Control Rod (X3000/F3000/M12/RH)
Тяга Управления Правая
Varilla de Control Der
OEM Control Rod (X3000/F3000/M12/RH) DZ97259240408 precision‑engineered for the Shacman X5000 transmission shift mechanism. This rigid DZ97259240408 right‑hand linkage rod transmits gear selection motion with precise linear transfer between components.
Manufactured from high‑strength steel with M12 threaded end fittings and durable coating, the Control Rod (X3000/F3000/M12/RH) DZ97259240408 provides the rigid mechanical connection essential for accurate shift gate positioning.
Replacing a bent or worn control rod with the genuine DZ97259240408 component restores proper shift linkage geometry and prevents the imprecise gear selection that causes transmission damage.
| Parameter | Specification |
|---|---|
| OEM Part Number | DZ97259240408 |
| Product Name | Control Rod (X3000/F3000/M12/RH) |
| Brand / Model | Shacman X5000 |
| Material | High‑Strength Steel with Black E‑coat |
| Rod Type | Rigid shift linkage rod with M12 threaded ends |
| Position | Right‑hand side transmission control |
| Thread Specification | M12 × 1.25 mm threaded ends |
| Compatible Models | X3000, F3000 series transmissions |
| Corrosion Protection | Electrophoretic coating, 480 hours salt spray rated |
| Application | Shacman X5000 transmission shift control linkage |
The DZ97259240408 control rod is a rigid mechanical link in the Shacman X5000 right‑hand side transmission shift linkage. It transfers linear motion from the shift actuator to the gear selection mechanism with precise displacement.
Unlike flexible cables that can stretch over time, rigid control rods provide direct mechanical connection with minimal lost motion, ensuring that shift lever movement translates accurately into transmission gear engagement.
The M12 threaded ends allow fine adjustment of the effective rod length, enabling precise calibration of the shift linkage geometry to match the transmission’s internal selector detent positions.
The DZ97259240408 rod is manufactured from high‑strength steel that resists bending under the repeated push‑pull forces of gear shifting, maintaining its straightness and dimensional accuracy throughout service.
The electrophoretic coating provides uniform corrosion protection across the entire rod surface, including the threaded areas where rust could seize the adjustment nuts and prevent future linkage service.
The DZ97259240408 control rod installs between the shift mechanism linkage arms using the M12 threaded ends. Lock nuts must be tightened after adjustment to prevent the rod length from changing during operation.
Rod length must be adjusted to achieve the specified transmission selector position when the shift lever is in each gear gate. Improper adjustment causes missed shifts and synchronizer wear.
Each production batch of DZ97259240408 control rods undergoes dimensional inspection to verify overall length, thread specifications, and straightness against engineering requirements for proper linkage function.
Coating thickness and adhesion testing ensure the e‑coat finish provides adequate protection for chassis‑mounted linkage components exposed to road spray and environmental conditions.
A bent DZ97259240408 rod alters the shift linkage geometry, causing difficulty engaging specific gears or the shift lever not centering properly in the neutral gate position.
Corroded or seized adjustment threads prevent proper linkage calibration during transmission service. Damaged threads may strip when tightening, requiring complete rod replacement.
During transmission service, the control rod should be inspected for straightness, thread condition, and coating integrity. Replacing damaged rods maintains proper shift linkage function and gear selection accuracy.
The DZ97259240408 rod is specifically configured for the right‑hand side of the Shacman X5000 transmission shift linkage, with rod length and M12 thread specification matching this vehicle platform.
Fleet workshops should maintain spare control rods and adjustment hardware for replacement during transmission service, ensuring continued precise gear selection and shift linkage reliability.
Aftermarket control rods with incorrect dimensions or thread specifications can cause shifting problems. We supply only the authentic Shacman X5000 Control Rod (X3000/F3000/M12/RH) DZ97259240408 built to OEM specifications.
Each control rod is individually packaged with thread protectors. The part number DZ97259240408 is clearly printed on the packaging for immediate identification and verification.
Our international logistics network ensures genuine DZ97259240408 control rods are available for dispatch to dealerships and fleet maintenance facilities worldwide.
Single right‑hand control rod with M12 threaded ends and e‑coat finish. Ready for installation with adjustment lock nuts.
Expert guidance on control rod installation and shift linkage adjustment. We help ensure your DZ97259240408 rod provides precise gear selection control.
For current stock availability on the genuine Control Rod (X3000/F3000/M12/RH) DZ97259240408, please use the contact buttons above.
