Work Light Clamp
Зажим Рабочей Фары
Abrazadera de Luz
OEM Work Light Clamp 81.62940.2062 precision‑formed for the Shacman X5000 heavy‑duty truck. This robust 81.62940.2062 fastening component grips work light mounting bars securely, maintaining proper light positioning despite continuous vibration and road shock.
Manufactured from galvanized spring steel with an integrated cushioning liner, the Work Light Clamp 81.62940.2062 provides consistent clamping force while protecting the light bar surface from marring and corrosion.
Replacing worn or deformed clamps with the genuine 81.62940.2062 component ensures that work lights remain accurately aimed and securely attached throughout demanding operations.
| Parameter | Specification |
|---|---|
| OEM Part Number | 81.62940.2062 |
| Product Name | Work Light Clamp |
| Brand / Model | Shacman X5000 |
| Material | Spring Steel with EPDM Liner and Zinc Plating |
| Clamp Inner Diameter | 30.00 mm nominal |
| Clamp Width | 20.00 mm |
| Bolt Hole Diameter | 8.00 mm single fastening point |
| Clamping Force | ≥ 800 N at recommended torque |
| Operating Temperature | -40°C to +110°C |
| Application | Shacman X5000 work light bar attachment |
The 81.62940.2062 work light clamp serves as the direct gripping element that secures a cylindrical light mounting bar to its support bracket. It converts the tightening force of a single bolt into uniform radial pressure around the bar.
Work lights on commercial vehicles are subjected to constant high‑frequency vibration from the engine and low‑frequency shocks from road irregularities. A properly designed clamp prevents the light assembly from rotating on its mounting bar.
The Work Light Clamp 81.62940.2062 also allows for angular adjustment during installation. The light can be aimed correctly before the clamp bolt is fully tightened, then locked in position.
The 81.62940.2062 clamp body is formed from heat‑treated spring steel that maintains its elastic clamping force indefinitely. Unlike mild steel clamps that permanently deform, this material springs back to its original shape.
An EPDM rubber liner bonded to the inner surface provides a non‑marring grip on the light bar. This liner also enhances friction, further resisting rotational movement, and electrically isolates the light from the bracket.
The 81.62940.2062 clamp bolt should be tightened to the manufacturer’s recommended torque value. Over‑tightening can crush the light bar or strip the threads, while under‑tightening allows the light to move.
Periodic inspection of the clamp bolt torque is recommended, especially after the first hours of operation following installation. The Work Light Clamp 81.62940.2062 should be checked whenever the vehicle undergoes routine service.
Each production lot of 81.62940.2062 clamps is sampled for clamping force verification using a calibrated torque wrench and load cell. The clamp must achieve the specified force without permanent deformation.
Vibration testing according to ISO 16750‑3 standards subjects mounted clamps to swept‑frequency excitation. The clamp assembly must retain its initial torque setting throughout the test duration.
A work light that drifts out of alignment despite repeated tightening indicates that the 81.62940.2062 clamp has lost its spring tension or the liner has hardened and lost its grip on the mounting bar.
Visible rust on the clamp body or cracking of the rubber liner are clear indicators that the clamp should be replaced. Continuing to use a degraded clamp risks the light becoming detached during vehicle operation.
When replacing work lights or adding new lighting accessories, always install new clamps. The modest cost of genuine Work Light Clamp 81.62940.2062 units is negligible compared to the expense of a lost or damaged light fixture.
The 81.62940.2062 clamp is dimensioned for the standard work light bar diameter used across the Shacman X5000 range. It mates correctly with the corresponding clamp seat assemblies on this vehicle platform.
Fleet operators should maintain an inventory of these clamps as part of their lighting system spare parts. Prompt replacement of worn clamps maintains proper light aiming for safe nighttime operation.
Aftermarket clamps made from inferior materials lose their grip quickly. We supply only the authentic Shacman X5000 Work Light Clamp 81.62940.2062 manufactured to stringent OEM quality standards.
Each clamp is packaged in a protective sleeve to prevent damage to the liner during transit. The part number 81.62940.2062 is clearly printed on the packaging label for easy identification.
Our international supply chain ensures that genuine 81.62940.2062 work light clamps are available for prompt delivery to workshops and fleet maintenance facilities across all major continents.
Single work light clamp with integrated EPDM liner. Mounting bolt included. Protective packaging preserves the liner surface during shipping.
Expert guidance on work light clamp installation and torque procedures. We help ensure your 81.62940.2062 clamps provide secure light mounting.
For current stock availability and pricing on the genuine Work Light Clamp 81.62940.2062, please use the contact buttons above.
