Cab Turnover Shaft Right Support Assembly/RHD
Правая Опора Вала Опрокидывания Кабины ПР
Soporte Derecho Eje Basculante Cabina RHD
This OEM cab turnover shaft right support assembly/RHD (part 81.41720.5342) is a precision-engineered structural component designed specifically for the Shacman X5000 right-hand drive cab tilting system. The 81.41720.5342 assembly provides critical pivot support and secure mounting for the cab turnover shaft on the right side of the vehicle.
Manufactured from high-strength structural steel with precision-machined bearing housing and reinforced mounting flanges, this 81.41720.5342 assembly withstands extreme cyclic loading, cab weight forces, and continuous operational stress during repeated cab tilting operations for engine access and maintenance procedures.
Replacing a worn, damaged, or corroded support assembly with this genuine 81.41720.5342 component restores proper cab tilting functionality and pivot integrity. The OEM number guarantees exact dimensional specifications and factory-engineered material properties for the Shacman X5000 right-hand drive platform.
| Parameter | Specification |
|---|---|
| OEM Part Number | 81.41720.5342 |
| Product Name | Cab Turnover Shaft Right Support Assembly/RHD |
| Brand / Model | Shacman X5000 |
| Position | Right Side Cab Tilting Pivot Point, Right-Hand Drive Configuration |
| Material | High-Strength Structural Steel |
| Manufacturing Process | Precision Casting, CNC Machining, and Assembly |
| Surface Protection | Corrosion-Resistant Coating with Painted Finish |
| Function | Right Side Cab Tilting Pivot Support and Shaft Bearing Housing for RHD Vehicles |
The 81.41720.5342 cab turnover shaft right support assembly serves as a critical structural pivot component that supports the cab tilting shaft on the right side of right-hand drive Shacman X5000 commercial trucks.
This 81.41720.5342 assembly provides the bearing housing and rotational interface for the cab turnover shaft, enabling smooth and controlled cab tilting operations for engine access and routine vehicle maintenance procedures.
The precision-machined bearing housing of the 81.41720.5342 ensures proper shaft alignment and minimal rotational friction, reducing the effort required for cab tilting and preventing premature wear of mating pivot components during repeated use.
This 81.41720.5342 support assembly also distributes the substantial weight of the cab structure evenly across the chassis mounting points, preventing localized stress concentrations during both normal driving and cab tilting operations.
The assembly’s robust construction resists deformation under the combined static and dynamic loads of the fully equipped cab, ensuring consistent pivot geometry and reliable cab latching throughout the vehicle’s entire operational lifetime.
The 81.41720.5342 assembly is engineered specifically for right-hand drive vehicle configurations, ensuring proper cab tilt angle and clearance relationships for markets where RHD commercial vehicles are operated globally.
By providing reliable, low-friction pivot support for the cab tilting system on the right side, this assembly contributes to improved maintenance accessibility, reduced service time, and enhanced overall vehicle operational efficiency in demanding commercial transport applications.
The 81.41720.5342 support assembly is manufactured from high-strength structural steel with carefully controlled material specifications, providing exceptional load-bearing capacity for the substantial weight of the fully equipped truck cab.
The corrosion-resistant coating with painted finish of the 81.41720.5342 assembly provides excellent protection against rust, moisture, and environmental contaminants, ensuring long-term structural integrity in diverse operating environments.
The precision CNC machining process of the 81.41720.5342 ensures that the bearing housing bore and mounting surfaces meet exact dimensional specifications for perfect shaft alignment and reliable long-term pivot performance.
The assembly undergoes rigorous quality verification, including dimensional inspection, material certification, and bearing fitment testing to guarantee its performance in demanding cab tilting system applications where safety is paramount.
The material selection for the 81.41720.5342 assembly prioritizes both high compressive strength for cab weight support and excellent fatigue resistance for reliable performance under repeated cab tilting cycles throughout the vehicle’s service life.
The 81.41720.5342 assembly’s design has been validated through extensive load testing and vehicle durability trials to ensure it meets the highest safety standards for commercial vehicle cab tilting system components worldwide.
Replacement of the 81.41720.5342 cab turnover shaft right support assembly involves supporting the cab securely, disconnecting the tilting system components, removing the old support, and precisely installing the new assembly with OEM-specification fasteners.
After installation of the 81.41720.5342 assembly, verify that the cab tilting shaft rotates smoothly through its full range of motion and that the cab latches securely in both the driving and tilted positions before returning the vehicle to operation.
