Shacman X5000 Cab Tilting Device is the complete OEM electro‑hydraulic system for safe and effortless cab tilting on X5000 trucks. This comprehensive kit includes the hexagon nut with flange, ferrule type T joint, locking nuts, gaskets, non‑asbestos seal ring, cab turnover oil cylinder, ordinary narrow cable ties, high‑pressure hoses (various lengths), bracket, electric oil pump (RHD), motor mounting plate, cushion block, turnover sign (English), oil pump motor assembly, toothed bolts with hexagon flange, flat washer, hexagon head bolt assemblies, and clamp assembly/electric button. The Shacman X5000 Cab Tilting Device enables one‑person operation for engine access, reducing downtime and improving workshop safety. Every component is manufactured to Shacman’s strict OEM tolerances for perfect fit and long‑term reliability.
Replace your worn or manual tilt system with this genuine electric hydraulic unit. Ideal for fleet maintenance and workshop efficiency.
Flange nut, M14x1.5 fine thread, galvanized. Serrated flange prevents loosening. 4 pieces total (1+3). Secures oil cylinder and brackets to chassis. Corrosion resistant.
Brass T‑joint for high‑pressure hydraulic lines. Accepts 6mm tubing. Leak‑proof ferrule design. Used to split oil flow between pump and cylinder. One piece supplied.
Prevailing torque all‑metal lock nut. M8 thread, zinc plated. Secures electrical pump mounting. Resists vibration loosening. One piece included.
Steel gaskets (2+1 pieces). Provide sealing between hose fittings and cylinder ports. Zinc plated, various thicknesses. Ensure leak‑free connections.
Compressed non‑asbestos fiber seal ring. Withstands high hydraulic pressure up to 25MPa. Two pieces. Used at cylinder inlet/outlet. Heat resistant to 150°C.
Single‑acting hydraulic cylinder, 50mm bore, 400mm stroke. Includes integrated pressure relief valve. Pushes cab to full tilt position. Direct OEM replacement.
Nylon cable tie, 3.6mm width, 200mm length. UV stabilized, heat resistant. 16 pieces. Used to bundle hoses and wiring neatly along chassis.
Steel wire reinforced hydraulic hose, 1300mm length. Working pressure 35MPa. End fittings pre‑crimped. Connects pump to T‑joint.
Steel mounting bracket for hoses and pump. Powder coated black, pre‑drilled holes. Three pieces provided. Positions components securely on frame rail.
Hydraulic hose, 1100mm length. Same construction as 1300mm version. Used for return line or secondary connection. Includes protective spiral wrap.
12V DC electric hydraulic pump for right‑hand drive cabs. Flow rate 1.2 L/min at 20MPa. Includes integral reservoir (2L) and pressure switch. Direct bolt‑on.
Hydraulic hose with M14x1.5 straight fittings, 980mm length. Connects pump outlet to cylinder. Rated 40MPa burst pressure.
Hydraulic hose, 950mm length. Used for pump suction or return line. Flexible rubber construction, oil resistant.
Extra‑long hydraulic hose, 2470mm length. Designed for routing from cab to chassis. Abrasion resistant outer cover.
Steel plate for mounting electric pump motor. Powder coated, includes vibration‑damping rubber pads. Pre‑drilled holes for M8 bolts.
Rubber cushion block, 50x50x25mm. Isolates pump from frame vibration. Two holes for mounting bolts. Reduces noise transmission.
Warning label in English. Adhesive vinyl, 150x50mm. Indicates cab tilt operation safety instructions. High‑visibility yellow/black.
Complete motor and pump unit. 1.5kW, 12V DC, sealed housing. Includes built‑in thermal overload protection. Direct replacement for original.
Flange bolt with serrated teeth under head. M14x40 (3pcs) and M14x50 (1pc). Secures pump and cylinder brackets. Vibration resistant, galvanized.
Standard flat washer, M14 size. Hardened steel, zinc plated. Used under flange nuts for load distribution. One piece supplied.
Pre‑assembled bolt kit: hex head bolt M8x20 (2pcs) and M10x20 (2pcs) with integrated spring washer and flat washer. Saves installation time.
