Shacman X5000 Cab Tilting Device
Shacman X5000 Cab Tilting Device
2026-06-13
Shacman X5000 2020060-Oil Pump Motor Assembly
Shacman X5000 2020060-Oil Pump Motor Assembly
2026-06-13

Shacman X5000 Oil Pump Motor Assembly

Shacman X5000 Oil Pump Motor Assembly | OEM Hydraulic Tilt Motor

Shacman X5000 Oil Pump Motor Assembly is the original equipment power unit for the cab tilting system on X5000 trucks. This assembly integrates a high‑torque 12V DC motor, a precision hydraulic gear pump, and a 2‑liter oil reservoir into a single sealed housing. The Shacman X5000 Oil Pump Motor Assembly delivers reliable hydraulic pressure to lift the cab smoothly and safely. Designed for right‑hand drive (RHD) X5000 cabs, this unit replaces worn or failed pumps, restoring one‑person cab tilting capability. Every component is manufactured to Shacman’s strict OEM tolerances for perfect fit and long service life.

Restore effortless, safe cab tilting with this genuine motor pump assembly. Ideal for fleet maintenance and workshop efficiency.

Precision Component of Shacman X5000 Oil Pump Motor Assembly

Oil Pump Motor Assembly

Complete electro‑hydraulic unit: 12V DC permanent magnet motor coupled to a gear pump. Integrated 2L reservoir, pressure relief valve (25MPa), and thermal overload protector. Sealed to IP67, corrosion‑resistant housing. Direct OEM replacement for RHD X5000 cab tilt systems. Includes mounting bracket and power pigtail. Flow rate 1.2 L/min at 20MPa. Delivers 2500kg push force to hydraulic cylinder.

Shacman X5000 Oil Pump Motor Assembly with integrated motor, pump and reservoir
Shacman X5000 Oil Pump Motor Assembly — complete OEM electro‑hydraulic power unit

Product Parameters of Shacman X5000 Oil Pump Motor Assembly

Part NumberPart Name
2020060-DZ97259820128Oil Pump Motor Assembly

Why Choose Our Shacman X5000 Oil Pump Motor Assembly?

Powerful & reliable – The Shacman X5000 Oil Pump Motor Assembly delivers 1.2 L/min at 20MPa, lifting the cab in under 60 seconds. Thermal overload protection prevents burnout.

Quiet operation – Rubber mounting isolators and precision‑machined gears reduce noise. No whining or excessive vibration during tilting.

All‑weather durability – IP67 sealed, corrosion‑resistant housing. Works from -40°C to +80°C. Withstands road salt, moisture, and dust.

Direct replacement – Identical to original Shacman part. Bolt‑on installation using existing brackets. Includes O‑rings and mounting hardware.

Material & construction – Motor housing: die‑cast aluminum, powder coated black. Pump gears: hardened steel. Reservoir: high‑density polyethylene. All seals: nitrile rubber, fuel and oil resistant.
Extreme environment testing – 2000h salt spray (no corrosion), 500h thermal cycling (-40°C to +80°C), 1,000,000 start/stop cycles. Maintains flow rate within ±5% of spec.

Easy installation – Pre‑filled with hydraulic oil (ISO VG 32). Connect two hoses and electrical power. Bleed procedure not required. Install in under 30 minutes.

Long service life – Rated for 10,000 tilt cycles (equivalent to 20 years of daily use). Motor brushes rated for 500 operating hours. Pump wear parts replaceable.

Global availability – Part number 2020060-DZ97259820128 stocked in regional warehouses. Fast shipping for urgent fleet repairs.

Installation guide for Shacman X5000 Oil Pump Motor Assembly: Disconnect battery negative. Remove old pump motor. Install new unit using original brackets and bolts. Connect pressure and return hoses to corresponding ports. Attach electrical connector (12V DC, 80A fused). Secure reservoir cap. Reconnect battery. Test tilt function. The Shacman X5000 Oil Pump Motor Assembly is now ready. Check for leaks after first operation.

Durability validated – 5,000 continuous tilt cycles, 1,000h vibration (ISO 16750-3), 500h salt spray (ASTM B117). No performance degradation. OEM certified.

Technical specifications – Voltage: 12V DC. Max current: 80A. Flow rate: 1.2 L/min @ 20MPa. Reservoir capacity: 2.0L. Weight: 5.8kg. Dimensions: 280x180x160mm.

Sustainability – Aluminum housing fully recyclable. Reservoir polyethylene recyclable. Low standby power consumption (0.02W).

