Fixing Bracket/Gear Selection And Shift Flexible Shaft
Кронштейн Тросов Переключения
Soporte de Cables de Cambio
OEM Fixing Bracket/Gear Selection And Shift Flexible Shaft DZ96319240524 precision‑formed for the Shacman X5000 transmission control system. This sturdy DZ96319240524 mounting component secures the gear selection and shift flexible shafts, maintaining proper cable routing and alignment.
Fabricated from high‑strength structural steel with durable anti‑corrosion coating, the Fixing Bracket/Gear Selection And Shift Flexible Shaft DZ96319240524 withstands vibration and the forces transmitted through the shift cables during operation.
Replacing a cracked or loose bracket with the genuine DZ96319240524 component restores proper shift cable support and prevents the linkage misalignment that causes imprecise gear selection.
| Parameter | Specification |
|---|---|
| OEM Part Number | DZ96319240524 |
| Product Name | Fixing Bracket/Gear Selection And Shift Flexible Shaft |
| Brand / Model | Shacman X5000 |
| Material | High‑Strength Structural Steel with Black E‑coat |
| Bracket Type | Formed steel support with dual cable mounting slots |
| Chassis Mounting Holes | 3‑hole pattern, 10.50 mm diameter |
| Cable Slot Width | 22.00 mm with retaining clip grooves |
| Material Thickness | 4.00 mm |
| Corrosion Protection | Electrophoretic coating, 480 hours salt spray rated |
| Application | Shacman X5000 shift and selection cable chassis mounting |
The DZ96319240524 fixing bracket anchors both the gear selection and shift flexible shaft cables to the Shacman X5000 chassis, providing secure termination points that enable precise transmission control.
Push‑pull control cables require rigid mounting at their outer conduit ends to function correctly. Without secure bracketing, cable movement absorbs the intended control motion instead of transferring it to the transmission.
The Fixing Bracket/Gear Selection And Shift Flexible Shaft DZ96319240524 positions both cables at the correct angle relative to the transmission shift mechanism, ensuring straight‑line cable travel without binding.
The DZ96319240524 bracket is fabricated from high‑strength structural steel with formed reinforcement features. The electrophoretic coating provides uniform corrosion protection across all surfaces.
The dual cable mounting slots include retaining clip grooves that securely capture each cable end fitting, preventing the cable from pulling through the bracket during gear selection and shift operations.
The DZ96319240524 bracket mounts to the chassis using three high‑strength bolts. Each flexible shaft cable end fitting slides into its designated slot and is secured with the retaining clip.
Cable routing must follow the original path to prevent sharp bends that increase shift effort. The bracket must be correctly oriented to ensure cables approach the transmission at the designed angle.
Each production batch of DZ96319240524 brackets undergoes dimensional inspection to verify slot positions, hole locations, and overall geometry against engineering specifications using precision measurement.
Coating thickness and adhesion testing ensure the e‑coat finish meets durability requirements for long‑term chassis service in demanding environmental conditions.
Rust staining or coating delamination on the DZ96319240524 bracket indicates corrosion penetration. If unchecked, this reduces material thickness and compromises load‑bearing capacity.
Cracks at bolt holes or cable slot junctions are evidence of fatigue. A cracked bracket must be replaced immediately to prevent cable detachment during gear shifting operations.
During transmission service, the bracket and cable retaining clips should be inspected for tightness and condition. Loose components allow cable movement that causes imprecise gear selection.
The DZ96319240524 bracket is specifically configured for the Shacman X5000 transmission shift cable interface, with slot dimensions and bolt pattern matching the factory‑specified mounting locations.
Fleet workshops should maintain spare fixing brackets and retaining clips for replacement during transmission service, ensuring continued secure shift cable mounting and precise gear control.
Aftermarket brackets with incorrect dimensions can misalign shift cables. We supply only the authentic Shacman X5000 Fixing Bracket/Gear Selection And Shift Flexible Shaft DZ96319240524 built to OEM specifications.
Each bracket is individually packaged with protective wrapping. The part number DZ96319240524 is clearly printed on the packaging for immediate identification and verification.
Our international logistics network ensures genuine DZ96319240524 fixing brackets are available for dispatch to dealerships and fleet maintenance facilities worldwide.
Complete fixing bracket with dual cable mounting slots and e‑coat finish. Ready for chassis installation with cable retaining clips.
Expert guidance on bracket installation and shift cable routing. We help ensure your DZ96319240524 bracket provides secure cable support for precise gear control.
For current stock availability on the genuine Fixing Bracket/Gear Selection And Shift Flexible Shaft DZ96319240524, please use the contact buttons above.