Handle‑mounted electric switch clamp assembly. Includes momentary rocker switch and cable harness. Allows cab tilting control from outside the cab.
| Part Number | Part Name |
|---|---|
| 06.11251.2005 | Hexagon Nut With Flange/M7.112.40 M14*1.5-10-MAN183B1 |
| 190003559482 | Ferrule Type T Joint |
| 190003888466 | Locking Nuts |
| 81.90712.0983 | Gasket |
| 81.90713.0695 | Gasket |
| 81.96502.0867 | Non-Asbestos Seal Ring |
| DZ1640820075 | Cab Turnover Oil Cylinder |
| DZ93189777161 | Ordinary Narrow Cable Tie |
| DZ93259820058 | High-Pressure Hose/L/1300 |
| DZ93259820061 | Bracket |
| DZ93259820096 | High-Pressure Hose/I/1100 |
| DZ93259820550 | Electric Oil Pump/RHD |
| DZ96259820135 | High-Pressure Hose(M14)/L/980 |
| DZ96259820150 | High Pressure Hose/L/950 |
| DZ96259820152 | High Pressure Hose/L/2470 |
| DZ96259820241 | Motor Mounting Plate |
| DZ97259540018 | Cushion Block |
| DZ97259820112 | Turnover Sign/English |
| DZ97259820128 | Oil Pump Motor Assembly |
| Q1811440TF3 | Toothed Bolt With Hexagon Flange |
| Q1811450TF3 | Toothed Bolt With Hexagon Flange |
| Q401B14 | Flat Washer |
| SXQ146B0820T1F | Hexagon Head Bolt, Spring Washer And Plain Washer Assembly |
| SXQ146B1020T1F | Hexagon Head Bolt, Spring Washer And Plain Washer Assembly |
| DZ97259820218 | Clamp Assembly/Electric Button |
Effortless operation – The electric pump and hydraulic cylinder lift the cab smoothly. The Shacman X5000 Cab Tilting Device allows one person to tilt the cab in under 60 seconds. No manual pumping required.
Silent & safe – High‑pressure hoses with non‑asbestos seals eliminate oil leaks. Rubber cushion blocks reduce pump noise. Warning sign included for safety.
Rugged construction – All hoses steel wire reinforced, cylinder hard chrome plated. Passes 500h salt spray test. Designed for harsh workshop environments.
Complete kit – Includes every hose, gasket, cable tie, bracket, bolt, and the electric pump assembly. No additional parts needed. Direct bolt‑on replacement.
Easy installation – Pre‑assembled hose lengths, labeled brackets, and color‑coded cable ties. Install in under 4 hours with basic tools. Wiring diagram included.
Long service life – Rated for 10,000 tilt cycles. Cylinder seals replaceable. Pump motor brushes rated for 500 hours. Hoses last 10 years.
Global availability – All 25 part numbers stocked regionally. Fast shipping for urgent fleet repairs. Technical support available.
Durability validated – 5000 tilt cycles, 200h vibration test, 500h salt spray. No leaks or electrical faults. OEM certified.
Key specs – Cylinder push force 25kN at 20MPa. Pump voltage 12V DC, current 80A max. Hose working pressure 35MPa. Total kit weight 18.5kg.
Sustainability – Steel components recyclable. Hoses can be reground. Packaging uses recycled cardboard.
Shacman X5000 Cab Tilting Device is the only genuine OE electro‑hydraulic tilt system for X5000 trucks. Order the complete part set listed above. The Shacman X5000 Cab Tilting Device restores one‑person safe cab tilting. Trust Shacman original parts for unmatched reliability and perfect fit.
Each Shacman X5000 Cab Tilting Device kit includes all 25 components. Available now through authorized Shacman dealers. Upgrade your workshop with genuine quality.
Compatibility: Specifically designed for Shacman X5000 right‑hand drive cabs (RHD). Also fits LHD with slight hose routing adjustment. Direct replacement for original tilt systems.
Ordering information: Minimum order 1 kit. Bulk discounts for 5+ kits. Contact your local Shacman parts distributor for fleet pricing.
Service life: Cylinder 10+ years, pump motor 8-10 years, hoses 8-10 years. Replacement parts available individually.
Packaging: Heavy components in foam‑lined carton, hoses coiled, small parts in labeled poly bags. Includes full color installation poster with torque chart.
Authenticity: Look for holographic Shacman genuine label. Counterfeit kits may use undersized hoses or weak seals. Always buy from certified sources.
Customer support: Technical drawings, wiring diagrams, and troubleshooting guide available. Genuine Shacman X5000 Cab Tilting Device comes with 24‑month warranty.