Regular inspection of the 81.41720.5342 assembly for bearing wear, pivot looseness, corrosion, or structural deformation is recommended as part of routine cab tilting system inspections during scheduled preventive maintenance intervals.
When installing the 81.41720.5342 assembly, it is essential to lubricate the bearing surfaces with the specified grease type and to follow the manufacturer’s torque specifications for all mounting fasteners to ensure secure long-term retention.
It is also recommended to inspect the cab turnover shaft, bushings, and related tilting system components when replacing the 81.41720.5342 assembly to ensure complete system reliability and prevent premature wear of newly installed parts.
During inspection, pay special attention to the bearing housing bore and mounting flange surfaces of the 81.41720.5342 assembly for signs of cracking, elongation, or fretting that indicate structural stress requiring immediate corrective action.
Each 81.41720.5342 cab turnover shaft right support assembly undergoes comprehensive dimensional inspection, bearing bore verification, and surface finish evaluation to ensure it meets OEM specifications without any deviation from engineering design standards.
We provide full quality documentation for every 81.41720.5342 assembly, including material certifications and inspection reports to satisfy fleet maintenance documentation and cab tilting system repair shop quality assurance requirements.
The assembly is tested for structural load capacity, including static cab weight simulation testing to verify its ability to withstand the maximum rated support forces specified by the vehicle manufacturer for safe operation under all conditions.
Our quality control process includes dimensional verification of the bearing housing bore on the 81.41720.5342 assembly to ensure proper shaft fitment and smooth rotational operation without excessive clearance or binding during cab tilting procedures.
We maintain full traceability of all materials used in the 81.41720.5342 assembly, from raw steel certification to finished precision component, ensuring complete accountability throughout the entire manufacturing supply chain process.
Visible cracking, bending, or structural deformation of the 81.41720.5342 support assembly indicates overload or fatigue damage and requires immediate replacement to restore proper cab tilting pivot integrity and safe cab support during operation.
Excessive bearing wear, pivot looseness, or difficulty in cab tilting operation on the 81.41720.5342 assembly also warrants replacement to restore smooth, controlled cab movement and prevent binding during essential maintenance procedures.
If the cab exhibits uneven tilting, misalignment, or failure to latch securely in the driving position, the 81.41720.5342 assembly should be inspected and replaced if pivot damage or bearing failure is confirmed through detailed dimensional examination.
Following any collision damage, cab impact event, or improper cab tilting procedure, the 81.41720.5342 assembly should be thoroughly inspected for hidden damage and replaced if any distortion or structural compromise is detected during examination.
If the assembly shows signs of severe corrosion at the bearing housing or mounting flange areas that could affect structural integrity, it should be replaced to ensure continued safe cab tilting operation and secure cab retention during driving.
Routine commercial vehicle cab tilting system inspections should include a detailed functional and visual examination of the 81.41720.5342 assembly to identify potential issues before they compromise cab tilting safety and operational reliability.
Aftermarket cab tilting components with incorrect specifications or inferior material quality can lead to cab pivot failure, unsafe tilting operations, and potential cab detachment during maintenance procedures. We supply only authentic components like the 81.41720.5342 built to exact OEM specifications.
The part number 81.41720.5342 is clearly marked for verification. Our international logistics network ensures secure heavy-duty packaging and prompt dispatch to any global destination with complete export documentation and customs clearance support.
All orders for 81.41720.5342 include comprehensive quality documentation, ensuring compliance with local import regulations and fleet maintenance record requirements in your country of vehicle operation.
We offer competitive pricing and reliable freight shipping options for the 81.41720.5342 assembly, making it convenient for our global customers to maintain their Shacman X5000 right-hand drive vehicle cab tilting systems in safe and fully functional working condition.
Our dedicated customer service team is ready to assist with any technical or logistical questions regarding the 81.41720.5342 assembly, from cab tilting system repair consultations to bulk fleet order processing and international shipping coordination.
Complete 81.41720.5342 cab turnover shaft right support assembly/RHD. Ready for professional installation with precision-machined bearing housing and corrosion-resistant protective coating for long service life.
Expert guidance on cab tilting system repair procedures and proper installation of the 81.41720.5342 assembly is available. We help ensure proper cab pivot function for your Shacman X5000 RHD vehicle.
Full quality documentation for 81.41720.5342 is available upon request, including material certifications and dimensional inspection reports for your permanent maintenance records.
For current stock availability of the genuine 81.41720.5342 cab turnover shaft right support assembly/RHD, please use the contact buttons above.
