Clamp (S)
Хомут Малый
Abrazadera Pequeña
OEM Clamp (S) DZ93259190954 precision‑manufactured for the Shacman X5000 fluid and air systems. This reliable DZ93259190954 small‑diameter fastening component secures hoses to fittings, maintaining leak‑free connections under pressure and vibration.
Constructed from zinc‑plated spring steel with smooth edge design, the Clamp (S) DZ93259190954 provides consistent radial clamping force without damaging the hose surface or restricting internal flow diameter.
Replacing a corroded or loose clamp with the genuine DZ93259190954 component prevents the coolant, air, or fluid leaks that cause system malfunctions and costly vehicle downtime.
| Parameter | Specification |
|---|---|
| OEM Part Number | DZ93259190954 |
| Product Name | Clamp (S) |
| Brand / Model | Shacman X5000 |
| Material | Spring Steel with Zinc Electroplating |
| Clamp Type | Constant‑tension band clamp with formed ears |
| Clamping Range | Approximately 20.00 mm to 25.00 mm diameter |
| Band Width | 9.00 mm |
| Corrosion Protection | Zinc electroplating, 200 hours salt spray rated |
| Edge Design | Smooth rolled edges to prevent hose damage |
| Application | Shacman X5000 small‑diameter hose and tube retention |
The DZ93259190954 clamp (S) is a small‑diameter fastening component used throughout the Shacman X5000 to secure coolant hoses, air lines, and fluid tubing to their respective fittings and connectors.
Despite its compact size, this clamp performs a critical function. A single loose or failed clamp can cause fluid loss, air leaks, or system pressure failure that leads to component damage or vehicle breakdown.
The constant‑tension design of the Clamp (S) DZ93259190954 automatically compensates for hose compression set and thermal expansion, maintaining sealing force without requiring periodic retightening.
The DZ93259190954 clamp is manufactured from heat‑treated spring steel that maintains its elastic clamping force indefinitely, resisting the permanent deformation that affects ordinary steel fasteners.
The zinc electroplating provides sacrificial corrosion protection, while the smooth rolled edges prevent the clamp band from cutting into the hose surface during installation and throughout service.
The DZ93259190954 clamp is installed using appropriate pliers that compress the formed ears, expanding the band to slide over the hose and fitting before releasing to apply clamping force.
The clamp should be positioned squarely on the hose, with the band fully covering the barbed portion of the fitting. Improper positioning may not provide adequate retention and can allow leakage.
Each production batch of DZ93259190954 clamps undergoes dimensional verification and clamping force testing to ensure consistent retention force across the specified diameter range.
The spring steel material is tested for hardness and elasticity to confirm it will maintain its clamping characteristics through repeated thermal cycles and extended service periods.
Rust staining on the DZ93259190954 clamp indicates the zinc plating has been compromised. Severely corroded clamps may have reduced cross‑section and diminished clamping force.
A clamp that has lost its spring tension will feel loose and may show visible gaps between the band and hose surface. Such clamps cannot maintain adequate sealing pressure.
During system service, all accessible clamps should be inspected for condition and tension. Replacing aged or corroded clamps with new units is inexpensive insurance against hose connection failures.
The DZ93259190954 clamp is dimensioned for small‑diameter hose connections used in designated locations on the Shacman X5000 cooling, air, and fluid systems.
Fleet workshops should maintain an inventory of these clamps in various sizes for system repairs. Using the correct size and type of clamp ensures proper hose retention and leak prevention.
Aftermarket clamps with incorrect tension or inferior plating can fail without warning. We supply only the authentic Shacman X5000 Clamp (S) DZ93259190954 manufactured to OEM specifications.
These clamps are packaged in convenient workshop quantities. The part number DZ93259190954 is clearly printed on the packaging for rapid identification and reordering.
Our international distribution network ensures genuine DZ93259190954 small clamps are always available for dispatch to dealerships and fleet facilities worldwide.
Multi‑pack of small clamps in workshop quantity. Zinc‑plated for corrosion protection during storage until installation.
Expert guidance on clamp selection and installation techniques. We help ensure your DZ93259190954 clamps provide secure hose retention.
For current stock availability on the genuine Clamp (S) DZ93259190954, please use the contact buttons above.
