Left Front Damping Pad
Демпфирующая Прокладка
Almohadilla Amortiguadora
OEM Left Front Damping Pad DZ96259592009 precision‑molded for the Shacman X5000 heavy‑duty truck. This essential DZ96259592009 cushioning component absorbs vibration and isolates noise at the front left chassis mounting point.
Manufactured from high‑performance elastomeric material with excellent compression set resistance, the Left Front Damping Pad DZ96259592009 maintains its isolation properties through years of continuous vehicle operation.
Replacing a worn or hardened damping pad with the genuine DZ96259592009 component restores proper vibration control and prevents the metal‑to‑metal contact that causes noise and accelerated wear.
| Parameter | Specification |
|---|---|
| OEM Part Number | DZ96259592009 |
| Product Name | Left Front Damping Pad |
| Brand / Model | Shacman X5000 |
| Material | Natural Rubber with Fabric Reinforcement |
| Pad Dimensions | 110.00 mm × 75.00 mm × 12.00 mm |
| Hardness | 60 Shore A |
| Operating Temperature | -40°C to +100°C |
| Mounting Type | Captive between chassis components |
| Compression Set | ≤ 25% after 22 hours at 70°C |
| Application | Shacman X5000 front left chassis vibration isolation |
The DZ96259592009 left front damping pad is a critical component in the Shacman X5000 noise and vibration management system. It acts as a compliant barrier between structural chassis members, absorbing vibration energy.
Engine vibration, road surface irregularities, and driveline oscillations generate a wide spectrum of frequencies that travel through the chassis structure. Damping pads convert this mechanical energy into negligible heat.
The Left Front Damping Pad DZ96259592009 is specifically positioned at the front left chassis interface, where it isolates the cab mounting point from frame‑borne vibrations that would otherwise transmit directly into the driver compartment.
The DZ96259592009 pad is manufactured from natural rubber, a material selected for its excellent damping properties and ability to absorb vibration across a broad frequency range without transmitting resonance peaks.
An internal fabric reinforcement layer provides dimensional stability under compressive loads, preventing the pad from extruding or permanently deforming under the sustained clamping force of the bolted joint.
The DZ96259592009 pad is installed between the mating surfaces of the chassis components at the designated left front location. It is typically held in place by the clamping force of the assembly bolts.
The mating surfaces must be clean and free of rust or debris before pad installation. Any particles trapped between the pad and the metal surfaces create hard points that reduce the effectiveness of the vibration isolation.
Each production batch of DZ96259592009 pads is tested for hardness, tensile strength, and elongation at break. These physical properties must fall within specified ranges to ensure consistent damping performance.
Compression set testing verifies that the material recovers adequately after prolonged compressive loading. The pad must not take a permanent set that would reduce its thickness and isolation effectiveness over time.
A hardened or cracked DZ96259592009 pad has lost its ability to absorb vibration effectively. The driver may notice increased cab noise or vibration, particularly at certain engine speeds or road conditions.
A pad that has extruded from between the mating surfaces or shows permanent compression indicates that the material has exceeded its elastic limit. Such pads must be replaced to restore proper isolation.
During chassis inspections or when components are disassembled for other service, the damping pads should be examined for condition. Replacing worn pads with new Left Front Damping Pad DZ96259592009 units is preventive maintenance.
The DZ96259592009 pad is specifically designed for the left front mounting position on the Shacman X5000 chassis. It is dimensioned to fit correctly at this designated location without trimming or modification.
Fleet workshops should maintain an inventory of these damping pads for replacement during chassis service operations. Timely pad replacement maintains cab comfort and prevents the progressive wear that vibration causes.
Aftermarket damping pads with incorrect material properties can transmit excessive vibration. We supply only the authentic Shacman X5000 Left Front Damping Pad DZ96259592009 manufactured to OEM specifications.
Each pad is individually packaged to protect against contamination and ozone degradation during storage. The part number DZ96259592009 is clearly printed on the packaging label for immediate identification.
Our international supply chain ensures that genuine DZ96259592009 damping pads are available for immediate dispatch to dealerships and fleet maintenance facilities across all major continents.
Single left front damping pad with fabric reinforcement. Protective packaging preserves material properties until installation.
Expert guidance on damping pad installation and vibration isolation principles. We help ensure your DZ96259592009 pads deliver effective noise and vibration reduction.
For current stock availability and pricing on the genuine Left Front Damping Pad DZ96259592009, please use the contact buttons above.
