Fuel/Water Temperature Sensor / WP13
Датчик Температуры WP13
Sensor de Temperatura WP13
OEM Fuel/Water Temperature Sensor / WP13 / With Water Level Sensor DZ61139019001 precision‑calibrated for the Shacman X5000 WP13 engine. This integrated DZ61139019001 unit monitors fuel temperature, coolant temperature, and coolant level for comprehensive engine protection.
Featuring robust thermistor elements and a sealed connector, the Fuel/Water Temperature Sensor / WP13 / With Water Level Sensor DZ61139019001 delivers accurate data to the engine control module under all operating conditions.
Replacing a faulty sensor with the genuine DZ61139019001 component restores proper engine monitoring and prevents the overheating and fuel system issues caused by incorrect temperature data.
| Parameter | Specification |
|---|---|
| OEM Part Number | DZ61139019001 |
| Product Name | Fuel/Water Temperature Sensor / WP13 / With Water Level Sensor |
| Brand / Model | Shacman X5000 |
| Compatible Engine | WP13 Diesel Engine Series |
| Measurement Functions | Fuel temperature, coolant temperature, coolant level |
| Sensor Element Type | NTC thermistor with sealed housing |
| Electrical Connector | Multi‑pin sealed connector |
| Operating Temperature Range | -40°C to +150°C |
| Mounting Thread | M14 × 1.5 mm with sealing washer |
| Application | Shacman X5000 WP13 engine temperature and coolant level monitoring |
The DZ61139019001 sensor combines three critical monitoring functions into one unit. It measures fuel temperature for injection quantity correction, coolant temperature for engine protection, and coolant level for low‑fluid warning.
Accurate fuel temperature data allows the engine control module to adjust injection timing and quantity based on fuel density changes, optimizing combustion efficiency across varying operating conditions.
The integrated water level sensor provides early warning of coolant loss, allowing the driver to address the issue before the engine overheats and sustains costly damage from coolant system failure.
The DZ61139019001 sensor uses NTC thermistor elements that provide precise, repeatable resistance changes proportional to temperature, enabling accurate monitoring across the full engine operating range.
The sealed multi‑pin connector and robust housing protect the sensing elements from coolant, oil, and environmental contamination, ensuring reliable signal output throughout the sensor’s service life.
The DZ61139019001 sensor threads into the engine’s designated port. The sealing washer must be replaced at each installation, and the sensor torqued to specification to prevent coolant leakage.
The electrical connector must be fully seated with the locking tab engaged. After replacement, the engine control module may require initialization to recognize the new sensor calibration.
Every DZ61139019001 sensor undergoes multi‑point calibration verification using reference temperature baths to ensure resistance values meet the specified tolerance across the measurement range.
The water level sensing circuit is functionally tested to confirm proper switching at the specified fluid level thresholds, providing reliable low‑coolant detection during engine operation.
Erratic temperature readings or diagnostic trouble codes related to fuel temperature or coolant temperature circuits indicate a potential DZ61139019001 sensor failure requiring investigation.
A false low‑coolant warning that persists after verifying the coolant level suggests a malfunction in the water level sensing portion of the sensor assembly, warranting replacement.
Corrosion on the connector terminals or coolant seepage at the sensor mounting point can cause intermittent signals. The sensor and its sealing washer should be inspected during engine service.
The DZ61139019001 sensor is specifically calibrated for the WP13 engine series in the Shacman X5000, with connector pin assignments and temperature curves matching this engine management system.
Fleet operators should maintain spare sensors to minimize downtime when temperature or level monitoring faults occur, as accurate engine data is essential for reliable operation and emissions compliance.
Aftermarket sensors with unverified calibration can cause incorrect engine management decisions. We supply only the authentic Shacman X5000 Fuel/Water Temperature Sensor / WP13 / With Water Level Sensor DZ61139019001.
Each sensor is factory‑calibrated and sealed in protective packaging. The part number DZ61139019001 is clearly marked on the sensor body and packaging for immediate identification.
Our international logistics network ensures genuine DZ61139019001 sensors are available for dispatch to dealerships and fleet maintenance facilities across all major continents.
Complete multi‑function sensor assembly with sealing washer and connector. Factory‑calibrated and ready for installation into the WP13 engine.
Expert guidance on sensor installation and engine monitoring diagnostics. We help ensure your DZ61139019001 sensor provides accurate temperature and level data.
For current stock availability on the genuine Fuel/Water Temperature Sensor / WP13 / With Water Level Sensor DZ61139019001, please use the contact buttons above.
