Fastener Gp
Крепёжный Комплект
Kit de Sujeción
OEM Fastener Gp DZ97259540304 assembled to exact Shacman X5000 specifications. This complete DZ97259540304 hardware kit provides the bolts, nuts, washers, and clips required for secure component mounting across various chassis locations.
Each piece in the Fastener Gp DZ97259540304 is manufactured from high‑strength steel with corrosion‑resistant plating, ensuring consistent clamp loads and resistance to the under‑chassis environment.
Using the genuine DZ97259540304 kit ensures all fasteners meet the specified grade and plating requirements, preventing the mixed‑hardware issues that compromise joint integrity.
| Parameter | Specification |
|---|---|
| OEM Part Number | DZ97259540304 |
| Product Name | Fastener Gp |
| Brand / Model | Shacman X5000 |
| Kit Contents | Bolts, nuts, flat washers, spring washers, retaining clips |
| Fastener Grades | 8.8 and 10.9 grade carbon steel |
| Plating Type | Zinc‑Nickel electroplating, 600 hours salt spray |
| Thread Sizes Included | M6, M8, M10, M12 |
| Quantity per Kit | Complete set for designated chassis assembly |
| Packaging | Compartmented box with labeled sections |
| Application | Shacman X5000 chassis and component bolted connections |
The DZ97259540304 fastener kit provides a complete, application‑specific hardware set for securing designated components on the Shacman X5000. It eliminates the guesswork of sourcing individual fasteners.
Each bolt, nut, and washer in the kit is manufactured to the precise grade, thread specification, and plating requirement for its intended location, ensuring consistent clamping force and corrosion protection.
Using the correct Fastener Gp DZ97259540304 hardware prevents the mismatched fasteners that cause loose joints, galvanic corrosion, or thread failure under the vibration loads of heavy‑duty operation.
The DZ97259540304 fasteners are manufactured from 8.8 and 10.9 grade carbon steel, providing the tensile strength necessary to maintain clamp loads under the dynamic forces of vehicle operation.
Zinc‑nickel electroplating delivers superior corrosion resistance compared to standard zinc, withstanding 600 hours of salt spray exposure. This plating also provides a consistent coefficient of friction for accurate torque application.
All fasteners in the DZ97259540304 kit must be tightened to the torque values specified in the Shacman service manual. A calibrated torque wrench ensures proper clamp load and prevents joint failure.
Threads should be clean and lightly lubricated before assembly. The correct tightening sequence must be followed for multi‑bolt joints to distribute clamping force evenly.
Each production batch of DZ97259540304 fasteners is sampled for dimensional verification, hardness testing, and plating thickness measurement to ensure conformance to engineering specifications.
Proof load testing verifies that bolts meet their designated grade strength requirements without permanent deformation, ensuring reliable performance in critical chassis connections.
Rust staining around bolt heads indicates that plating has been compromised. Corroded fasteners lose clamping force and become difficult to remove during subsequent service operations.
Loose or missing fasteners allow component movement that elongates mounting holes and causes structural damage. During inspections, all accessible hardware should be checked for proper torque.
When replacing components, always use new fasteners from the genuine Fastener Gp DZ97259540304 kit rather than reusing old hardware that may have lost its plating or been stretched beyond its elastic limit.
The DZ97259540304 kit is compiled for specific assembly locations on the Shacman X5000. Its contents match the factory bill of materials for the designated chassis mounting points.
Fleet workshops should maintain these kits to ensure correct hardware is always available, reducing the risk of improper substitutions during maintenance and repair procedures.
Aftermarket hardware with unknown grade or plating can fail in critical applications. We supply only the authentic Shacman X5000 Fastener Gp DZ97259540304 manufactured to OEM specifications.
Each kit is packaged in a compartmented box with labeled sections. The part number DZ97259540304 is clearly printed on the packaging for immediate identification.
Our international logistics network ensures genuine DZ97259540304 fastener kits are available for dispatch to dealerships and fleet facilities worldwide.
Complete fastener kit in compartmented box with labeled sections. Includes bolts, nuts, washers, and clips for designated assembly.
Expert guidance on fastener selection and torque procedures. We help ensure your DZ97259540304 hardware provides secure bolted connections.
For current stock availability on the genuine Fastener Gp DZ97259540304, please use the contact buttons above.
