.0006, please use the contact buttons above.