Why genuine over aftermarket – Aftermarket pump motors often have lower flow rate, inadequate thermal protection, or poor seals that leak. The Shacman X5000 Oil Pump Motor Assembly matches the original flow and pressure curves exactly, ensuring the cab tilts fully and safely. Genuine units also include proper over‑pressure relief to prevent cylinder damage.
Fleet benefits – Standardize on Shacman X5000 Oil Pump Motor Assembly to reduce cab tilt downtime. One part number for all X5000 RHD trucks. Quick change‑out improves workshop productivity.
Quality assurance – 100% motor run test, pump flow calibration, pressure test (25MPa for 30s). ISO 9001:2025 certified assembly line.
Safety features – Automatic pressure relief valve prevents over‑tilting. Thermal overload cuts power at 120°C. Reverse polarity protected.
Maintenance tip – Check oil level annually (sight glass on reservoir). Replace oil every 1000 tilt cycles or 5 years. Inspect electrical connector for corrosion. Keep vent hole on cap clean.
Performance advantage – A genuine Shacman X5000 Oil Pump Motor Assembly ensures the cab tilts to full height (55°) without hesitation. Reduces driver/mechanic fatigue and prevents manual pumping injuries.

Shacman X5000 Oil Pump Motor Assembly is the only genuine OE power unit for the cab tilt system. Order part number 2020060-DZ97259820128. The Shacman X5000 Oil Pump Motor Assembly restores effortless, safe cab lifting. Trust Shacman original parts for unmatched reliability and perfect fit.

Each Shacman X5000 Oil Pump Motor Assembly is a complete drop‑in replacement. Available now through authorized Shacman dealers. Upgrade your workshop with genuine quality.

Compatibility: Specifically designed for Shacman X5000 right‑hand drive cabs (RHD). Also works on left‑hand drive with minor hose rerouting. Direct replacement for DZ97259820128 and 2020060 variants.

Ordering information: Minimum order 1 unit. Bulk discounts for 5+ units. Contact your local Shacman parts distributor for fleet pricing.

Service life: 10+ years typical. Motor brushes can be replaced by authorized service centers. Pump cartridge replaceable separately.

Packaging: Pump assembly foam‑wrapped in heavy‑duty carton. Includes sealing washers, mounting bolts, and quick installation guide.

Authenticity: Look for holographic Shacman genuine label on housing. Counterfeit units often have lower flow and no thermal protection. Always buy from certified sources.

Customer support: Technical drawings, wiring diagrams, and seal kit available. Genuine Shacman X5000 Oil Pump Motor Assembly comes with 24‑month unlimited‑hours warranty.

Pump displacement: 1.6 cc/rev. Motor speed: 3000 rpm at 20MPa. Volumetric efficiency >90%.
Duty cycle: 10% (max 1 minute continuous, 9 minutes rest). Suitable for intermittent cab tilting operations.
Low emissions: No hazardous substances. Meets RoHS and REACH requirements.
Winter performance: Hydraulic oil ISO VG 32 remains pumpable down to -40°C. Motor torque unaffected by cold. Seals retain flexibility.
Cleaning care: Wash exterior with damp cloth. Do not pressure wash electrical connector. Keep reservoir vent clean of debris.
Interchangeability: Direct replacement for original Shacman pump motor. Supersedes all previous part numbers. Compatible with existing hoses (M14x1.5 fittings).
Emergency repair: Motor and pump sections not separately serviceable in field – replace whole unit. Seal kit available for minor leaks.
Complete peace of mind – When you install the Shacman X5000 Oil Pump Motor Assembly, you restore the heart of your cab tilting system. Reliable hydraulic power, thermal protection, and corrosion‑resistant construction ensure years of trouble‑free service. Backed by Shacman’s global parts network and technical support.
Genuine Shacman parts — Shacman X5000 Oil Pump Motor Assembly | Engineered for effortless cab tilting

Hot Sale Genuine Shacman X5000 Parts

Shacman X5000 Online Catalog

2026-06-03

Shacman X5000 Tool Box

Shacman X5000 Work Light Clamp Seat Assembly – OEM-grade clamp & square nut for durable truck lighting.
2026-06-08

Shacman X5000 Left Side Wall Window Assembly

Shacman X5000 Work Light Clamp Seat Assembly – OEM-grade clamp & square nut for durable truck lighting.
2026-06-12

Shacman X5000 Sunroof Cover Mounting Bracket Assembly

Shacman X5000 Work Light Clamp Seat Assembly – OEM-grade clamp & square nut for durable truck lighting.
2026-06-08

Shacman X5000 Window Glass

Shacman X5000 Work Light Clamp Seat Assembly – OEM-grade clamp & square nut for durable truck lighting.
2026-05-29

Shacman X5000 Guide Plate Assembly

Shacman X5000 Work Light Clamp Seat Assembly – OEM-grade clamp & square nut for durable truck lighting.
2026-06-03

Shacman X5000 Master Power Switch

Shacman X5000 Work Light Clamp Seat Assembly – OEM-grade clamp & square nut for durable truck lighting.
Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
Connecting...
Please leave your inquiry and your phone. We will give you feedback within 12 hours.
Our operators are busy. Please try again later
:
:
:
:
Have you got question? Write to us! Please leave your phone or what'sApp
:
:
This chat session has ended